[Tue Jun 19 10:32:09 2012] Detection parameters:
  Position = (526.9, 353.8) = 16 35 51.26 -47 23 0.4
  Extent = 0.5" x 0.5", rotation angle = 84 degrees
  Source counts = 15.5 +/- 4.0
  Background counts = 0.5
  Rate = 0.0008 +/- 0.0002

[Tue Jun 19 10:32:09 2012] Off-axis axis estimate = 2.54'
[Tue Jun 19 10:52:48 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 10:52:48 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Tue Jun 19 10:52:48 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.983
[Tue Jun 19 10:52:48 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.50"
[Tue Jun 19 11:00:31 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass0_src5.ximg exists
[Tue Jun 19 11:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12526_pi14-548_cl_pass0_src5.csv
[Tue Jun 19 11:00:31 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Jun 19 11:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12526_pi14-548_cl_pass0_src5.csv
[Tue Jun 19 11:00:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12526_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12526_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 11:00:31 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 19 11:00:31 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 19 11:00:31 2012] Fit fullrun_ccd3_acisf12526_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jun 19 11:00:37 2012] Spatial fit model total counts = 15.052500, observed total counts = 16.000000
[Tue Jun 19 11:00:37 2012] Offset between fit and detection position for source 10 = 0.712023 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.712023 pixels
  Position = (527.4, 354.3) = 16 35 51.26 -47 23 0.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 15.1 +/- 3.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Jun 19 11:00:37 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 11:00:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 11:00:37 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 11:00:37 2012] Source does appear to be extended
[Tue Jun 19 11:00:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 11:21:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 11:21:36 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Tue Jun 19 11:21:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.762
[Tue Jun 19 11:21:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.60"
[Tue Jun 19 11:30:39 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass1_src5.ximg exists
[Tue Jun 19 11:30:39 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Jun 19 11:30:39 2012] Fit fullrun_ccd3_acisf12526_pi14-548_cl_pass1_src5 appears to have run properly
[Tue Jun 19 11:30:39 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 19 11:30:39 2012] fullrun_ccd3_acisf12526_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 19 11:30:39 2012] Fit fullrun_ccd3_acisf12526_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jun 19 11:30:44 2012] Spatial fit model total counts = 15.960300, observed total counts = 16.000000
[Tue Jun 19 11:30:44 2012] Offset between fit and detection position for source 10 = 0.077301 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.077301 pixels
  Position = (527.3, 354.3) = 16 35 51.27 -47 23 0.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Jun 19 11:30:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 11:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 11:30:44 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 11:30:44 2012] Source does appear to be extended
[Tue Jun 19 11:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 11:40:32 2012] Writing source region out to fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10_src.reg
[Tue Jun 19 11:40:32 2012] Extracting stamp from image fullrun_ccd3_acisf12526_pi14-548_cl_sm2.00.img.gz, (499, 326) - (556, 383)
[Tue Jun 19 11:40:32 2012] Writing fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10.gif
[Tue Jun 19 11:42:40 2012] Size of ../../acisf12526/products/events/fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10_src.evt.gz[events] = 16 counts
[Tue Jun 19 11:42:40 2012] Mean chipx,y = (723.75, 806.25)
[Tue Jun 19 11:42:40 2012] Mean tdetx,y = (4325.75, 3784.75)
[Tue Jun 19 11:42:40 2012] chipx,y range = (709.00-742.00, 791.00-825.00)
[Tue Jun 19 11:42:40 2012] Size of ../../acisf12526/products/events/fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 11 counts
[Tue Jun 19 11:42:41 2012] Not generating rmf since there are only 15 counts
[Tue Jun 19 11:42:41 2012] arf not found, will run specextract
[Tue Jun 19 11:43:08 2012] ../../acisf12526/products/spectra/fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10.warf not found
[Tue Jun 19 11:43:08 2012] ../../acisf12526/products/spectra/fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10.wrmf not found
[Tue Jun 19 11:43:08 2012] Removal of ../../acisf12526/products/spectra/fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10.soff failed
[Tue Jun 19 11:44:44 2012] Spectrum 10 has only 16 counts, deleting rmf
[Tue Jun 19 11:44:44 2012] 195.935
[Tue Jun 19 11:44:47 2012] Updating aperture counts using extracted products
[Tue Jun 19 11:44:47 2012] Error reading totcts from fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Jun 19 11:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 11:44:47 2012] Using photon index=1.80, rate=0.00084, arf fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10.arf
[Tue Jun 19 11:44:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 19 11:44:47 2012] Updating source flux to 1.5e-14
[Tue Jun 19 11:44:52 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 19 11:44:53 2012] acisf12526/analysis//spectral/fullrun_ccd3_acisf12526_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete