[Thu Jul 19 01:51:35 2012] Detection parameters:
  Position = (217.1, 562.1) = 16 33 58.98 -47 42 15.5
  Extent = 3.7" x 2.6", rotation angle = 67 degrees
  Source counts = 120.7 +/- 11.9
  Background counts = 20.3
  Rate = 0.006 +/- 0.0006

[Thu Jul 19 01:51:36 2012] Off-axis axis estimate = 9.08'
[Thu Jul 19 01:56:06 2012] Using EEF radius (= 3.64 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 01:56:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 01:56:06 2012] Initial guess for spatial extent in simple fitting = 3.64"
[Thu Jul 19 01:56:06 2012] source mask rpix=7.4, npix_max = 249, mask sum = 256, frac = 1.025
[Thu Jul 19 01:56:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.64"
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src1.ximg exists
[Thu Jul 19 02:05:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src1.csv
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jul 19 02:05:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src1.csv
[Thu Jul 19 02:05:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12533_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 19 02:05:59 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 19 02:05:59 2012] Fit fullrun_ccd0_acisf12533_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 19 02:40:30 2012] Spatial fit model total counts = 146.879000, observed total counts = 147.000000
[Thu Jul 19 02:40:30 2012] Offset between fit and detection position for source 1 = 0.963768 pixels
[Thu Jul 19 02:40:30 2012] 146.787600 total counts/ 18.471600 bgd. counts: snr = 29.855789
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.963768 pixels
  Position = (217.9, 562.7) = 16 33 58.97 -47 42 15.5
  Extent = 3.9 (3.4-4.5)", rotation angle = 0
  Source counts = 128.3 +/- 12.1
  Background counts = 18.5
  Rate = 0.007 +/- 0.0006
[Thu Jul 19 02:40:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 02:40:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 02:40:30 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 02:40:30 2012] Source does appear to be extended
[Thu Jul 19 02:40:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 02:40:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 02:40:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 02:40:46 2012] Initial guess for spatial extent in simple fitting = 3.92"
[Thu Jul 19 02:40:46 2012] source mask rpix=8.0, npix_max = 287, mask sum = 289, frac = 1.007
[Thu Jul 19 02:40:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.92"
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src1.ximg exists
[Thu Jul 19 02:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src1.csv
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jul 19 02:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src1.csv
[Thu Jul 19 02:51:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12533_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 19 02:51:48 2012] fullrun_ccd0_acisf12533_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 19 02:51:48 2012] Fit fullrun_ccd0_acisf12533_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 19 03:23:46 2012] Spatial fit model total counts = 151.494000, observed total counts = 151.000000
[Thu Jul 19 03:23:46 2012] Offset between fit and detection position for source 1 = 0.302152 pixels
[Thu Jul 19 03:23:46 2012] 151.446300 total counts/ 25.591300 bgd. counts: snr = 24.878506
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.302152 pixels
  Position = (217.7, 562.9) = 16 33 58.98 -47 42 15.3
  Extent = 3.8 (3.4-4.4)", rotation angle = 0
  Source counts = 125.9 +/- 12.3
  Background counts = 25.6
  Rate = 0.006 +/- 0.0006
[Thu Jul 19 03:23:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 03:23:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 03:23:46 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 03:23:46 2012] Source does appear to be extended
[Thu Jul 19 03:23:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 03:24:01 2012] Writing source region out to fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1_src.reg
[Thu Jul 19 03:24:01 2012] Extracting stamp from image fullrun_ccd0_acisf12533_pi14-548_cl_sm2.00.img.gz, (43, 388) - (392, 738)
[Thu Jul 19 03:24:01 2012] Writing fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1.gif
[Thu Jul 19 03:24:03 2012] Size of ../../acisf12533/products/events/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1_src.evt.gz[events] = 143 counts
[Thu Jul 19 03:24:03 2012] Mean chipx,y = (623.73, 56.76)
[Thu Jul 19 03:24:03 2012] Mean tdetx,y = (3117.76, 4508.27)
[Thu Jul 19 03:24:03 2012] chipx,y range = (591.00-661.00, 22.00-98.00)
[Thu Jul 19 03:24:03 2012] Size of ../../acisf12533/products/events/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 138 counts
[Thu Jul 19 03:24:04 2012] rmf not found, will run specextract
[Thu Jul 19 03:24:04 2012] arf not found, will run specextract
[Thu Jul 19 03:24:13 2012] ../../acisf12533/products/spectra/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1.warf not found
[Thu Jul 19 03:24:13 2012] ../../acisf12533/products/spectra/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1.wrmf not found
[Thu Jul 19 03:24:13 2012] Removal of ../../acisf12533/products/spectra/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1.soff failed
[Thu Jul 19 03:29:42 2012] Keeping rmf generated by specextract
[Thu Jul 19 03:29:42 2012] 150.238
[Thu Jul 19 03:44:06 2012] Updating aperture counts using extracted products
[Thu Jul 19 03:44:06 2012] Error reading totcts from fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Jul 19 03:44:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 03:44:06 2012] Using photon index=1.80, rate=0.00645, arf fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1.arf
[Thu Jul 19 03:44:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 19 03:44:06 2012] Updating source flux to 1.4e-13
[Thu Jul 19 03:44:13 2012] Reading fit data from acisf12533/analysis//spectral/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1_pl.csv
[Thu Jul 19 03:44:13 2012] Spectral fit parameter nH value = 1.89869e+23
[Thu Jul 19 03:44:13 2012] Spectral fit parameter PhoIndex value = 4.70147
[Thu Jul 19 03:44:13 2012] Failed to get F(0.3-8.0) from acisf12533/analysis//spectral/fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 19 03:44:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 03:44:13 2012] Using Nh = 1.9e+23, photon index=4.70, rate=0.00645, arf fullrun_ccd0_acisf12533_pi14-548_pass1_cl_src1.arf
[Thu Jul 19 03:44:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 19 03:44:13 2012] Updating source flux to 1.8e-13