[Fri May 10 14:24:56 2013] Detection parameters:
  Position = (1071.2, 873.1) = 15 51 23.10 -54 19 49.2
  Extent = 0.5" x 0.5", rotation angle = 159 degrees
  Source counts = 13.8 +/- 4.0
  Background counts = 2.2
  Rate = 0.0001 +/- 4e-05

[Fri May 10 14:24:57 2013] Off-axis axis estimate = 2.24'
[Fri May 10 15:41:40 2013] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Fri May 10 15:41:40 2013] Initial guess for spatial extent in simple fitting = 0.46"
[Fri May 10 15:41:40 2013] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.736
[Fri May 10 15:41:40 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 0.46"
[Fri May 10 16:03:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass0_src13.ximg exists
[Fri May 10 16:03:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12554_pi14-548_cl_pass0_src13.csv
[Fri May 10 16:03:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass0_src13_1.ximg exists
[Fri May 10 16:03:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12554_pi14-548_cl_pass0_src13.csv
[Fri May 10 16:03:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12554_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12554_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:03:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri May 10 16:03:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 10 16:03:38 2013] Fit fullrun_ccd6_acisf12554_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri May 10 16:49:01 2013] Spatial fit model total counts = 18.074300, observed total counts = 19.000000
[Fri May 10 16:49:01 2013] Offset between fit and detection position for source 2 = 0.683317 pixels
[Fri May 10 16:49:01 2013] 17.387940 total counts/ 1.868540 bgd. counts: snr = 11.353342
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.683317 pixels
  Position = (1071.6, 873.6) = 15 51 23.10 -54 19 49.1
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 15.5 +/- 4.2
  Background counts = 1.9
  Rate = 0.0002 +/- 4e-05
[Fri May 10 16:49:01 2013] Vigneting correction estimate = 1.000000
[Fri May 10 16:49:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 16:49:01 2013] Assessing source extent using major axis lower bound
[Fri May 10 16:49:01 2013] Source does appear to be extended
[Fri May 10 16:49:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 18:05:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 18:05:24 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Fri May 10 18:05:24 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.697
[Fri May 10 18:05:24 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 0.64"
[Fri May 10 18:27:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass1_src13.ximg exists
[Fri May 10 18:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12554_pi14-548_cl_pass1_src13.csv
[Fri May 10 18:27:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass1_src13_1.ximg exists
[Fri May 10 18:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12554_pi14-548_cl_pass1_src13.csv
[Fri May 10 18:27:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12554_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12554_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 18:27:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri May 10 18:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12554_pi14-548_cl_pass1_tfrozen_src13.csv
[Fri May 10 18:27:38 2013] fullrun_ccd6_acisf12554_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 10 18:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12554_pi14-548_cl_pass1_tfrozen_src13.csv
[Fri May 10 18:27:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12554_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12554_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 18:51:17 2013] Spatial fit model total counts = 16.983900, observed total counts = 19.000000
[Fri May 10 18:51:17 2013] Offset between fit and detection position for source 2 = 0.103131 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.103131 pixels
  Position = (1071.7, 873.6) = 15 51 23.10 -54 19 49.1
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Fri May 10 18:51:17 2013] Vigneting correction estimate = 1.000000
[Fri May 10 18:51:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 18:51:17 2013] Assessing source extent using major axis lower bound
[Fri May 10 18:51:17 2013] Source does appear to be extended
[Fri May 10 18:51:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 18:59:26 2013] Writing source region out to fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2_src.reg
[Fri May 10 18:59:26 2013] Extracting stamp from image fullrun_ccd6_acisf12554_pi14-548_cl_sm2.00.img.gz, (1042, 843) - (1102, 904)
[Fri May 10 18:59:26 2013] Writing fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2.gif
[Fri May 10 19:06:31 2013] Size of ../../acisf12554/products/events/fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2_src.evt.gz[events] = 16 counts
[Fri May 10 19:06:31 2013] Mean chipx,y = (959.00, 464.06)
[Fri May 10 19:06:31 2013] Mean tdetx,y = (3834.00, 2166.06)
[Fri May 10 19:06:31 2013] chipx,y range = (944.00-976.00, 449.00-482.00)
[Fri May 10 19:06:31 2013] Size of ../../acisf12554/products/events/fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 34 counts
[Fri May 10 19:06:33 2013] Not generating rmf since there are only 15 counts
[Fri May 10 19:06:33 2013] arf not found, will run specextract
[Fri May 10 19:06:59 2013] ../../acisf12554/products/spectra/fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2.warf not found
[Fri May 10 19:06:59 2013] ../../acisf12554/products/spectra/fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2.wrmf not found
[Fri May 10 19:06:59 2013] Removal of ../../acisf12554/products/spectra/fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2.soff failed
[Fri May 10 19:10:56 2013] Spectrum 2 has only 16 counts, deleting rmf
[Fri May 10 19:10:56 2013] 207.813
[Fri May 10 19:18:29 2013] Updating aperture counts using extracted products
[Fri May 10 19:18:29 2013] Total counts from fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2_src.pi.gz = 16.00
[Fri May 10 19:18:29 2013] Total counts from fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2_bgd.pi.gz = 34.00
[Fri May 10 19:18:29 2013] Got source and background scale factors 0.000001, 0.000016
[Fri May 10 19:18:29 2013] User source parameters:
  Position = (1071.7, 873.6) = 15 51 23.10 -54 19 49.1
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source aperture counts = 13.1 +/- 5.1
  Background aperture counts = 2.9
  Rate = 0.0001 +/- 5e-05

[Fri May 10 19:18:30 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 19:18:30 2013] Using photon index=1.80, rate=0.000166, arf fullrun_ccd6_acisf12554_pi14-548_pass1_cl_src2.arf
[Fri May 10 19:18:30 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 19:18:30 2013] Updating source flux to 2.8e-15
[Fri May 10 19:18:43 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting