[Fri Aug 17 22:01:08 2012] Detection parameters:
  Position = (990.7, 537.4) = 18 9 55.77 -23 37 37.2
  Extent = 1.0" x 0.5", rotation angle = 134 degrees
  Source counts = 25.2 +/- 5.2
  Background counts = 1.8
  Rate = 0.0008 +/- 0.0002

[Fri Aug 17 22:01:08 2012] Off-axis axis estimate = 4.36'
[Fri Aug 17 23:03:24 2012] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 23:03:24 2012] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Aug 17 23:03:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Fri Aug 17 23:03:24 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.94"
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src9.ximg exists
[Fri Aug 17 23:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src9.csv
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Aug 17 23:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src9.csv
[Fri Aug 17 23:28:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12546_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 17 23:28:29 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 17 23:28:29 2012] Fit fullrun_ccd2_acisf12546_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Aug 18 00:29:00 2012] Spatial fit model total counts = 28.211700, observed total counts = 30.000000
[Sat Aug 18 00:29:00 2012] Offset between fit and detection position for source 1 = 0.802118 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.802118 pixels
  Position = (991.0, 538.1) = 18 9 55.78 -23 37 37.1
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 27.6 +/- 5.2
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sat Aug 18 00:29:00 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 00:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 00:29:00 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 00:29:00 2012] Source does appear to be extended
[Sat Aug 18 00:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 01:23:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 01:23:17 2012] Initial guess for spatial extent in simple fitting = 1.04"
[Sat Aug 18 01:23:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.106
[Sat Aug 18 01:23:17 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 1.04"
[Sat Aug 18 01:44:01 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src9.ximg exists
[Sat Aug 18 01:44:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src9.csv
[Sat Aug 18 01:44:01 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src9_1.ximg exists
[Sat Aug 18 01:44:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src9.csv
[Sat Aug 18 01:44:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12546_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:44:02 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat Aug 18 01:44:02 2012] fullrun_ccd2_acisf12546_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Aug 18 01:44:02 2012] Fit fullrun_ccd2_acisf12546_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Aug 18 02:34:20 2012] Spatial fit model total counts = 27.024000, observed total counts = 28.000000
[Sat Aug 18 02:34:20 2012] Offset between fit and detection position for source 1 = 0.031896 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031896 pixels
  Position = (991.0, 538.1) = 18 9 55.78 -23 37 37.1
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 27.1 +/- 5.2
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sat Aug 18 02:34:20 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 02:34:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 02:34:20 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 02:34:20 2012] Source does appear to be extended
[Sat Aug 18 02:34:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 02:53:14 2012] Writing source region out to fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1_src.reg
[Sat Aug 18 02:53:14 2012] Extracting stamp from image fullrun_ccd2_acisf12546_pi14-548_cl_sm2.00.img.gz, (944, 491) - (1038, 585)
[Sat Aug 18 02:53:14 2012] Writing fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1.gif
[Sat Aug 18 02:57:43 2012] Size of ../../acisf12546/products/events/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1_src.evt.gz[events] = 28 counts
[Sat Aug 18 02:57:43 2012] Mean chipx,y = (52.00, 524.14)
[Sat Aug 18 02:57:43 2012] Mean tdetx,y = (3585.14, 4034.00)
[Sat Aug 18 02:57:43 2012] chipx,y range = (35.00-70.00, 510.00-546.00)
[Sat Aug 18 02:57:43 2012] Size of ../../acisf12546/products/events/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 43 counts
[Sat Aug 18 02:57:44 2012] Not generating rmf since there are only 27 counts
[Sat Aug 18 02:57:44 2012] arf not found, will run specextract
[Sat Aug 18 02:58:14 2012] ../../acisf12546/products/spectra/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1.warf not found
[Sat Aug 18 02:58:14 2012] ../../acisf12546/products/spectra/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1.wrmf not found
[Sat Aug 18 02:58:14 2012] Removal of ../../acisf12546/products/spectra/fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1.soff failed
[Sat Aug 18 03:06:11 2012] Spectrum 1 has only 27 counts, deleting rmf
[Sat Aug 18 03:06:11 2012] 188.669
[Sat Aug 18 03:14:47 2012] Updating aperture counts using extracted products
[Sat Aug 18 03:14:47 2012] Error reading totcts from fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Aug 18 03:14:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 03:14:47 2012] Using photon index=1.80, rate=0.000912, arf fullrun_ccd2_acisf12546_pi14-548_pass1_cl_src1.arf
[Sat Aug 18 03:14:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 18 03:14:47 2012] Updating source flux to 1.2e-14
[Sat Aug 18 03:15:22 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting