[Fri Jun 29 23:30:51 2012] Detection parameters:
  Position = (701.0, 958.5) = 16 35 43.39 -47 47 37.4
  Extent = 1.3" x 1.0", rotation angle = 10 degrees
  Source counts = 35.2 +/- 6.2
  Background counts = 2.8
  Rate = 0.002 +/- 0.0003

[Fri Jun 29 23:30:51 2012] Off-axis axis estimate = 6.48'
[Fri Jun 29 23:36:21 2012] Using EEF radius (= 1.88 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 23:36:21 2012] Initial guess for spatial extent in simple fitting = 1.88"
[Fri Jun 29 23:36:21 2012] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.964
[Fri Jun 29 23:36:21 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 1.88"
[Fri Jun 29 23:46:30 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass0_src3.ximg exists
[Fri Jun 29 23:46:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12531_pi14-548_cl_pass0_src3.csv
[Fri Jun 29 23:46:30 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Jun 29 23:46:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12531_pi14-548_cl_pass0_src3.csv
[Fri Jun 29 23:46:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12531_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12531_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 23:46:30 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 29 23:46:30 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 29 23:46:30 2012] Fit fullrun_ccd2_acisf12531_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 30 00:00:17 2012] Spatial fit model total counts = 40.877200, observed total counts = 41.000000
[Sat Jun 30 00:00:17 2012] Offset between fit and detection position for source 3 = 1.213433 pixels
[Sat Jun 30 00:00:17 2012] 41.223700 total counts/ 10.286700 bgd. counts: snr = 9.645842
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.213433 pixels
  Position = (701.2, 959.7) = 16 35 43.40 -47 47 37.1
  Extent = 1.1 (0.7-1.3)", rotation angle = 0
  Source counts = 30.9 +/- 6.4
  Background counts = 10.3
  Rate = 0.002 +/- 0.0003
[Sat Jun 30 00:00:17 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 00:00:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 00:00:17 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 00:00:17 2012] Source does appear to be extended
[Sat Jun 30 00:00:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 00:02:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 30 00:02:06 2012] Initial guess for spatial extent in simple fitting = 1.07"
[Sat Jun 30 00:02:06 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.868
[Sat Jun 30 00:02:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.07"
[Sat Jun 30 00:12:14 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass1_src3.ximg exists
[Sat Jun 30 00:12:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12531_pi14-548_cl_pass1_src3.csv
[Sat Jun 30 00:12:14 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Jun 30 00:12:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12531_pi14-548_cl_pass1_src3.csv
[Sat Jun 30 00:12:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12531_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12531_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 00:12:14 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 30 00:12:14 2012] fullrun_ccd2_acisf12531_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 30 00:12:14 2012] Fit fullrun_ccd2_acisf12531_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 30 00:25:57 2012] Spatial fit model total counts = 31.302900, observed total counts = 36.000000
[Sat Jun 30 00:25:57 2012] Offset between fit and detection position for source 3 = 0.838658 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.838658 pixels
  Position = (702.0, 960.1) = 16 35 43.37 -47 47 36.9
  Extent = 1.5" x 0.7", rotation angle = 350
  Source counts = 29.6 +/- 5.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Sat Jun 30 00:25:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 00:25:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 00:25:57 2012] Assessing source extent using major
[Sat Jun 30 00:25:57 2012] Source does appear to be extended
[Sat Jun 30 00:25:57 2012] Computing asymmetry using major and minor axis, asym = 2.28
[Sat Jun 30 00:25:57 2012] Source is asymmetric
[Sat Jun 30 00:31:21 2012] Writing source region out to fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3_src.reg
[Sat Jun 30 00:31:21 2012] Extracting stamp from image fullrun_ccd2_acisf12531_pi14-548_cl_sm2.00.img.gz, (633, 891) - (771, 1029)
[Sat Jun 30 00:31:21 2012] Writing fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3.gif
[Sat Jun 30 00:32:47 2012] Size of ../../acisf12531/products/events/fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3_src.evt.gz[events] = 34 counts
[Sat Jun 30 00:32:47 2012] Mean chipx,y = (763.06, 672.12)
[Sat Jun 30 00:32:47 2012] Mean tdetx,y = (3733.12, 3322.94)
[Sat Jun 30 00:32:47 2012] chipx,y range = (746.00-783.00, 647.00-689.00)
[Sat Jun 30 00:32:47 2012] Size of ../../acisf12531/products/events/fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 40 counts
[Sat Jun 30 00:32:48 2012] Not generating rmf since there are only 29 counts
[Sat Jun 30 00:32:48 2012] arf not found, will run specextract
[Sat Jun 30 00:33:22 2012] ../../acisf12531/products/spectra/fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3.warf not found
[Sat Jun 30 00:33:22 2012] ../../acisf12531/products/spectra/fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3.wrmf not found
[Sat Jun 30 00:33:22 2012] Removal of ../../acisf12531/products/spectra/fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3.soff failed
[Sat Jun 30 00:39:00 2012] Spectrum 3 has only 30 counts, deleting rmf
[Sat Jun 30 00:39:00 2012] 163.115
[Sat Jun 30 00:43:56 2012] Updating aperture counts using extracted products
[Sat Jun 30 00:43:56 2012] Error reading totcts from fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Jun 30 00:43:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 30 00:43:56 2012] Using photon index=1.80, rate=0.00152, arf fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3.arf
[Sat Jun 30 00:43:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 30 00:43:56 2012] Updating source flux to 3.2e-14
[Sat Jun 30 00:44:00 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 30 00:44:01 2012] acisf12531/analysis//spectral/fullrun_ccd2_acisf12531_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete