[Sat Dec 31 16:05:47 2011] Detection parameters:
  Position = (1097.1, 404.9) = 14 20 32.96 -60 50 27.6
  Extent = 0.8" x 0.5", rotation angle = 171 degrees
  Source counts = 21.3 +/- 4.9
  Background counts = 2.7
  Rate = 0.0002 +/- 5e-05

[Sat Dec 31 16:05:47 2011] Off-axis axis estimate = 4.43'
[Sat Dec 31 16:19:12 2011] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 16:19:12 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Sat Dec 31 16:19:12 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Sat Dec 31 16:19:12 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.97"
[Sat Dec 31 16:41:12 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass0_src6.ximg exists
[Sat Dec 31 16:41:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12545_pi14-548_cl_pass0_src6.csv
[Sat Dec 31 16:41:12 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Dec 31 16:41:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf12545_pi14-548_cl_pass0_src6.csv
[Sat Dec 31 16:41:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12545_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12545_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 16:41:12 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Dec 31 16:41:12 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Dec 31 16:41:12 2011] Fit fullrun_ccd1_acisf12545_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Dec 31 23:03:36 2011] Spatial fit model total counts = 22.688800, observed total counts = 24.000000
[Sat Dec 31 23:03:36 2011] Offset between fit and detection position for source 27 = 0.722350 pixels
[Sat Dec 31 23:03:36 2011] 22.695600 total counts/ 0.000000 bgd. counts: snr = 1322463016044205.750000
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.722350 pixels
  Position = (1097.6, 405.4) = 14 20 32.96 -60 50 27.5
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 22.7 +/- 4.8
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Sat Dec 31 23:03:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 23:03:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 23:03:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 23:03:36 2011] Source does appear to be extended
[Sat Dec 31 23:03:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 23:10:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 23:10:10 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Sat Dec 31 23:10:10 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.138
[Sat Dec 31 23:10:10 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.91"
[Sat Dec 31 23:29:33 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass1_src6.ximg exists
[Sat Dec 31 23:29:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12545_pi14-548_cl_pass1_src6.csv
[Sat Dec 31 23:29:33 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Dec 31 23:29:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12545_pi14-548_cl_pass1_src6.csv
[Sat Dec 31 23:29:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12545_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12545_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 23:29:33 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Dec 31 23:29:33 2011] fullrun_ccd1_acisf12545_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Dec 31 23:29:33 2011] Fit fullrun_ccd1_acisf12545_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jan  1 01:05:38 2012] Spatial fit model total counts = 22.587100, observed total counts = 24.000000
[Sun Jan  1 01:05:38 2012] Offset between fit and detection position for source 27 = 0.089450 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.089450 pixels
  Position = (1097.5, 405.4) = 14 20 32.97 -60 50 27.6
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 22.6 +/- 4.8
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Sun Jan  1 01:05:38 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 01:05:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 01:05:38 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 01:05:38 2012] Source does appear to be extended
[Sun Jan  1 01:05:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 01:08:09 2012] Writing source region out to fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27_src.reg
[Sun Jan  1 01:08:09 2012] Extracting stamp from image fullrun_ccd1_acisf12545_pi14-548_cl_sm2.00.img.gz, (1057, 364) - (1139, 446)
[Sun Jan  1 01:08:09 2012] Writing fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27.gif
[Sun Jan  1 01:10:44 2012] Size of ../../acisf12545/products/events/fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27_src.evt.gz[events] = 24 counts
[Sun Jan  1 01:10:44 2012] Mean chipx,y = (21.83, 495.96)
[Sun Jan  1 01:10:44 2012] Mean tdetx,y = (4636.04, 4128.83)
[Sun Jan  1 01:10:44 2012] chipx,y range = (2.00-36.00, 478.00-516.00)
[Sun Jan  1 01:10:44 2012] Size of ../../acisf12545/products/events/fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 49 counts
[Sun Jan  1 01:10:45 2012] Not generating rmf since there are only 22 counts
[Sun Jan  1 01:10:45 2012] arf not found, will run specextract
[Sun Jan  1 01:11:08 2012] ../../acisf12545/products/spectra/fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27.warf not found
[Sun Jan  1 01:11:08 2012] ../../acisf12545/products/spectra/fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27.wrmf not found
[Sun Jan  1 01:11:08 2012] Removal of ../../acisf12545/products/spectra/fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27.soff failed
[Sun Jan  1 01:20:46 2012] Spectrum 27 has only 23 counts, deleting rmf
[Sun Jan  1 01:20:46 2012] 185.275
[Sun Jan  1 01:53:17 2012] Updating aperture counts using extracted products
[Sun Jan  1 01:53:17 2012] Error reading totcts from fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27_src.pi.gz
[Sun Jan  1 01:53:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 01:53:17 2012] Using photon index=1.80, rate=0.000253, arf fullrun_ccd1_acisf12545_pi14-548_pass1_cl_src27.arf
[Sun Jan  1 01:53:17 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jan  1 01:53:17 2012] Updating source flux to 4.6e-15
[Sun Jan  1 01:53:30 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting