[Tue Jun 26 06:36:50 2012] Detection parameters:
  Position = (1086.8, 822.4) = 16 37 48.33 -47 22 19.9
  Extent = 0.6" x 0.5", rotation angle = 18 degrees
  Source counts = 171.0 +/- 13.1
  Background counts = 1.0
  Rate = 0.009 +/- 0.0007

[Tue Jun 26 06:36:50 2012] Off-axis axis estimate = 3.20'
[Tue Jun 26 06:56:54 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 06:56:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 26 06:56:54 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Jun 26 06:56:54 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.964
[Tue Jun 26 06:56:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62"
[Tue Jun 26 07:04:58 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass0_src1.ximg exists
[Tue Jun 26 07:04:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12522_pi14-548_cl_pass0_src1.csv
[Tue Jun 26 07:04:58 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jun 26 07:04:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12522_pi14-548_cl_pass0_src1.csv
[Tue Jun 26 07:04:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12522_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12522_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 07:04:58 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 26 07:04:58 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 26 07:04:58 2012] Fit fullrun_ccd2_acisf12522_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 26 07:16:42 2012] Spatial fit model total counts = 171.397000, observed total counts = 173.000000
[Tue Jun 26 07:16:42 2012] Offset between fit and detection position for source 4 = 0.732472 pixels
[Tue Jun 26 07:16:42 2012] 171.570150 total counts/ 3.691150 bgd. counts: snr = 87.380701
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.732472 pixels
  Position = (1087.3, 822.9) = 16 37 48.32 -47 22 19.9
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 167.9 +/- 13.1
  Background counts = 3.7
  Rate = 0.009 +/- 0.0007
[Tue Jun 26 07:16:42 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 07:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 07:16:42 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 07:16:42 2012] Source does appear to be extended
[Tue Jun 26 07:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 07:33:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 07:33:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 26 07:33:32 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Jun 26 07:33:32 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.923
[Tue Jun 26 07:33:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.64"
[Tue Jun 26 07:41:53 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass1_src1.ximg exists
[Tue Jun 26 07:41:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12522_pi14-548_cl_pass1_src1.csv
[Tue Jun 26 07:41:53 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jun 26 07:41:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12522_pi14-548_cl_pass1_src1.csv
[Tue Jun 26 07:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12522_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12522_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 07:41:53 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 26 07:41:53 2012] fullrun_ccd2_acisf12522_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 26 07:41:53 2012] Fit fullrun_ccd2_acisf12522_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 26 08:03:57 2012] Spatial fit model total counts = 172.586000, observed total counts = 173.000000
[Tue Jun 26 08:03:57 2012] Offset between fit and detection position for source 4 = 0.032172 pixels
[Tue Jun 26 08:03:57 2012] 172.231600 total counts/ 4.703600 bgd. counts: snr = 77.245326
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.032172 pixels
  Position = (1087.4, 822.9) = 16 37 48.32 -47 22 19.9
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 167.5 +/- 13.1
  Background counts = 4.7
  Rate = 0.009 +/- 0.0007
[Tue Jun 26 08:03:57 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 08:03:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 08:03:57 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 08:03:57 2012] Source does appear to be extended
[Tue Jun 26 08:03:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 08:10:39 2012] Writing source region out to fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4_src.reg
[Tue Jun 26 08:10:39 2012] Extracting stamp from image fullrun_ccd2_acisf12522_pi14-548_cl_sm2.00.img.gz, (1059, 794) - (1116, 852)
[Tue Jun 26 08:10:39 2012] Writing fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4.gif
[Tue Jun 26 08:10:41 2012] Size of ../../acisf12522/products/events/fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4_src.evt.gz[events] = 171 counts
[Tue Jun 26 08:10:41 2012] Mean chipx,y = (443.79, 935.92)
[Tue Jun 26 08:10:41 2012] Mean tdetx,y = (3996.92, 3642.21)
[Tue Jun 26 08:10:41 2012] chipx,y range = (425.00-462.00, 919.00-955.00)
[Tue Jun 26 08:10:41 2012] Size of ../../acisf12522/products/events/fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 9 counts
[Tue Jun 26 08:10:42 2012] rmf not found, will run specextract
[Tue Jun 26 08:10:42 2012] arf not found, will run specextract
[Tue Jun 26 08:11:20 2012] ../../acisf12522/products/spectra/fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4.warf not found
[Tue Jun 26 08:11:20 2012] ../../acisf12522/products/spectra/fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4.wrmf not found
[Tue Jun 26 08:11:20 2012] Removal of ../../acisf12522/products/spectra/fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4.soff failed
[Tue Jun 26 08:15:13 2012] Keeping rmf generated by specextract
[Tue Jun 26 08:15:13 2012] 185.051
[Tue Jun 26 08:21:28 2012] Updating aperture counts using extracted products
[Tue Jun 26 08:21:28 2012] Error reading totcts from fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Jun 26 08:21:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 08:21:28 2012] Using photon index=1.80, rate=0.00881, arf fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4.arf
[Tue Jun 26 08:21:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 26 08:21:28 2012] Updating source flux to 1.7e-13
[Tue Jun 26 08:21:36 2012] Reading fit data from acisf12522/analysis//spectral/fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4_pl.csv
[Tue Jun 26 08:21:36 2012] Spectral fit parameter nH value = 6.50419e+21
[Tue Jun 26 08:21:36 2012] Spectral fit parameter PhoIndex value = 1.46697
[Tue Jun 26 08:21:36 2012] Failed to get F(0.3-8.0) from acisf12522/analysis//spectral/fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 08:21:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 08:21:36 2012] Using Nh = 6.5e+21, photon index=1.47, rate=0.00881, arf fullrun_ccd2_acisf12522_pi14-548_pass1_cl_src4.arf
[Tue Jun 26 08:21:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 26 08:21:36 2012] Updating source flux to 1.4e-13