[Wed Nov 30 23:42:29 2011] Detection parameters:
  Position = (144.6, 645.4) = 8 23 4.19 -42 55 2.2
  Extent = 0.8" x 0.5", rotation angle = 110 degrees
  Source counts = 22.5 +/- 8.7
  Background counts = 52.5
  Rate = 0.001 +/- 0.0005

[Wed Nov 30 23:42:31 2011] Off-axis axis estimate = 2.95'
[Thu Dec  1 05:57:17 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 05:57:17 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Thu Dec  1 05:57:17 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.817
[Thu Dec  1 05:57:17 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 0.57"
[Thu Dec  1 07:04:00 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass0_src43.ximg exists
[Thu Dec  1 07:04:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12548_pi14-548_cl_pass0_src43.csv
[Thu Dec  1 07:04:00 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass0_src43_1.ximg exists
[Thu Dec  1 07:04:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12548_pi14-548_cl_pass0_src43.csv
[Thu Dec  1 07:04:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12548_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12548_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 07:04:00 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Thu Dec  1 07:04:00 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Dec  1 07:04:00 2011] Fit fullrun_ccd3_acisf12548_pi14-548_cl_pass0_tfrozen_src43 appears to have run properly
[Thu Dec  1 07:04:42 2011] Spatial fit model total counts = 471.697000, observed total counts = 472.000000
[Thu Dec  1 07:04:42 2011] Offset between fit and detection position for source 27 = 2.964389 pixels
[Thu Dec  1 07:04:42 2011] 475.183600 total counts/ 425.814000 bgd. counts: snr = 2.392487
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.964389 pixels
  Position = (141.9, 644.1) = 8 23 4.33 -42 55 3.1
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 49.4 +/- 21.8
  Background counts = 425.8
  Rate = 0.003 +/- 0.001
[Thu Dec  1 07:04:42 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 07:04:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 07:04:42 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 07:04:42 2011] Source does appear to be extended
[Thu Dec  1 07:04:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 11:16:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 11:16:53 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Thu Dec  1 11:16:53 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Thu Dec  1 11:16:53 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 1.50"
[Thu Dec  1 12:17:27 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass1_src31.ximg exists
[Thu Dec  1 12:17:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12548_pi14-548_cl_pass1_src31.csv
[Thu Dec  1 12:17:27 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass1_src31_1.ximg exists
[Thu Dec  1 12:17:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12548_pi14-548_cl_pass1_src31.csv
[Thu Dec  1 12:17:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12548_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12548_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 12:17:28 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Thu Dec  1 12:17:28 2011] fullrun_ccd3_acisf12548_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Dec  1 12:17:28 2011] Fit fullrun_ccd3_acisf12548_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Dec  1 12:17:45 2011] Spatial fit model total counts = 614.770000, observed total counts = 614.000000
[Thu Dec  1 12:17:45 2011] Offset between fit and detection position for source 27 = 2.755054 pixels
[Thu Dec  1 12:17:45 2011] 618.106000 total counts/ 431.960000 bgd. counts: snr = 8.956368
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.755054 pixels
  Position = (144.3, 642.7) = 8 23 4.22 -42 55 3.8
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 186.1 +/- 24.9
  Background counts = 432.0
  Rate = 0.01 +/- 0.002
[Thu Dec  1 12:17:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 12:17:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 12:17:45 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 12:17:45 2011] Source does appear to be extended
[Thu Dec  1 12:17:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 13:00:21 2011] Writing source region out to fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27_src.reg
[Thu Dec  1 13:00:21 2011] Extracting stamp from image fullrun_ccd3_acisf12548_pi14-548_cl_sm2.00.img.gz, (7, 506) - (282, 780)
[Thu Dec  1 13:00:21 2011] Writing fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27.gif
[Thu Dec  1 13:18:04 2011] Size of ../../acisf12548/products/events/fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27_src.evt.gz[events] = 2800 counts
[Thu Dec  1 13:18:04 2011] Mean chipx,y = (999.28, 662.39)
[Thu Dec  1 13:18:04 2011] Mean tdetx,y = (4469.61, 4060.28)
[Thu Dec  1 13:18:04 2011] chipx,y range = (961.00-1023.00, 623.00-702.00)
[Thu Dec  1 13:18:04 2011] Size of ../../acisf12548/products/events/fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 16209 counts
[Thu Dec  1 13:18:06 2011] rmf not found, will run specextract
[Thu Dec  1 13:18:06 2011] arf not found, will run specextract
[Thu Dec  1 13:18:35 2011] ../../acisf12548/products/spectra/fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27.warf not found
[Thu Dec  1 13:18:35 2011] ../../acisf12548/products/spectra/fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27.wrmf not found
[Thu Dec  1 13:18:35 2011] Removal of ../../acisf12548/products/spectra/fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27.soff failed
[Thu Dec  1 13:20:17 2011] Keeping rmf generated by specextract
[Thu Dec  1 13:20:17 2011] 189.301
[Thu Dec  1 13:20:26 2011] Updating aperture counts using extracted products
[Thu Dec  1 13:20:26 2011] Error reading totcts from fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27_src.pi.gz
[Thu Dec  1 13:20:27 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 13:20:27 2011] Using photon index=1.80, rate=0.0115, arf fullrun_ccd3_acisf12548_pi14-548_pass1_cl_src27.arf
[Thu Dec  1 13:20:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Dec  1 13:20:27 2011] Updating source flux to 1.6e-13