[Sun Jun 24 23:46:28 2012] Detection parameters:
  Position = (358.6, 654.8) = 16 35 53.89 -47 3 38.6
  Extent = 0.8" x 0.6", rotation angle = 10 degrees
  Source counts = 64.8 +/- 8.1
  Background counts = 1.2
  Rate = 0.003 +/- 0.0004

[Sun Jun 24 23:46:28 2012] Off-axis axis estimate = 4.90'
[Sun Jun 24 23:59:22 2012] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 23:59:22 2012] Initial guess for spatial extent in simple fitting = 1.14"
[Sun Jun 24 23:59:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Sun Jun 24 23:59:22 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 1.14"
[Mon Jun 25 00:14:21 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass0_src3.ximg exists
[Mon Jun 25 00:14:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12524_pi14-548_cl_pass0_src3.csv
[Mon Jun 25 00:14:21 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Jun 25 00:14:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12524_pi14-548_cl_pass0_src3.csv
[Mon Jun 25 00:14:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12524_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12524_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 00:14:21 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 25 00:14:21 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 25 00:14:21 2012] Fit fullrun_ccd3_acisf12524_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun 25 00:14:26 2012] Spatial fit model total counts = 67.998800, observed total counts = 68.000000
[Mon Jun 25 00:14:26 2012] Offset between fit and detection position for source 2 = 0.597956 pixels
[Mon Jun 25 00:14:26 2012] 67.932640 total counts/ 5.865940 bgd. counts: snr = 25.626533
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.597956 pixels
  Position = (359.0, 655.3) = 16 35 53.90 -47 3 38.6
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 62.1 +/- 8.2
  Background counts = 5.9
  Rate = 0.003 +/- 0.0004
[Mon Jun 25 00:14:26 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 00:14:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 00:14:26 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 00:14:26 2012] Source does appear to be extended
[Mon Jun 25 00:14:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 00:25:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 25 00:25:21 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Mon Jun 25 00:25:21 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.994
[Mon Jun 25 00:25:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.86"
[Mon Jun 25 00:37:24 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass1_src3.ximg exists
[Mon Jun 25 00:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12524_pi14-548_cl_pass1_src3.csv
[Mon Jun 25 00:37:24 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Jun 25 00:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12524_pi14-548_cl_pass1_src3.csv
[Mon Jun 25 00:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12524_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12524_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 00:37:24 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 25 00:37:24 2012] fullrun_ccd3_acisf12524_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 25 00:37:24 2012] Fit fullrun_ccd3_acisf12524_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 25 00:37:29 2012] Spatial fit model total counts = 66.165000, observed total counts = 67.000000
[Mon Jun 25 00:37:29 2012] Offset between fit and detection position for source 2 = 0.030381 pixels
[Mon Jun 25 00:37:29 2012] 66.113770 total counts/ 3.477170 bgd. counts: snr = 33.590403
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.030381 pixels
  Position = (359.0, 655.3) = 16 35 53.90 -47 3 38.6
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 62.6 +/- 8.1
  Background counts = 3.5
  Rate = 0.003 +/- 0.0004
[Mon Jun 25 00:37:29 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 00:37:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 00:37:29 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 00:37:29 2012] Source does appear to be extended
[Mon Jun 25 00:37:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 00:49:26 2012] Writing source region out to fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2_src.reg
[Mon Jun 25 00:49:26 2012] Extracting stamp from image fullrun_ccd3_acisf12524_pi14-548_cl_sm2.00.img.gz, (320, 616) - (398, 695)
[Mon Jun 25 00:49:26 2012] Writing fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2.gif
[Mon Jun 25 00:50:36 2012] Size of ../../acisf12524/products/events/fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2_src.evt.gz[events] = 66 counts
[Mon Jun 25 00:50:36 2012] Mean chipx,y = (394.58, 808.94)
[Mon Jun 25 00:50:36 2012] Mean tdetx,y = (4323.06, 3455.58)
[Mon Jun 25 00:50:36 2012] chipx,y range = (376.00-413.00, 793.00-829.00)
[Mon Jun 25 00:50:36 2012] Size of ../../acisf12524/products/events/fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 13 counts
[Mon Jun 25 00:50:38 2012] Not generating rmf since there are only 62 counts
[Mon Jun 25 00:50:38 2012] arf not found, will run specextract
[Mon Jun 25 00:51:06 2012] ../../acisf12524/products/spectra/fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2.warf not found
[Mon Jun 25 00:51:06 2012] ../../acisf12524/products/spectra/fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2.wrmf not found
[Mon Jun 25 00:51:06 2012] Removal of ../../acisf12524/products/spectra/fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2.soff failed
[Mon Jun 25 01:00:51 2012] Spectrum 2 has only 63 counts, deleting rmf
[Mon Jun 25 01:00:51 2012] 181.528
[Mon Jun 25 01:00:55 2012] Updating aperture counts using extracted products
[Mon Jun 25 01:00:55 2012] Error reading totcts from fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Jun 25 01:00:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 01:00:55 2012] Using photon index=1.80, rate=0.00321, arf fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2.arf
[Mon Jun 25 01:00:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun 25 01:00:55 2012] Updating source flux to 6.1e-14
[Mon Jun 25 01:01:00 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 25 01:01:01 2012] acisf12524/analysis//spectral/fullrun_ccd3_acisf12524_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete