[Thu Jul 19 01:52:08 2012] Detection parameters:
  Position = (156.4, 803.2) = 16 33 16.83 -47 36 32.3
  Extent = 0.5" x 0.5", rotation angle = 82 degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.3
  Rate = 0.0007 +/- 0.0002

[Thu Jul 19 01:52:08 2012] Off-axis axis estimate = 2.25'
[Thu Jul 19 02:05:59 2012] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 02:05:59 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Thu Jul 19 02:05:59 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.100
[Thu Jul 19 02:05:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.46"
[Thu Jul 19 02:17:30 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass0_src5.ximg exists
[Thu Jul 19 02:17:30 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Jul 19 02:17:30 2012] Fit fullrun_ccd1_acisf12533_pi14-548_cl_pass0_src5 appears to have run properly
[Thu Jul 19 02:17:30 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Jul 19 02:17:30 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jul 19 02:17:30 2012] Fit fullrun_ccd1_acisf12533_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jul 19 02:40:31 2012] Spatial fit model total counts = 13.096100, observed total counts = 14.000000
[Thu Jul 19 02:40:31 2012] Offset between fit and detection position for source 2 = 0.742883 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.742883 pixels
  Position = (156.8, 803.8) = 16 33 16.83 -47 36 32.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Thu Jul 19 02:40:31 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 02:40:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 02:40:31 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 02:40:31 2012] Source does appear to be extended
[Thu Jul 19 02:40:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 02:51:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 02:51:48 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Thu Jul 19 02:51:48 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.036
[Thu Jul 19 02:51:48 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.48"
[Thu Jul 19 03:01:36 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass1_src5.ximg exists
[Thu Jul 19 03:01:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12533_pi14-548_cl_pass1_src5.csv
[Thu Jul 19 03:01:36 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Jul 19 03:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12533_pi14-548_cl_pass1_src5.csv
[Thu Jul 19 03:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12533_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12533_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 03:01:37 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Jul 19 03:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12533_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu Jul 19 03:01:37 2012] fullrun_ccd1_acisf12533_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jul 19 03:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12533_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu Jul 19 03:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12533_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12533_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 03:23:46 2012] Spatial fit model total counts = 12.980300, observed total counts = 14.000000
[Thu Jul 19 03:23:46 2012] Offset between fit and detection position for source 2 = 0.139349 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.139349 pixels
  Position = (156.9, 803.7) = 16 33 16.82 -47 36 32.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.0 +/- 3.6
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Thu Jul 19 03:23:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 03:23:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 03:23:46 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 03:23:46 2012] Source does appear to be extended
[Thu Jul 19 03:23:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 03:29:43 2012] Writing source region out to fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2_src.reg
[Thu Jul 19 03:29:43 2012] Extracting stamp from image fullrun_ccd1_acisf12533_pi14-548_cl_sm2.00.img.gz, (135, 782) - (179, 826)
[Thu Jul 19 03:29:43 2012] Writing fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2.gif
[Thu Jul 19 03:32:11 2012] Size of ../../acisf12533/products/events/fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2_src.evt.gz[events] = 14 counts
[Thu Jul 19 03:32:11 2012] Mean chipx,y = (170.43, 923.79)
[Thu Jul 19 03:32:11 2012] Mean tdetx,y = (4208.21, 4277.43)
[Thu Jul 19 03:32:11 2012] chipx,y range = (153.00-184.00, 906.00-938.00)
[Thu Jul 19 03:32:11 2012] Size of ../../acisf12533/products/events/fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 3 counts
[Thu Jul 19 03:32:13 2012] Not generating rmf since there are only 12 counts
[Thu Jul 19 03:32:13 2012] arf not found, will run specextract
[Thu Jul 19 03:32:45 2012] ../../acisf12533/products/spectra/fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2.warf not found
[Thu Jul 19 03:32:45 2012] ../../acisf12533/products/spectra/fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2.wrmf not found
[Thu Jul 19 03:32:45 2012] Removal of ../../acisf12533/products/spectra/fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2.soff failed
[Thu Jul 19 03:33:34 2012] Spectrum 2 has only 13 counts, deleting rmf
[Thu Jul 19 03:33:34 2012] 202.786
[Thu Jul 19 03:44:06 2012] Updating aperture counts using extracted products
[Thu Jul 19 03:44:06 2012] Error reading totcts from fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Jul 19 03:44:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 03:44:06 2012] Using photon index=1.80, rate=0.000666, arf fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2.arf
[Thu Jul 19 03:44:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 19 03:44:06 2012] Updating source flux to 1.1e-14
[Thu Jul 19 03:44:13 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul 19 03:44:14 2012] acisf12533/analysis//spectral/fullrun_ccd1_acisf12533_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete