[Sun Jul  8 00:17:27 2012] Detection parameters:
  Position = (897.9, 322.3) = 16 36 25.94 -47 31 24.2
  Extent = 0.8" x 0.5", rotation angle = 163 degrees
  Source counts = 15.5 +/- 4.0
  Background counts = 0.5
  Rate = 0.0008 +/- 0.0002

[Sun Jul  8 00:17:27 2012] Off-axis axis estimate = 4.23'
[Sun Jul  8 00:53:33 2012] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 00:53:33 2012] Initial guess for spatial extent in simple fitting = 0.90"
[Sun Jul  8 00:53:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.917
[Sun Jul  8 00:53:33 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.90"
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src5.ximg exists
[Sun Jul  8 01:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src5.csv
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Jul  8 01:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src5.csv
[Sun Jul  8 01:03:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jul  8 01:03:14 2012] Fit fullrun_ccd3_acisf12525_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jul  8 01:11:41 2012] Spatial fit model total counts = 15.624900, observed total counts = 16.000000
[Sun Jul  8 01:11:41 2012] Offset between fit and detection position for source 3 = 0.759180 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.759180 pixels
  Position = (898.4, 322.9) = 16 36 25.94 -47 31 24.2
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 15.6 +/- 4.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sun Jul  8 01:11:41 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:11:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:11:41 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 01:11:41 2012] Source does appear to be extended
[Sun Jul  8 01:11:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 01:39:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 01:39:54 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Sun Jul  8 01:39:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.024
[Sun Jul  8 01:39:54 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.84"
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src5.ximg exists
[Sun Jul  8 01:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src5.csv
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src5_1.ximg exists
[Sun Jul  8 01:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src5.csv
[Sun Jul  8 01:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jul  8 01:49:52 2012] Fit fullrun_ccd3_acisf12525_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jul  8 02:00:50 2012] Spatial fit model total counts = 14.208300, observed total counts = 16.000000
[Sun Jul  8 02:00:50 2012] Offset between fit and detection position for source 3 = 0.334895 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.334895 pixels
  Position = (898.1, 323.0) = 16 36 25.95 -47 31 24.1
  Extent = 0.9 (0.7-1.5)" x 0.5 (0.3-0.7)", rotation angle = 0 (343-0) degrees
  Source counts = 14.3 +/- 3.8
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Sun Jul  8 02:00:50 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 02:00:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 02:00:50 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 02:00:50 2012] Source does appear to be extended
[Sun Jul  8 02:00:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Sun Jul  8 02:13:30 2012] Writing source region out to fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3_src.reg
[Sun Jul  8 02:13:30 2012] Extracting stamp from image fullrun_ccd3_acisf12525_pi14-548_cl_sm2.00.img.gz, (858, 283) - (938, 363)
[Sun Jul  8 02:13:30 2012] Writing fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3.gif
[Sun Jul  8 02:15:45 2012] Size of ../../acisf12525/products/events/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3_src.evt.gz[events] = 16 counts
[Sun Jul  8 02:15:45 2012] Mean chipx,y = (929.94, 495.19)
[Sun Jul  8 02:15:45 2012] Mean tdetx,y = (4636.81, 3990.94)
[Sun Jul  8 02:15:45 2012] chipx,y range = (910.00-944.00, 478.00-517.00)
[Sun Jul  8 02:15:45 2012] Size of ../../acisf12525/products/events/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Sun Jul  8 02:15:46 2012] Not generating rmf since there are only 14 counts
[Sun Jul  8 02:15:46 2012] arf not found, will run specextract
[Sun Jul  8 02:16:09 2012] ../../acisf12525/products/spectra/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3.warf not found
[Sun Jul  8 02:16:09 2012] ../../acisf12525/products/spectra/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3.wrmf not found
[Sun Jul  8 02:16:09 2012] Removal of ../../acisf12525/products/spectra/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3.soff failed
[Sun Jul  8 02:20:17 2012] Spectrum 3 has only 14 counts, deleting rmf
[Sun Jul  8 02:20:17 2012] 192.413
[Sun Jul  8 02:21:13 2012] Updating aperture counts using extracted products
[Sun Jul  8 02:21:13 2012] Error reading totcts from fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Jul  8 02:21:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 02:21:14 2012] Using photon index=1.80, rate=0.000734, arf fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3.arf
[Sun Jul  8 02:21:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jul  8 02:21:14 2012] Updating source flux to 1.3e-14
[Sun Jul  8 02:21:21 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jul  8 02:21:22 2012] acisf12525/analysis//spectral/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete