[Wed Jun 27 17:43:08 2012] Detection parameters:
  Position = (441.8, 863.6) = 16 34 43.83 -47 35 28.1
  Extent = 0.7" x 0.5", rotation angle = 115 degrees
  Source counts = 35.5 +/- 6.0
  Background counts = 0.5
  Rate = 0.002 +/- 0.0003

[Wed Jun 27 17:43:08 2012] Off-axis axis estimate = 4.09'
[Wed Jun 27 17:50:13 2012] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 17:50:13 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Wed Jun 27 17:50:13 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.993
[Wed Jun 27 17:50:13 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 0.86"
[Wed Jun 27 18:02:24 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass0_src2.ximg exists
[Wed Jun 27 18:02:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12529_pi14-548_cl_pass0_src2.csv
[Wed Jun 27 18:02:24 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Jun 27 18:02:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12529_pi14-548_cl_pass0_src2.csv
[Wed Jun 27 18:02:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12529_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12529_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 18:02:24 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 27 18:02:24 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 27 18:02:24 2012] Fit fullrun_ccd1_acisf12529_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 27 18:15:39 2012] Spatial fit model total counts = 38.142100, observed total counts = 38.000000
[Wed Jun 27 18:15:39 2012] Offset between fit and detection position for source 4 = 0.617187 pixels
[Wed Jun 27 18:15:39 2012] 38.561090 total counts/ 6.863190 bgd. counts: snr = 12.099502
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.617187 pixels
  Position = (442.0, 864.1) = 16 34 43.84 -47 35 28.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 31.7 +/- 6.2
  Background counts = 6.9
  Rate = 0.002 +/- 0.0003
[Wed Jun 27 18:15:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 18:15:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 18:15:39 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 18:15:39 2012] Source does appear to be extended
[Wed Jun 27 18:15:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 18:19:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 18:19:37 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Jun 27 18:19:37 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.299
[Wed Jun 27 18:19:37 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 0.62"
[Wed Jun 27 18:33:05 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass1_src2.ximg exists
[Wed Jun 27 18:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12529_pi14-548_cl_pass1_src2.csv
[Wed Jun 27 18:33:05 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Jun 27 18:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12529_pi14-548_cl_pass1_src2.csv
[Wed Jun 27 18:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12529_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12529_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 18:33:05 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 27 18:33:05 2012] fullrun_ccd1_acisf12529_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 27 18:33:05 2012] Fit fullrun_ccd1_acisf12529_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jun 27 18:40:17 2012] Spatial fit model total counts = 40.373200, observed total counts = 40.000000
[Wed Jun 27 18:40:17 2012] Offset between fit and detection position for source 4 = 0.034632 pixels
[Wed Jun 27 18:40:17 2012] 40.980460 total counts/ 9.512460 bgd. counts: snr = 10.202879
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.034632 pixels
  Position = (442.0, 864.1) = 16 34 43.84 -47 35 28.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 31.5 +/- 6.4
  Background counts = 9.5
  Rate = 0.002 +/- 0.0003
[Wed Jun 27 18:40:17 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 18:40:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 18:40:17 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 18:40:17 2012] Source does appear to be extended
[Wed Jun 27 18:40:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 18:43:13 2012] Writing source region out to fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4_src.reg
[Wed Jun 27 18:43:13 2012] Extracting stamp from image fullrun_ccd1_acisf12529_pi14-548_cl_sm2.00.img.gz, (414, 836) - (470, 892)
[Wed Jun 27 18:43:13 2012] Writing fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4.gif
[Wed Jun 27 18:43:50 2012] Size of ../../acisf12529/products/events/fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4_src.evt.gz[events] = 35 counts
[Wed Jun 27 18:43:50 2012] Mean chipx,y = (248.34, 654.97)
[Wed Jun 27 18:43:50 2012] Mean tdetx,y = (4477.03, 4355.34)
[Wed Jun 27 18:43:50 2012] chipx,y range = (233.00-268.00, 640.00-674.00)
[Wed Jun 27 18:43:50 2012] Size of ../../acisf12529/products/events/fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 3 counts
[Wed Jun 27 18:43:51 2012] Not generating rmf since there are only 31 counts
[Wed Jun 27 18:43:51 2012] arf not found, will run specextract
[Wed Jun 27 18:44:19 2012] ../../acisf12529/products/spectra/fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4.warf not found
[Wed Jun 27 18:44:19 2012] ../../acisf12529/products/spectra/fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4.wrmf not found
[Wed Jun 27 18:44:19 2012] Removal of ../../acisf12529/products/spectra/fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4.soff failed
[Wed Jun 27 18:50:37 2012] Spectrum 4 has only 31 counts, deleting rmf
[Wed Jun 27 18:50:37 2012] 187.349
[Wed Jun 27 18:55:57 2012] Updating aperture counts using extracted products
[Wed Jun 27 18:55:57 2012] Error reading totcts from fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Jun 27 18:55:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 18:55:57 2012] Using photon index=1.80, rate=0.00166, arf fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4.arf
[Wed Jun 27 18:55:57 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jun 27 18:55:57 2012] Updating source flux to 3.1e-14
[Wed Jun 27 18:56:04 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 27 18:56:05 2012] acisf12529/analysis//spectral/fullrun_ccd1_acisf12529_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete