[Tue May 21 17:02:37 2013] Detection parameters:
  Position = (343.7, 1201.9) = 17 18 37.34 -38 26 41.8
  Extent = 0.9" x 0.5", rotation angle = 72 degrees
  Source counts = 10.3 +/- 3.5
  Background counts = 1.7
  Rate = 0.0003 +/- 9e-05

[Tue May 21 17:02:37 2013] Off-axis axis estimate = 4.59'
[Tue May 21 17:31:46 2013] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Tue May 21 17:31:46 2013] Initial guess for spatial extent in simple fitting = 1.03"
[Tue May 21 17:31:46 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Tue May 21 17:31:46 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 1.03"
[Tue May 21 17:50:13 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass0_src15.ximg exists
[Tue May 21 17:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12547_pi14-548_cl_pass0_src15.csv
[Tue May 21 17:50:13 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass0_src15_1.ximg exists
[Tue May 21 17:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12547_pi14-548_cl_pass0_src15.csv
[Tue May 21 17:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12547_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12547_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 17:50:13 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Tue May 21 17:50:13 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 21 17:50:13 2013] Fit fullrun_ccd6_acisf12547_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Tue May 21 18:35:42 2013] Source 16 is offset by -1.211711 and -1.209307 pixels which is larger than
2 X fitted extent = 1.071801 x 5.466585, not incorporating fit results
[Tue May 21 18:35:42 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:35:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:35:42 2013] Assessing source extent using major
[Tue May 21 18:35:42 2013] Source does appear to be extended
[Tue May 21 18:35:42 2013] Computing asymmetry using major and minor axis, asym = 1.92
[Tue May 21 18:35:42 2013] Source is asymmetric
[Tue May 21 19:08:24 2013] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Tue May 21 19:08:24 2013] Initial guess for spatial extent in simple fitting = 1.03"
[Tue May 21 19:08:24 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Tue May 21 19:08:24 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 1.03"
[Tue May 21 19:26:05 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass1_src14.ximg exists
[Tue May 21 19:26:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12547_pi14-548_cl_pass1_src14.csv
[Tue May 21 19:26:05 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass1_src14_1.ximg exists
[Tue May 21 19:26:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12547_pi14-548_cl_pass1_src14.csv
[Tue May 21 19:26:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12547_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12547_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 19:26:06 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Tue May 21 19:26:06 2013] fullrun_ccd6_acisf12547_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Tue May 21 19:26:06 2013] Fit fullrun_ccd6_acisf12547_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Tue May 21 20:05:51 2013] Source 16 is offset by -1.211711 and -1.209307 pixels which is larger than
2 X fitted extent = 1.071801 x 5.466585, not incorporating fit results
[Tue May 21 20:05:51 2013] Vigneting correction estimate = 1.000000
[Tue May 21 20:05:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 20:05:51 2013] Assessing source extent using major
[Tue May 21 20:05:51 2013] Source does appear to be extended
[Tue May 21 20:05:51 2013] Computing asymmetry using major and minor axis, asym = 1.92
[Tue May 21 20:05:51 2013] Source is asymmetric
[Tue May 21 20:08:41 2013] Writing source region out to fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16_src.reg
[Tue May 21 20:08:41 2013] Extracting stamp from image fullrun_ccd6_acisf12547_pi14-548_cl_sm2.00.img.gz, (300, 1159) - (387, 1245)
[Tue May 21 20:08:41 2013] Writing fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16.gif
[Tue May 21 20:16:33 2013] Size of ../../acisf12547/products/events/fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16_src.evt.gz[events] = 12 counts
[Tue May 21 20:16:33 2013] Mean chipx,y = (945.50, 40.83)
[Tue May 21 20:16:33 2013] Mean tdetx,y = (3820.50, 1742.83)
[Tue May 21 20:16:33 2013] chipx,y range = (925.00-962.00, 25.00-60.00)
[Tue May 21 20:16:33 2013] Size of ../../acisf12547/products/events/fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 45 counts
[Tue May 21 20:16:34 2013] Not generating rmf since there are only 10 counts
[Tue May 21 20:16:34 2013] arf not found, will run specextract
[Tue May 21 20:16:43 2013] ../../acisf12547/products/spectra/fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16.warf not found
[Tue May 21 20:16:43 2013] ../../acisf12547/products/spectra/fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16.wrmf not found
[Tue May 21 20:16:43 2013] Removal of ../../acisf12547/products/spectra/fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16.soff failed
[Tue May 21 20:20:40 2013] Spectrum 16 has only 10 counts, deleting rmf
[Tue May 21 20:20:40 2013] 191.857
[Tue May 21 20:37:54 2013] Updating aperture counts using extracted products
[Tue May 21 20:37:54 2013] Total counts from fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16_src.pi.gz = 12.00
[Tue May 21 20:37:54 2013] Total counts from fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16_bgd.pi.gz = 45.00
[Tue May 21 20:37:54 2013] Got source and background scale factors 0.000001, 0.000031
[Tue May 21 20:37:54 2013] User source parameters:
  Position = (343.7, 1201.9) = 17 18 37.34 -38 26 41.8
  Extent = 0.9" x 0.5", rotation angle = 72
  Source aperture counts = 9.9 +/- 4.6
  Background aperture counts = 2.1
  Rate = 0.0002 +/- 0.0001

[Tue May 21 20:37:54 2013] Updating counts from extracted products
[Tue May 21 20:37:54 2013] Set source signif. to 9.88/1.45 = 6.80
[Tue May 21 20:37:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:37:55 2013] Using photon index=1.80, rate=0.00025, arf fullrun_ccd6_acisf12547_pi14-548_pass1_cl_src16.arf
[Tue May 21 20:37:55 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May 21 20:37:55 2013] Updating source flux to 4e-15
[Tue May 21 20:38:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting