[Mon May 13 07:29:32 2013] Detection parameters:
  Position = (279.1, 436.9) = 19 8 25.19 -38 7 42.0
  Extent = 1.2" x 0.9", rotation angle = 141 degrees
  Source counts = 14.4 +/- 4.0
  Background counts = 1.6
  Rate = 0.0007 +/- 0.0002

[Mon May 13 07:29:32 2013] Off-axis axis estimate = 7.27'
[Mon May 13 07:49:18 2013] Using EEF radius (= 2.34 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:49:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 07:49:18 2013] Initial guess for spatial extent in simple fitting = 2.34"
[Mon May 13 07:49:18 2013] source mask rpix=4.8, npix_max = 110, mask sum = 100, frac = 0.902
[Mon May 13 07:49:18 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 2.34"
[Mon May 13 07:54:23 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass0_src3.ximg exists
[Mon May 13 07:54:23 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass0_src3_1.ximg exists
[Mon May 13 07:54:23 2013] Fit fullrun_ccd6_acisf12543_pi14-548_cl_pass0_src3 appears to have run properly
[Mon May 13 07:54:23 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon May 13 07:54:23 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 13 07:54:23 2013] Fit fullrun_ccd6_acisf12543_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 13 08:05:00 2013] Spatial fit model total counts = 30.493600, observed total counts = 29.000000
[Mon May 13 08:05:00 2013] Offset between fit and detection position for source 3 = 1.088340 pixels
[Mon May 13 08:05:00 2013] 29.463000 total counts/ 17.199600 bgd. counts: snr = 2.957003
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.088340 pixels
  Position = (280.1, 437.1) = 19 8 25.17 -38 7 42.1
  Extent = 1.3 (0.9-1.9)", rotation angle = 0
  Source counts = 12.3 +/- 5.4
  Background counts = 17.2
  Rate = 0.0006 +/- 0.0003
[Mon May 13 08:05:00 2013] Vigneting correction estimate = 1.000000
[Mon May 13 08:05:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 08:05:00 2013] Assessing source extent using major axis lower bound
[Mon May 13 08:05:00 2013] Source does appear to be extended
[Mon May 13 08:05:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 08:19:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 08:19:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 08:19:29 2013] Initial guess for spatial extent in simple fitting = 1.25"
[Mon May 13 08:19:29 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Mon May 13 08:19:29 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 1.25"
[Mon May 13 08:24:06 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass1_src3.ximg exists
[Mon May 13 08:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12543_pi14-548_cl_pass1_src3.csv
[Mon May 13 08:24:06 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass1_src3_1.ximg exists
[Mon May 13 08:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12543_pi14-548_cl_pass1_src3.csv
[Mon May 13 08:24:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12543_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12543_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 08:24:06 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon May 13 08:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12543_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon May 13 08:24:06 2013] fullrun_ccd6_acisf12543_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 13 08:24:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12543_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon May 13 08:24:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12543_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12543_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 08:34:28 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Mon May 13 08:34:28 2013] Vigneting correction estimate = 1.000000
[Mon May 13 08:34:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 08:34:28 2013] Assessing source extent using major axis lower bound
[Mon May 13 08:34:28 2013] Source does appear to be extended
[Mon May 13 08:34:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 08:35:51 2013] Writing source region out to fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3_src.reg
[Mon May 13 08:35:51 2013] Extracting stamp from image fullrun_ccd6_acisf12543_pi14-548_cl_sm2.00.img.gz, (223, 380) - (337, 494)
[Mon May 13 08:35:51 2013] Writing fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3.gif
[Mon May 13 08:37:07 2013] Size of ../../acisf12543/products/events/fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3_src.evt.gz[events] = 18 counts
[Mon May 13 08:37:07 2013] Mean chipx,y = (385.83, 257.50)
[Mon May 13 08:37:07 2013] Mean tdetx,y = (3260.83, 1959.50)
[Mon May 13 08:37:07 2013] chipx,y range = (364.00-408.00, 236.00-279.00)
[Mon May 13 08:37:07 2013] Size of ../../acisf12543/products/events/fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 17 counts
[Mon May 13 08:37:08 2013] Not generating rmf since there are only 12 counts
[Mon May 13 08:37:08 2013] arf not found, will run specextract
[Mon May 13 08:37:30 2013] ../../acisf12543/products/spectra/fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3.warf not found
[Mon May 13 08:37:30 2013] ../../acisf12543/products/spectra/fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3.wrmf not found
[Mon May 13 08:37:30 2013] Removal of ../../acisf12543/products/spectra/fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3.soff failed
[Mon May 13 08:38:42 2013] Spectrum 3 has only 12 counts, deleting rmf
[Mon May 13 08:38:42 2013] 168.06
[Mon May 13 08:44:05 2013] Updating aperture counts using extracted products
[Mon May 13 08:44:05 2013] Total counts from fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3_src.pi.gz = 18.00
[Mon May 13 08:44:05 2013] Total counts from fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3_bgd.pi.gz = 17.00
[Mon May 13 08:44:05 2013] Got source and background scale factors 0.000005, 0.000057
[Mon May 13 08:44:05 2013] User source parameters:
  Position = (280.1, 437.1) = 19 8 25.17 -38 7 42.1
  Extent = 1.3 (0.9-1.9)", rotation angle = 0
  Source aperture counts = 16.6 +/- 5.3
  Background aperture counts = 1.4
  Rate = 0.0008 +/- 0.0003

[Mon May 13 08:44:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 08:44:06 2013] Using photon index=1.80, rate=0.00062, arf fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3.arf
[Mon May 13 08:44:06 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 08:44:06 2013] Updating source flux to 7.8e-15
[Mon May 13 08:44:12 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 08:44:13 2013] acisf12543/analysis//spectral/fullrun_ccd6_acisf12543_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete