[Thu Jul 19 01:51:35 2012] Detection parameters:
  Position = (950.3, 1019.8) = 16 33 23.25 -47 38 30.6
  Extent = 0.8" x 0.5", rotation angle = 106 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0002

[Thu Jul 19 01:51:36 2012] Off-axis axis estimate = 3.55'
[Thu Jul 19 01:56:06 2012] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 01:56:06 2012] Initial guess for spatial extent in simple fitting = 0.70"
[Thu Jul 19 01:56:06 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.072
[Thu Jul 19 01:56:06 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.70"
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src5.ximg exists
[Thu Jul 19 02:05:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src5.csv
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Jul 19 02:05:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src5.csv
[Thu Jul 19 02:05:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jul 19 02:05:59 2012] Fit fullrun_ccd0_acisf12533_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jul 19 02:40:30 2012] Spatial fit model total counts = 11.539200, observed total counts = 11.000000
[Thu Jul 19 02:40:30 2012] Offset between fit and detection position for source 7 = 0.784594 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.784594 pixels
  Position = (950.9, 1020.3) = 16 33 23.24 -47 38 30.6
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Thu Jul 19 02:40:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 02:40:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 02:40:30 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 02:40:30 2012] Source does appear to be extended
[Thu Jul 19 02:40:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 02:40:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 02:40:46 2012] Initial guess for spatial extent in simple fitting = 0.82"
[Thu Jul 19 02:40:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Thu Jul 19 02:40:46 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.82"
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src5.ximg exists
[Thu Jul 19 02:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src5.csv
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Jul 19 02:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src5.csv
[Thu Jul 19 02:51:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jul 19 02:51:48 2012] Fit fullrun_ccd0_acisf12533_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jul 19 03:23:46 2012] Spatial fit model total counts = 11.536400, observed total counts = 11.000000
[Thu Jul 19 03:23:46 2012] Offset between fit and detection position for source 7 = 0.136855 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.136855 pixels
  Position = (950.9, 1020.4) = 16 33 23.24 -47 38 30.6
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Thu Jul 19 03:23:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 03:23:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 03:23:46 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 03:23:46 2012] Source does appear to be extended
[Thu Jul 19 03:23:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 03:24:01 2012] Writing source region out to fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7_src.reg
[Thu Jul 19 03:24:01 2012] Extracting stamp from image fullrun_ccd0_acisf12533_pi14-548_cl_sm2.00.img.gz, (914, 983) - (988, 1057)
[Thu Jul 19 03:24:01 2012] Writing fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7.gif
[Thu Jul 19 03:27:17 2012] Size of ../../acisf12533/products/events/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7_src.evt.gz[events] = 11 counts
[Thu Jul 19 03:27:17 2012] Mean chipx,y = (703.36, 921.00)
[Thu Jul 19 03:27:17 2012] Mean tdetx,y = (3982.00, 4428.64)
[Thu Jul 19 03:27:17 2012] chipx,y range = (685.00-718.00, 905.00-939.00)
[Thu Jul 19 03:27:17 2012] Size of ../../acisf12533/products/events/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 6 counts
[Thu Jul 19 03:27:18 2012] Not generating rmf since there are only 11 counts
[Thu Jul 19 03:27:18 2012] arf not found, will run specextract
[Thu Jul 19 03:27:46 2012] ../../acisf12533/products/spectra/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7.warf not found
[Thu Jul 19 03:27:46 2012] ../../acisf12533/products/spectra/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7.wrmf not found
[Thu Jul 19 03:27:46 2012] Removal of ../../acisf12533/products/spectra/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7.soff failed
[Thu Jul 19 03:29:42 2012] Spectrum 7 has only 12 counts, deleting rmf
[Thu Jul 19 03:29:42 2012] 193.922
[Thu Jul 19 03:44:06 2012] Updating aperture counts using extracted products
[Thu Jul 19 03:44:06 2012] Error reading totcts from fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7_src.pi.gz
[Thu Jul 19 03:44:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 03:44:06 2012] Using photon index=1.80, rate=0.000592, arf fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src7.arf
[Thu Jul 19 03:44:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 19 03:44:06 2012] Updating source flux to 1e-14
[Thu Jul 19 03:44:08 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting