[Fri Aug 17 22:00:21 2012] Detection parameters:
  Position = (218.8, 402.6) = 18 9 46.17 -23 38 52.3
  Extent = 1.5" x 1.2", rotation angle = 180 degrees
  Source counts = 73.1 +/- 9.3
  Background counts = 12.9
  Rate = 0.002 +/- 0.0003

[Fri Aug 17 22:00:22 2012] Off-axis axis estimate = 6.02'
[Fri Aug 17 22:04:40 2012] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 22:04:40 2012] Initial guess for spatial extent in simple fitting = 1.64"
[Fri Aug 17 22:04:40 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.952
[Fri Aug 17 22:04:40 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 1.64"
[Fri Aug 17 22:41:52 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass0_src5.ximg exists
[Fri Aug 17 22:41:52 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12546_pi14-548_cl_pass0_src5.csv
[Fri Aug 17 22:41:52 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Aug 17 22:41:52 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12546_pi14-548_cl_pass0_src5.csv
[Fri Aug 17 22:41:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12546_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12546_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 22:41:52 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 17 22:41:52 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 17 22:41:52 2012] Fit fullrun_ccd0_acisf12546_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Aug 18 00:28:55 2012] Spatial fit model total counts = 167.011000, observed total counts = 169.000000
[Sat Aug 18 00:28:55 2012] Offset between fit and detection position for source 5 = 0.941497 pixels
[Sat Aug 18 00:28:55 2012] 133.558700 total counts/ 105.532000 bgd. counts: snr = 2.728223
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.941497 pixels
  Position = (218.0, 403.1) = 18 9 46.22 -23 38 52.3
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 28.0 +/- 11.6
  Background counts = 105.5
  Rate = 0.0009 +/- 0.0004
[Sat Aug 18 00:28:55 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 00:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 00:28:55 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 00:28:55 2012] Source does appear to be extended
[Sat Aug 18 00:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 00:29:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 00:29:27 2012] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Aug 18 00:29:27 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.995
[Sat Aug 18 00:29:27 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.49"
[Sat Aug 18 01:02:19 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass1_src5.ximg exists
[Sat Aug 18 01:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12546_pi14-548_cl_pass1_src5.csv
[Sat Aug 18 01:02:19 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Aug 18 01:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12546_pi14-548_cl_pass1_src5.csv
[Sat Aug 18 01:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12546_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12546_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 01:02:19 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Aug 18 01:02:19 2012] fullrun_ccd0_acisf12546_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Aug 18 01:02:19 2012] Fit fullrun_ccd0_acisf12546_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Aug 18 02:34:16 2012] Spatial fit model total counts = 127.612000, observed total counts = 128.000000
[Sat Aug 18 02:34:16 2012] Offset between fit and detection position for source 5 = 0.033116 pixels
[Sat Aug 18 02:34:16 2012] 102.969200 total counts/ 74.957200 bgd. counts: snr = 3.235470
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.033116 pixels
  Position = (217.9, 403.1) = 18 9 46.22 -23 38 52.3
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 28.0 +/- 10.1
  Background counts = 75.0
  Rate = 0.0009 +/- 0.0003
[Sat Aug 18 02:34:17 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 02:34:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 02:34:17 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 02:34:17 2012] Source does appear to be extended
[Sat Aug 18 02:34:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 02:34:41 2012] Writing source region out to fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5_src.reg
[Sat Aug 18 02:34:41 2012] Extracting stamp from image fullrun_ccd0_acisf12546_pi14-548_cl_sm2.00.img.gz, (196, 381) - (240, 425)
[Sat Aug 18 02:34:41 2012] Writing fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5.gif
[Sat Aug 18 02:36:57 2012] Size of ../../acisf12546/products/events/fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5_src.evt.gz[events] = 45 counts
[Sat Aug 18 02:36:57 2012] Mean chipx,y = (831.38, 381.20)
[Sat Aug 18 02:36:57 2012] Mean tdetx,y = (3442.20, 4300.62)
[Sat Aug 18 02:36:57 2012] chipx,y range = (811.00-846.00, 365.00-398.00)
[Sat Aug 18 02:36:57 2012] Size of ../../acisf12546/products/events/fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 15 counts
[Sat Aug 18 02:36:59 2012] Not generating rmf since there are only 28 counts
[Sat Aug 18 02:36:59 2012] arf not found, will run specextract
[Sat Aug 18 02:37:20 2012] ../../acisf12546/products/spectra/fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5.warf not found
[Sat Aug 18 02:37:20 2012] ../../acisf12546/products/spectra/fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5.wrmf not found
[Sat Aug 18 02:37:20 2012] Removal of ../../acisf12546/products/spectra/fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5.soff failed
[Sat Aug 18 02:47:36 2012] Spectrum 5 has only 28 counts, deleting rmf
[Sat Aug 18 02:47:36 2012] 180.143
[Sat Aug 18 03:14:46 2012] Updating aperture counts using extracted products
[Sat Aug 18 03:14:46 2012] Error reading totcts from fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Aug 18 03:14:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 03:14:47 2012] Using photon index=1.80, rate=0.000944, arf fullrun_ccd0_acisf12546_pi14-548_pass1_cl_src5.arf
[Sat Aug 18 03:14:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 18 03:14:47 2012] Updating source flux to 1.3e-14
[Sat Aug 18 03:14:51 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting