[Wed Jun 27 06:57:07 2012] Detection parameters:
  Position = (911.6, 1102.7) = 16 34 17.99 -47 45 57.5
  Extent = 0.6" x 0.5", rotation angle = 47 degrees
  Source counts = 27.4 +/- 5.3
  Background counts = 0.6
  Rate = 0.001 +/- 0.0003

[Wed Jun 27 06:57:07 2012] Off-axis axis estimate = 2.81'
[Wed Jun 27 07:01:48 2012] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:01:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 07:01:48 2012] Initial guess for spatial extent in simple fitting = 0.54"
[Wed Jun 27 07:01:48 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.873
[Wed Jun 27 07:01:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.54"
[Wed Jun 27 07:13:40 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass0_src1.ximg exists
[Wed Jun 27 07:13:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12532_pi14-548_cl_pass0_src1.csv
[Wed Jun 27 07:13:40 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Jun 27 07:13:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12532_pi14-548_cl_pass0_src1.csv
[Wed Jun 27 07:13:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12532_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12532_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 07:13:40 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 07:13:40 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 07:13:40 2012] Fit fullrun_ccd0_acisf12532_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 27 07:37:24 2012] Spatial fit model total counts = 28.866200, observed total counts = 29.000000
[Wed Jun 27 07:37:24 2012] Offset between fit and detection position for source 1 = 0.802652 pixels
[Wed Jun 27 07:37:24 2012] 28.582670 total counts/ 4.237870 bgd. counts: snr = 11.825851
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.802652 pixels
  Position = (912.2, 1103.1) = 16 34 17.98 -47 45 57.5
  Extent = 0.4 (0.4-0.7)", rotation angle = 0
  Source counts = 24.3 +/- 5.3
  Background counts = 4.2
  Rate = 0.001 +/- 0.0003
[Wed Jun 27 07:37:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 07:37:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 07:37:24 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 07:37:24 2012] Source does appear to be extended
[Wed Jun 27 07:37:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 07:37:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 07:37:39 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Jun 27 07:37:39 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.137
[Wed Jun 27 07:37:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.45"
[Wed Jun 27 07:49:02 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass1_src1.ximg exists
[Wed Jun 27 07:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12532_pi14-548_cl_pass1_src1.csv
[Wed Jun 27 07:49:02 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Jun 27 07:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12532_pi14-548_cl_pass1_src1.csv
[Wed Jun 27 07:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12532_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12532_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 07:49:02 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 27 07:49:02 2012] fullrun_ccd0_acisf12532_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 27 07:49:02 2012] Fit fullrun_ccd0_acisf12532_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 27 08:05:15 2012] Spatial fit model total counts = 28.991000, observed total counts = 29.000000
[Wed Jun 27 08:05:15 2012] Offset between fit and detection position for source 1 = 0.027327 pixels
[Wed Jun 27 08:05:15 2012] 28.952870 total counts/ 4.603870 bgd. counts: snr = 11.348007
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.027327 pixels
  Position = (912.3, 1103.1) = 16 34 17.98 -47 45 57.5
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 24.3 +/- 5.4
  Background counts = 4.6
  Rate = 0.001 +/- 0.0003
[Wed Jun 27 08:05:15 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 08:05:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 08:05:15 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 08:05:15 2012] Source does appear to be extended
[Wed Jun 27 08:05:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 08:05:31 2012] Writing source region out to fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1_src.reg
[Wed Jun 27 08:05:31 2012] Extracting stamp from image fullrun_ccd0_acisf12532_pi14-548_cl_sm2.00.img.gz, (892, 1083) - (932, 1123)
[Wed Jun 27 08:05:31 2012] Writing fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1.gif
[Wed Jun 27 08:05:33 2012] Size of ../../acisf12532/products/events/fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1_src.evt.gz[events] = 26 counts
[Wed Jun 27 08:05:33 2012] Mean chipx,y = (804.42, 915.38)
[Wed Jun 27 08:05:33 2012] Mean tdetx,y = (3976.38, 4327.58)
[Wed Jun 27 08:05:33 2012] chipx,y range = (785.00-817.00, 900.00-932.00)
[Wed Jun 27 08:05:33 2012] Size of ../../acisf12532/products/events/fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3 counts
[Wed Jun 27 08:05:34 2012] Not generating rmf since there are only 24 counts
[Wed Jun 27 08:05:34 2012] arf not found, will run specextract
[Wed Jun 27 08:06:08 2012] ../../acisf12532/products/spectra/fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1.warf not found
[Wed Jun 27 08:06:08 2012] ../../acisf12532/products/spectra/fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1.wrmf not found
[Wed Jun 27 08:06:08 2012] Removal of ../../acisf12532/products/spectra/fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1.soff failed
[Wed Jun 27 08:08:52 2012] Spectrum 1 has only 24 counts, deleting rmf
[Wed Jun 27 08:08:52 2012] 197.565
[Wed Jun 27 08:22:36 2012] Updating aperture counts using extracted products
[Wed Jun 27 08:22:36 2012] Error reading totcts from fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Jun 27 08:22:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 08:22:36 2012] Using photon index=1.80, rate=0.00125, arf fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1.arf
[Wed Jun 27 08:22:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jun 27 08:22:36 2012] Updating source flux to 2.2e-14
[Wed Jun 27 08:22:39 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 27 08:22:44 2012] acisf12532/analysis//spectral/fullrun_ccd0_acisf12532_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete