[Fri May 10 14:25:28 2013] Detection parameters:
  Position = (417.4, 139.9) = 15 51 5.08 -54 22 48.4
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 13.9 +/- 4.4
  Background counts = 5.1
  Rate = 0.0001 +/- 5e-05

[Fri May 10 14:25:28 2013] Off-axis axis estimate = 3.55'
[Fri May 10 16:03:38 2013] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Fri May 10 16:03:38 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Fri May 10 16:03:38 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.072
[Fri May 10 16:03:38 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 0.70"
[Fri May 10 16:48:54 2013] fullrun_ccd7_acisf12554_pi14-548_cl_pass0_src34.ximg exists
[Fri May 10 16:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12554_pi14-548_cl_pass0_src34.csv
[Fri May 10 16:48:54 2013] fullrun_ccd7_acisf12554_pi14-548_cl_pass0_src34_1.ximg exists
[Fri May 10 16:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12554_pi14-548_cl_pass0_src34.csv
[Fri May 10 16:48:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12554_pi14-548_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12554_pi14-548_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:48:54 2013] fullrun_ccd7_acisf12554_pi14-548_cl_pass0_tfrozen_src34.ximg exists
[Fri May 10 16:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12554_pi14-548_cl_pass0_tfrozen_src34.csv
[Fri May 10 16:48:54 2013] fullrun_ccd7_acisf12554_pi14-548_cl_pass0_tfrozen_src34_1.ximg exists
[Fri May 10 16:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12554_pi14-548_cl_pass0_tfrozen_src34.csv
[Fri May 10 16:48:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12554_pi14-548_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12554_pi14-548_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:49:07 2013] Spatial fit model total counts = 16.713100, observed total counts = 26.000000
[Fri May 10 16:49:07 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 16:49:07 2013] Vigneting correction estimate = 1.000000
[Fri May 10 16:49:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 16:49:07 2013] Assessing source extent using major
[Fri May 10 16:49:07 2013] Source does appear to be extended
[Fri May 10 16:49:07 2013] Computing asymmetry using major and minor axis, asym = 1.02
[Fri May 10 16:49:07 2013] Deleting source due to low Poisson probability 0.9