[Sun Jul  8 13:40:49 2012] Detection parameters:
  Position = (970.1, 478.9) = 16 35 21.14 -47 17 44.0
  Extent = 0.6" x 0.5", rotation angle = 74 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0002

[Sun Jul  8 13:40:49 2012] Off-axis axis estimate = 3.14'
[Sun Jul  8 13:59:11 2012] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 13:59:11 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Sun Jul  8 13:59:11 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.327
[Sun Jul  8 13:59:11 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.61"
[Sun Jul  8 14:05:58 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass0_src6.ximg exists
[Sun Jul  8 14:05:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12527_pi14-548_cl_pass0_src6.csv
[Sun Jul  8 14:05:58 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Jul  8 14:05:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12527_pi14-548_cl_pass0_src6.csv
[Sun Jul  8 14:05:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12527_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12527_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 14:05:58 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Jul  8 14:05:58 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jul  8 14:05:58 2012] Fit fullrun_ccd2_acisf12527_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jul  8 14:15:48 2012] Spatial fit model total counts = 11.183700, observed total counts = 12.000000
[Sun Jul  8 14:15:48 2012] Offset between fit and detection position for source 4 = 0.759916 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.759916 pixels
  Position = (970.6, 479.4) = 16 35 21.14 -47 17 44.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 11.4 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Jul  8 14:15:48 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 14:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 14:15:48 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 14:15:48 2012] Source does appear to be extended
[Sun Jul  8 14:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 14:32:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 14:32:05 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Sun Jul  8 14:32:05 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.675
[Sun Jul  8 14:32:05 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.65"
[Sun Jul  8 14:38:55 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass1_src6.ximg exists
[Sun Jul  8 14:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12527_pi14-548_cl_pass1_src6.csv
[Sun Jul  8 14:38:55 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Jul  8 14:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12527_pi14-548_cl_pass1_src6.csv
[Sun Jul  8 14:38:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12527_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12527_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 14:38:55 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Jul  8 14:38:55 2012] fullrun_ccd2_acisf12527_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jul  8 14:38:55 2012] Fit fullrun_ccd2_acisf12527_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jul  8 14:49:19 2012] Spatial fit model total counts = 11.408700, observed total counts = 12.000000
[Sun Jul  8 14:49:19 2012] Offset between fit and detection position for source 4 = 0.044888 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.044888 pixels
  Position = (970.6, 479.4) = 16 35 21.14 -47 17 44.0
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Jul  8 14:49:19 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 14:49:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 14:49:19 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 14:49:19 2012] Source does appear to be extended
[Sun Jul  8 14:49:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 15:01:52 2012] Writing source region out to fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4_src.reg
[Sun Jul  8 15:01:52 2012] Extracting stamp from image fullrun_ccd2_acisf12527_pi14-548_cl_sm2.00.img.gz, (941, 450) - (1000, 509)
[Sun Jul  8 15:01:52 2012] Writing fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4.gif
[Sun Jul  8 15:05:18 2012] Size of ../../acisf12527/products/events/fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4_src.evt.gz[events] = 11 counts
[Sun Jul  8 15:05:18 2012] Mean chipx,y = (200.09, 681.27)
[Sun Jul  8 15:05:18 2012] Mean tdetx,y = (3742.27, 3885.91)
[Sun Jul  8 15:05:18 2012] chipx,y range = (188.00-210.00, 670.00-693.00)
[Sun Jul  8 15:05:18 2012] Size of ../../acisf12527/products/events/fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 7 counts
[Sun Jul  8 15:05:19 2012] Not generating rmf since there are only 11 counts
[Sun Jul  8 15:05:19 2012] arf not found, will run specextract
[Sun Jul  8 15:05:51 2012] ../../acisf12527/products/spectra/fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4.warf not found
[Sun Jul  8 15:05:51 2012] ../../acisf12527/products/spectra/fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4.wrmf not found
[Sun Jul  8 15:05:51 2012] Removal of ../../acisf12527/products/spectra/fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4.soff failed
[Sun Jul  8 15:10:06 2012] Spectrum 4 has only 12 counts, deleting rmf
[Sun Jul  8 15:10:06 2012] 177.525
[Sun Jul  8 15:17:12 2012] Updating aperture counts using extracted products
[Sun Jul  8 15:17:12 2012] Error reading totcts from fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Jul  8 15:17:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 15:17:12 2012] Using photon index=1.80, rate=0.000597, arf fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4.arf
[Sun Jul  8 15:17:12 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jul  8 15:17:12 2012] Updating source flux to 1.2e-14
[Sun Jul  8 15:17:16 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jul  8 15:17:17 2012] acisf12527/analysis//spectral/fullrun_ccd2_acisf12527_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete