[Sun Jul  8 00:17:27 2012] Detection parameters:
  Position = (609.5, 220.9) = 16 36 39.95 -47 32 14.2
  Extent = 0.6" x 0.5", rotation angle = 85 degrees
  Source counts = 12.6 +/- 3.6
  Background counts = 0.4
  Rate = 0.0006 +/- 0.0002

[Sun Jul  8 00:17:27 2012] Off-axis axis estimate = 1.83'
[Sun Jul  8 00:53:33 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 00:53:33 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Sun Jul  8 00:53:33 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.831
[Sun Jul  8 00:53:33 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.41"
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src7.ximg exists
[Sun Jul  8 01:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src7.csv
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Jul  8 01:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src7.csv
[Sun Jul  8 01:03:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12525_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Jul  8 01:03:14 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jul  8 01:03:14 2012] Fit fullrun_ccd3_acisf12525_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Jul  8 01:11:41 2012] Spatial fit model total counts = 12.562500, observed total counts = 14.000000
[Sun Jul  8 01:11:41 2012] Offset between fit and detection position for source 2 = 0.743438 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.743438 pixels
  Position = (610.0, 221.5) = 16 36 39.95 -47 32 14.2
  Extent = 0.8 (0.5-1.1)" x 0.4 (0.3-0.6)", rotation angle = 93 (69-121) degrees
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Jul  8 01:11:41 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 01:11:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 01:11:41 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 01:11:41 2012] Source does appear to be extended
[Sun Jul  8 01:11:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Sun Jul  8 01:39:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 01:39:54 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Sun Jul  8 01:39:54 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.070
[Sun Jul  8 01:39:54 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.58"
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src7.ximg exists
[Sun Jul  8 01:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src7.csv
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Jul  8 01:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src7.csv
[Sun Jul  8 01:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12525_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Jul  8 01:49:52 2012] fullrun_ccd3_acisf12525_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jul  8 01:49:52 2012] Fit fullrun_ccd3_acisf12525_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Jul  8 02:00:50 2012] Spatial fit model total counts = 12.375700, observed total counts = 14.000000
[Sun Jul  8 02:00:50 2012] Offset between fit and detection position for source 2 = 0.291086 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.291086 pixels
  Position = (610.0, 221.2) = 16 36 39.95 -47 32 14.3
  Extent = 0.8" x 0.4", rotation angle = 91
  Source counts = 11.9 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sun Jul  8 02:00:50 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 02:00:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 02:00:50 2012] Assessing source extent using major
[Sun Jul  8 02:00:50 2012] Source does appear to be extended
[Sun Jul  8 02:00:50 2012] Computing asymmetry using major and minor axis, asym = 2.00
[Sun Jul  8 02:00:50 2012] Source is asymmetric
[Sun Jul  8 02:13:30 2012] Writing source region out to fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2_src.reg
[Sun Jul  8 02:13:30 2012] Extracting stamp from image fullrun_ccd3_acisf12525_pi14-548_cl_sm2.00.img.gz, (574, 185) - (646, 257)
[Sun Jul  8 02:13:30 2012] Writing fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2.gif
[Sun Jul  8 02:16:52 2012] Size of ../../acisf12525/products/events/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2_src.evt.gz[events] = 13 counts
[Sun Jul  8 02:16:52 2012] Mean chipx,y = (881.15, 798.00)
[Sun Jul  8 02:16:52 2012] Mean tdetx,y = (4334.00, 3942.15)
[Sun Jul  8 02:16:52 2012] chipx,y range = (870.00-901.00, 785.00-819.00)
[Sun Jul  8 02:16:52 2012] Size of ../../acisf12525/products/events/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 16 counts
[Sun Jul  8 02:16:53 2012] Not generating rmf since there are only 11 counts
[Sun Jul  8 02:16:53 2012] arf not found, will run specextract
[Sun Jul  8 02:17:19 2012] ../../acisf12525/products/spectra/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2.warf not found
[Sun Jul  8 02:17:19 2012] ../../acisf12525/products/spectra/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2.wrmf not found
[Sun Jul  8 02:17:19 2012] Removal of ../../acisf12525/products/spectra/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2.soff failed
[Sun Jul  8 02:20:17 2012] Spectrum 2 has only 12 counts, deleting rmf
[Sun Jul  8 02:20:17 2012] 200.685
[Sun Jul  8 02:21:13 2012] Updating aperture counts using extracted products
[Sun Jul  8 02:21:13 2012] Error reading totcts from fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Jul  8 02:21:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 02:21:14 2012] Using photon index=1.80, rate=0.00061, arf fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2.arf
[Sun Jul  8 02:21:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jul  8 02:21:14 2012] Updating source flux to 1.1e-14
[Sun Jul  8 02:21:21 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jul  8 02:21:22 2012] acisf12525/analysis//spectral/fullrun_ccd3_acisf12525_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete