[Tue Jun 26 06:36:18 2012] Detection parameters:
  Position = (436.5, 953.9) = 16 37 11.51 -47 24 55.5
  Extent = 0.8" x 0.5", rotation angle = 135 degrees
  Source counts = 24.4 +/- 5.0
  Background counts = 0.6
  Rate = 0.001 +/- 0.0003

[Tue Jun 26 06:36:18 2012] Off-axis axis estimate = 4.02'
[Tue Jun 26 06:51:03 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 06:51:03 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Tue Jun 26 06:51:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.031
[Tue Jun 26 06:51:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 0.84"
[Tue Jun 26 06:56:53 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass0_src2.ximg exists
[Tue Jun 26 06:56:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12522_pi14-548_cl_pass0_src2.csv
[Tue Jun 26 06:56:53 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Jun 26 06:56:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12522_pi14-548_cl_pass0_src2.csv
[Tue Jun 26 06:56:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12522_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12522_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 06:56:53 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 26 06:56:53 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 26 06:56:53 2012] Fit fullrun_ccd1_acisf12522_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 26 07:16:41 2012] Spatial fit model total counts = 25.746700, observed total counts = 26.000000
[Tue Jun 26 07:16:41 2012] Offset between fit and detection position for source 3 = 0.824614 pixels
[Tue Jun 26 07:16:41 2012] 26.342350 total counts/ 7.580050 bgd. counts: snr = 6.814752
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.824614 pixels
  Position = (436.6, 954.8) = 16 37 11.53 -47 24 55.3
  Extent = 0.5 (0.4-1.0)", rotation angle = 0
  Source counts = 18.8 +/- 5.1
  Background counts = 7.6
  Rate = 0.001 +/- 0.0003
[Tue Jun 26 07:16:41 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 07:16:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 07:16:41 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 07:16:41 2012] Source does appear to be extended
[Tue Jun 26 07:16:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 07:28:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 07:28:03 2012] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Jun 26 07:28:03 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.906
[Tue Jun 26 07:28:03 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 0.53"
[Tue Jun 26 07:33:31 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass1_src2.ximg exists
[Tue Jun 26 07:33:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12522_pi14-548_cl_pass1_src2.csv
[Tue Jun 26 07:33:31 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Jun 26 07:33:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12522_pi14-548_cl_pass1_src2.csv
[Tue Jun 26 07:33:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12522_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12522_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 07:33:31 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 26 07:33:31 2012] fullrun_ccd1_acisf12522_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 26 07:33:31 2012] Fit fullrun_ccd1_acisf12522_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 26 08:03:56 2012] Spatial fit model total counts = 25.931900, observed total counts = 26.000000
[Tue Jun 26 08:03:56 2012] Offset between fit and detection position for source 3 = 0.045595 pixels
[Tue Jun 26 08:03:56 2012] 26.467540 total counts/ 6.490240 bgd. counts: snr = 7.841631
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.045595 pixels
  Position = (436.7, 954.8) = 16 37 11.53 -47 24 55.3
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 20.0 +/- 5.1
  Background counts = 6.5
  Rate = 0.001 +/- 0.0003
[Tue Jun 26 08:03:56 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 08:03:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 08:03:56 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 08:03:56 2012] Source does appear to be extended
[Tue Jun 26 08:03:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 08:08:07 2012] Writing source region out to fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3_src.reg
[Tue Jun 26 08:08:07 2012] Extracting stamp from image fullrun_ccd1_acisf12522_pi14-548_cl_sm2.00.img.gz, (410, 928) - (463, 981)
[Tue Jun 26 08:08:07 2012] Writing fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3.gif
[Tue Jun 26 08:08:49 2012] Size of ../../acisf12522/products/events/fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3_src.evt.gz[events] = 23 counts
[Tue Jun 26 08:08:49 2012] Mean chipx,y = (160.57, 596.00)
[Tue Jun 26 08:08:49 2012] Mean tdetx,y = (4536.00, 4267.57)
[Tue Jun 26 08:08:49 2012] chipx,y range = (145.00-177.00, 579.00-612.00)
[Tue Jun 26 08:08:49 2012] Size of ../../acisf12522/products/events/fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 8 counts
[Tue Jun 26 08:08:50 2012] Not generating rmf since there are only 19 counts
[Tue Jun 26 08:08:50 2012] arf not found, will run specextract
[Tue Jun 26 08:09:17 2012] ../../acisf12522/products/spectra/fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3.warf not found
[Tue Jun 26 08:09:17 2012] ../../acisf12522/products/spectra/fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3.wrmf not found
[Tue Jun 26 08:09:17 2012] Removal of ../../acisf12522/products/spectra/fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3.soff failed
[Tue Jun 26 08:10:39 2012] Spectrum 3 has only 20 counts, deleting rmf
[Tue Jun 26 08:10:39 2012] 195.923
[Tue Jun 26 08:21:27 2012] Updating aperture counts using extracted products
[Tue Jun 26 08:21:27 2012] Error reading totcts from fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Jun 26 08:21:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 08:21:27 2012] Using photon index=1.80, rate=0.00105, arf fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3.arf
[Tue Jun 26 08:21:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 26 08:21:27 2012] Updating source flux to 1.9e-14
[Tue Jun 26 08:21:31 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 26 08:21:32 2012] acisf12522/analysis//spectral/fullrun_ccd1_acisf12522_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete