[Tue Jun 19 10:31:02 2012] Detection parameters:
  Position = (772.6, 1284.4) = 16 35 15.33 -47 23 3.6
  Extent = 1.0" x 0.8", rotation angle = 24 degrees
  Source counts = 13.7 +/- 3.9
  Background counts = 1.3
  Rate = 0.0007 +/- 0.0002

[Tue Jun 19 10:31:02 2012] Off-axis axis estimate = 7.14'
[Tue Jun 19 10:41:54 2012] Using EEF radius (= 2.26 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 10:41:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 10:41:54 2012] Initial guess for spatial extent in simple fitting = 2.26"
[Tue Jun 19 10:41:54 2012] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.962
[Tue Jun 19 10:41:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.26"
[Tue Jun 19 10:50:24 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass0_src1.ximg exists
[Tue Jun 19 10:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12526_pi14-548_cl_pass0_src1.csv
[Tue Jun 19 10:50:24 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jun 19 10:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12526_pi14-548_cl_pass0_src1.csv
[Tue Jun 19 10:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12526_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12526_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 10:50:24 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 10:50:24 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 10:50:25 2012] Fit fullrun_ccd1_acisf12526_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 11:00:35 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 25.712523 pixels away
[Tue Jun 19 11:00:35 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 11:00:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 11:00:35 2012] Assessing source extent using major
[Tue Jun 19 11:00:35 2012] Source does appear to be extended
[Tue Jun 19 11:00:35 2012] Computing asymmetry using major and minor axis, asym = 1.18
[Tue Jun 19 11:08:49 2012] Using EEF radius (= 2.26 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 11:08:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 11:08:49 2012] Initial guess for spatial extent in simple fitting = 2.26"
[Tue Jun 19 11:08:49 2012] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.962
[Tue Jun 19 11:08:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.26"
[Tue Jun 19 11:18:16 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass1_src1.ximg exists
[Tue Jun 19 11:18:16 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jun 19 11:18:16 2012] Fit fullrun_ccd1_acisf12526_pi14-548_cl_pass1_src1 appears to have run properly
[Tue Jun 19 11:18:16 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 11:18:16 2012] fullrun_ccd1_acisf12526_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 11:18:16 2012] Fit fullrun_ccd1_acisf12526_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 11:30:43 2012] Spatial fit model total counts = 23.370800, observed total counts = 25.000000
[Tue Jun 19 11:30:43 2012] Offset between fit and detection position for source 3 = 2.195261 pixels
[Tue Jun 19 11:30:43 2012] 23.867200 total counts/ 13.040100 bgd. counts: snr = 2.998277
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.195261 pixels
  Position = (774.8, 1284.3) = 16 35 15.25 -47 23 3.8
  Extent = 1.5" x 1.5", rotation angle = 0
  Source counts = 10.8 +/- 4.9
  Background counts = 13.0
  Rate = 0.0006 +/- 0.0003
[Tue Jun 19 11:30:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 11:30:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 11:30:43 2012] Assessing source extent using major
[Tue Jun 19 11:30:43 2012] Source does appear to be extended
[Tue Jun 19 11:30:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 11:33:47 2012] Writing source region out to fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3_src.reg
[Tue Jun 19 11:33:47 2012] Extracting stamp from image fullrun_ccd1_acisf12526_pi14-548_cl_sm2.00.img.gz, (708, 1217) - (842, 1351)
[Tue Jun 19 11:33:47 2012] Writing fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3.gif
[Tue Jun 19 11:33:48 2012] Size of ../../acisf12526/products/events/fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3_src.evt.gz[events] = 24 counts
[Tue Jun 19 11:33:48 2012] Mean chipx,y = (27.04, 151.42)
[Tue Jun 19 11:33:48 2012] Mean tdetx,y = (4980.58, 4134.04)
[Tue Jun 19 11:33:48 2012] chipx,y range = (2.00-45.00, 131.00-169.00)
[Tue Jun 19 11:33:48 2012] Size of ../../acisf12526/products/events/fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 19 counts
[Tue Jun 19 11:33:49 2012] Not generating rmf since there are only 10 counts
[Tue Jun 19 11:33:49 2012] arf not found, will run specextract
[Tue Jun 19 11:34:07 2012] ../../acisf12526/products/spectra/fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3.warf not found
[Tue Jun 19 11:34:07 2012] ../../acisf12526/products/spectra/fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3.wrmf not found
[Tue Jun 19 11:34:07 2012] Removal of ../../acisf12526/products/spectra/fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3.soff failed
[Tue Jun 19 11:36:56 2012] Spectrum 3 has only 11 counts, deleting rmf
[Tue Jun 19 11:36:56 2012] 178.224
[Tue Jun 19 11:44:47 2012] Updating aperture counts using extracted products
[Tue Jun 19 11:44:47 2012] Error reading totcts from fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Jun 19 11:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 11:44:47 2012] Using photon index=1.80, rate=0.000569, arf fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3.arf
[Tue Jun 19 11:44:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 19 11:44:47 2012] Updating source flux to 1.1e-14
[Tue Jun 19 11:44:50 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 19 11:44:51 2012] acisf12526/analysis//spectral/fullrun_ccd1_acisf12526_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete