[Sun Jul  8 13:40:17 2012] Detection parameters:
  Position = (450.2, 1039.7) = 16 34 38.53 -47 17 1.3
  Extent = 0.7" x 0.5", rotation angle = 138 degrees
  Source counts = 21.6 +/- 4.7
  Background counts = 0.4
  Rate = 0.001 +/- 0.0002

[Sun Jul  8 13:40:17 2012] Off-axis axis estimate = 4.12'
[Sun Jul  8 13:51:23 2012] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 13:51:23 2012] Initial guess for spatial extent in simple fitting = 0.87"
[Sun Jul  8 13:51:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Sun Jul  8 13:51:23 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.87"
[Sun Jul  8 13:59:10 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass0_src4.ximg exists
[Sun Jul  8 13:59:10 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass0_src4_1.ximg exists
[Sun Jul  8 13:59:10 2012] Fit fullrun_ccd1_acisf12527_pi14-548_cl_pass0_src4 appears to have run properly
[Sun Jul  8 13:59:10 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun Jul  8 13:59:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12527_pi14-548_cl_pass0_tfrozen_src4.csv
[Sun Jul  8 13:59:10 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jul  8 13:59:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12527_pi14-548_cl_pass0_tfrozen_src4.csv
[Sun Jul  8 13:59:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12527_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12527_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 14:15:47 2012] Spatial fit model total counts = 19.608800, observed total counts = 23.000000
[Sun Jul  8 14:15:47 2012] Offset between fit and detection position for source 2 = 0.817392 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.817392 pixels
  Position = (450.3, 1040.5) = 16 34 38.55 -47 17 1.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 19.7 +/- 4.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sun Jul  8 14:15:47 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 14:15:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 14:15:47 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 14:15:47 2012] Source does appear to be extended
[Sun Jul  8 14:15:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 14:24:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 14:24:02 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Sun Jul  8 14:24:02 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.802
[Sun Jul  8 14:24:02 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.58"
[Sun Jul  8 14:32:05 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass1_src4.ximg exists
[Sun Jul  8 14:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12527_pi14-548_cl_pass1_src4.csv
[Sun Jul  8 14:32:05 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Jul  8 14:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12527_pi14-548_cl_pass1_src4.csv
[Sun Jul  8 14:32:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12527_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12527_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 14:32:05 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Jul  8 14:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12527_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun Jul  8 14:32:05 2012] fullrun_ccd1_acisf12527_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jul  8 14:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12527_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun Jul  8 14:32:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12527_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12527_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 14:49:18 2012] Spatial fit model total counts = 20.468500, observed total counts = 23.000000
[Sun Jul  8 14:49:18 2012] Offset between fit and detection position for source 2 = 0.061045 pixels
[Sun Jul  8 14:49:18 2012] 20.553209 total counts/ 0.047909 bgd. counts: snr = 93.682306
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.061045 pixels
  Position = (450.3, 1040.5) = 16 34 38.55 -47 17 1.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 20.5 +/- 4.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sun Jul  8 14:49:18 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 14:49:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 14:49:18 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 14:49:18 2012] Source does appear to be extended
[Sun Jul  8 14:49:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 14:54:20 2012] Writing source region out to fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2_src.reg
[Sun Jul  8 14:54:20 2012] Extracting stamp from image fullrun_ccd1_acisf12527_pi14-548_cl_sm2.00.img.gz, (424, 1014) - (477, 1067)
[Sun Jul  8 14:54:20 2012] Writing fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2.gif
[Sun Jul  8 14:55:57 2012] Size of ../../acisf12527/products/events/fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2_src.evt.gz[events] = 21 counts
[Sun Jul  8 14:55:57 2012] Mean chipx,y = (95.81, 555.33)
[Sun Jul  8 14:55:57 2012] Mean tdetx,y = (4576.67, 4202.81)
[Sun Jul  8 14:55:57 2012] chipx,y range = (78.00-114.00, 540.00-574.00)
[Sun Jul  8 14:55:57 2012] Size of ../../acisf12527/products/events/fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 2 counts
[Sun Jul  8 14:55:59 2012] Not generating rmf since there are only 20 counts
[Sun Jul  8 14:55:59 2012] arf not found, will run specextract
[Sun Jul  8 14:56:21 2012] ../../acisf12527/products/spectra/fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2.warf not found
[Sun Jul  8 14:56:21 2012] ../../acisf12527/products/spectra/fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2.wrmf not found
[Sun Jul  8 14:56:21 2012] Removal of ../../acisf12527/products/spectra/fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2.soff failed
[Sun Jul  8 15:01:52 2012] Spectrum 2 has only 21 counts, deleting rmf
[Sun Jul  8 15:01:52 2012] 184.334
[Sun Jul  8 15:17:11 2012] Updating aperture counts using extracted products
[Sun Jul  8 15:17:11 2012] Error reading totcts from fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Jul  8 15:17:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 15:17:11 2012] Using photon index=1.80, rate=0.00106, arf fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2.arf
[Sun Jul  8 15:17:11 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jul  8 15:17:11 2012] Updating source flux to 2e-14
[Sun Jul  8 15:17:15 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jul  8 15:17:16 2012] acisf12527/analysis//spectral/fullrun_ccd1_acisf12527_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete