[Fri Aug 17 22:01:08 2012] Detection parameters:
  Position = (883.2, 553.2) = 18 9 59.62 -23 37 29.4
  Extent = 0.5" x 0.5", rotation angle = 0 degrees
  Source counts = 24.9 +/- 5.1
  Background counts = 1.1
  Rate = 0.0008 +/- 0.0002

[Fri Aug 17 22:01:08 2012] Off-axis axis estimate = 4.32'
[Fri Aug 17 23:03:24 2012] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:24 2012] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Aug 17 23:03:24 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Fri Aug 17 23:03:24 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.93"
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src10.ximg exists
[Fri Aug 17 23:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src10.csv
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Aug 17 23:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src10.csv
[Fri Aug 17 23:28:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 17 23:28:29 2012] Fit fullrun_ccd2_acisf12546_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Aug 18 00:29:00 2012] Spatial fit model total counts = 46.487600, observed total counts = 49.000000
[Sat Aug 18 00:29:00 2012] Offset between fit and detection position for source 3 = 0.407852 pixels
[Sat Aug 18 00:29:00 2012] 47.731700 total counts/ 14.011500 bgd. counts: snr = 9.008403
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.407852 pixels
  Position = (883.1, 553.6) = 18 9 59.64 -23 37 29.4
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 33.7 +/- 6.9
  Background counts = 14.0
  Rate = 0.001 +/- 0.0002
[Sat Aug 18 00:29:00 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 00:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 00:29:00 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 00:29:00 2012] Source does appear to be extended
[Sat Aug 18 00:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:23:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:23:17 2012] Initial guess for spatial extent in simple fitting = 0.93"
[Sat Aug 18 01:23:17 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.655
[Sat Aug 18 01:23:17 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.93"
[Sat Aug 18 01:44:01 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src10.ximg exists
[Sat Aug 18 01:44:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src10.csv
[Sat Aug 18 01:44:01 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Aug 18 01:44:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src10.csv
[Sat Aug 18 01:44:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:44:02 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Aug 18 01:44:02 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Aug 18 01:44:02 2012] Fit fullrun_ccd2_acisf12546_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Aug 18 02:34:20 2012] Spatial fit model total counts = 46.861300, observed total counts = 49.000000
[Sat Aug 18 02:34:20 2012] Offset between fit and detection position for source 3 = 0.005790 pixels
[Sat Aug 18 02:34:20 2012] 48.420600 total counts/ 16.860700 bgd. counts: snr = 7.685955
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.005790 pixels
  Position = (883.0, 553.6) = 18 9 59.64 -23 37 29.4
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 31.6 +/- 7.0
  Background counts = 16.9
  Rate = 0.001 +/- 0.0002
[Sat Aug 18 02:34:20 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 02:34:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 02:34:20 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 02:34:20 2012] Source does appear to be extended
[Sat Aug 18 02:34:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 02:53:14 2012] Writing source region out to fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3_src.reg
[Sat Aug 18 02:53:14 2012] Extracting stamp from image fullrun_ccd2_acisf12546_pi14-548_cl_sm2.00.img.gz, (844, 515) - (922, 593)
[Sat Aug 18 02:53:14 2012] Writing fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3.gif
[Sat Aug 18 02:58:22 2012] Size of ../../acisf12546/products/events/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3_src.evt.gz[events] = 46 counts
[Sat Aug 18 02:58:22 2012] Mean chipx,y = (162.50, 541.26)
[Sat Aug 18 02:58:22 2012] Mean tdetx,y = (3602.26, 3923.50)
[Sat Aug 18 02:58:22 2012] chipx,y range = (145.00-178.00, 524.00-564.00)
[Sat Aug 18 02:58:22 2012] Size of ../../acisf12546/products/events/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 14 counts
[Sat Aug 18 02:58:23 2012] Not generating rmf since there are only 31 counts
[Sat Aug 18 02:58:23 2012] arf not found, will run specextract
[Sat Aug 18 02:58:54 2012] ../../acisf12546/products/spectra/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3.warf not found
[Sat Aug 18 02:58:54 2012] ../../acisf12546/products/spectra/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3.wrmf not found
[Sat Aug 18 02:58:54 2012] Removal of ../../acisf12546/products/spectra/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3.soff failed
[Sat Aug 18 03:06:11 2012] Spectrum 3 has only 32 counts, deleting rmf
[Sat Aug 18 03:06:11 2012] 184.184
[Sat Aug 18 03:14:47 2012] Updating aperture counts using extracted products
[Sat Aug 18 03:14:47 2012] Error reading totcts from fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Aug 18 03:14:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 03:14:47 2012] Using photon index=1.80, rate=0.00106, arf fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src3.arf
[Sat Aug 18 03:14:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 18 03:14:47 2012] Updating source flux to 1.4e-14
[Sat Aug 18 03:15:22 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting