[Thu Jul 12 15:55:01 2012] Detection parameters:
  Position = (888.9, 693.4) = 16 36 21.09 -47 11 14.6
  Extent = 0.8" x 0.6", rotation angle = 123 degrees
  Source counts = 29.9 +/- 5.7
  Background counts = 3.1
  Rate = 0.002 +/- 0.0003

[Thu Jul 12 15:55:01 2012] Off-axis axis estimate = 6.48'
[Thu Jul 12 16:10:49 2012] Using EEF radius (= 1.88 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 16:10:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 16:10:49 2012] Initial guess for spatial extent in simple fitting = 1.88"
[Thu Jul 12 16:10:49 2012] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.962
[Thu Jul 12 16:10:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.88"
[Thu Jul 12 16:14:17 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass0_src1.ximg exists
[Thu Jul 12 16:14:17 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jul 12 16:14:17 2012] Fit fullrun_ccd3_acisf12523_pi14-548_cl_pass0_src1 appears to have run properly
[Thu Jul 12 16:14:17 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 12 16:14:17 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 12 16:14:17 2012] Fit fullrun_ccd3_acisf12523_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 12 16:14:21 2012] Spatial fit model total counts = 34.566200, observed total counts = 35.000000
[Thu Jul 12 16:14:21 2012] Offset between fit and detection position for source 1 = 2.950610 pixels
[Thu Jul 12 16:14:21 2012] 34.923270 total counts/ 6.206870 bgd. counts: snr = 11.526400
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.950610 pixels
  Position = (886.8, 695.5) = 16 36 21.22 -47 11 13.9
  Extent = 2.4 (1.8-3.2)" x 0.9 (0.6-1.2)", rotation angle = 27 (15-38) degrees
  Source counts = 28.7 +/- 5.9
  Background counts = 6.2
  Rate = 0.002 +/- 0.0003
[Thu Jul 12 16:14:21 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 16:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 16:14:21 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 16:14:21 2012] Source does appear to be extended
[Thu Jul 12 16:14:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Thu Jul 12 16:14:21 2012] Source is asymmetric
[Thu Jul 12 16:29:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 16:29:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 16:29:06 2012] Initial guess for spatial extent in simple fitting = 1.61"
[Thu Jul 12 16:29:06 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.985
[Thu Jul 12 16:29:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.61"
[Thu Jul 12 16:32:36 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass1_src1.ximg exists
[Thu Jul 12 16:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12523_pi14-548_cl_pass1_src1.csv
[Thu Jul 12 16:32:36 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jul 12 16:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12523_pi14-548_cl_pass1_src1.csv
[Thu Jul 12 16:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12523_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12523_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 16:32:36 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 12 16:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12523_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu Jul 12 16:32:36 2012] fullrun_ccd3_acisf12523_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 12 16:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12523_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu Jul 12 16:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12523_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12523_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 16:32:40 2012] Spatial fit model total counts = 28.729300, observed total counts = 32.000000
[Thu Jul 12 16:32:40 2012] Offset between fit and detection position for source 1 = 0.289013 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.289013 pixels
  Position = (887.0, 695.3) = 16 36 21.21 -47 11 13.9
  Extent = 2.4 (1.9-3.2)" x 0.9 (0.6-1.2)", rotation angle = 25 (16-37) degrees
  Source counts = 29.4 +/- 5.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Thu Jul 12 16:32:40 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 16:32:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 16:32:40 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 16:32:40 2012] Source does appear to be extended
[Thu Jul 12 16:32:40 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.58
[Thu Jul 12 16:32:40 2012] Source is asymmetric
[Thu Jul 12 16:41:56 2012] Writing source region out to fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1_src.reg
[Thu Jul 12 16:41:56 2012] Extracting stamp from image fullrun_ccd3_acisf12523_pi14-548_cl_sm2.00.img.gz, (777, 586) - (997, 805)
[Thu Jul 12 16:41:56 2012] Writing fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1.gif
[Thu Jul 12 16:41:57 2012] Size of ../../acisf12523/products/events/fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1_src.evt.gz[events] = 31 counts
[Thu Jul 12 16:41:57 2012] Mean chipx,y = (573.97, 322.00)
[Thu Jul 12 16:41:57 2012] Mean tdetx,y = (4810.00, 3634.97)
[Thu Jul 12 16:41:57 2012] chipx,y range = (554.00-596.00, 302.00-337.00)
[Thu Jul 12 16:41:57 2012] Size of ../../acisf12523/products/events/fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 78 counts
[Thu Jul 12 16:41:58 2012] Not generating rmf since there are only 29 counts
[Thu Jul 12 16:41:58 2012] arf not found, will run specextract
[Thu Jul 12 16:42:25 2012] ../../acisf12523/products/spectra/fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1.warf not found
[Thu Jul 12 16:42:25 2012] ../../acisf12523/products/spectra/fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1.wrmf not found
[Thu Jul 12 16:42:25 2012] Removal of ../../acisf12523/products/spectra/fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1.soff failed
[Thu Jul 12 16:44:02 2012] Spectrum 1 has only 29 counts, deleting rmf
[Thu Jul 12 16:44:02 2012] 178.275
[Thu Jul 12 16:44:04 2012] Updating aperture counts using extracted products
[Thu Jul 12 16:44:04 2012] Error reading totcts from fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Jul 12 16:44:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 16:44:04 2012] Using photon index=1.80, rate=0.00154, arf fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1.arf
[Thu Jul 12 16:44:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 12 16:44:04 2012] Updating source flux to 3e-14
[Thu Jul 12 16:44:09 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul 12 16:44:10 2012] acisf12523/analysis//spectral/fullrun_ccd3_acisf12523_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete