[Mon Jun 18 17:46:26 2012] Detection parameters:
  Position = (418.3, 716.8) = 16 37 19.00 -46 45 22.9
  Extent = 0.8" x 0.5", rotation angle = 171 degrees
  Source counts = 15.4 +/- 4.0
  Background counts = 0.6
  Rate = 0.0008 +/- 0.0002

[Mon Jun 18 17:46:26 2012] Off-axis axis estimate = 5.39'
[Mon Jun 18 18:03:25 2012] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 18:03:25 2012] Initial guess for spatial extent in simple fitting = 1.34"
[Mon Jun 18 18:03:25 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.006
[Mon Jun 18 18:03:25 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 1.34"
[Mon Jun 18 18:13:31 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass0_src4.ximg exists
[Mon Jun 18 18:13:31 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass0_src4_1.ximg exists
[Mon Jun 18 18:13:31 2012] Fit fullrun_ccd3_acisf12518_pi14-548_cl_pass0_src4 appears to have run properly
[Mon Jun 18 18:13:31 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 18 18:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12518_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Jun 18 18:13:31 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 18 18:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12518_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Jun 18 18:13:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12518_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12518_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 18:25:13 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.404384 pixels away
[Mon Jun 18 18:25:13 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:25:13 2012] Assessing source extent using major
[Mon Jun 18 18:25:13 2012] Source does appear to be extended
[Mon Jun 18 18:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.63
[Mon Jun 18 18:25:13 2012] Source is asymmetric
[Mon Jun 18 18:38:36 2012] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 18:38:36 2012] Initial guess for spatial extent in simple fitting = 1.34"
[Mon Jun 18 18:38:36 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.006
[Mon Jun 18 18:38:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 1.34"
[Mon Jun 18 18:46:28 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass1_src4.ximg exists
[Mon Jun 18 18:46:28 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass1_src4_1.ximg exists
[Mon Jun 18 18:46:28 2012] Fit fullrun_ccd3_acisf12518_pi14-548_cl_pass1_src4 appears to have run properly
[Mon Jun 18 18:46:28 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 18 18:46:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12518_pi14-548_cl_pass1_tfrozen_src4.csv
[Mon Jun 18 18:46:28 2012] fullrun_ccd3_acisf12518_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 18 18:46:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12518_pi14-548_cl_pass1_tfrozen_src4.csv
[Mon Jun 18 18:46:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12518_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12518_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 18:55:48 2012] Spatial fit model total counts = 14.794000, observed total counts = 17.000000
[Mon Jun 18 18:55:48 2012] Offset between fit and detection position for source 3 = 0.661885 pixels
[Mon Jun 18 18:55:48 2012] 14.925000 total counts/ 0.000000 bgd. counts: snr = 177995188011739.343750
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.661885 pixels
  Position = (418.5, 717.4) = 16 37 19.02 -46 45 22.8
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon Jun 18 18:55:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:55:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:55:48 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 18:55:48 2012] Source does appear to be extended
[Mon Jun 18 18:55:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 19:09:19 2012] Writing source region out to fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3_src.reg
[Mon Jun 18 19:09:19 2012] Extracting stamp from image fullrun_ccd3_acisf12518_pi14-548_cl_sm2.00.img.gz, (375, 673) - (462, 761)
[Mon Jun 18 19:09:19 2012] Writing fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3.gif
[Mon Jun 18 19:11:05 2012] Size of ../../acisf12518/products/events/fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3_src.evt.gz[events] = 16 counts
[Mon Jun 18 19:11:05 2012] Mean chipx,y = (382.38, 694.31)
[Mon Jun 18 19:11:05 2012] Mean tdetx,y = (4437.69, 3443.38)
[Mon Jun 18 19:11:05 2012] chipx,y range = (364.00-397.00, 679.00-711.00)
[Mon Jun 18 19:11:05 2012] Size of ../../acisf12518/products/events/fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Mon Jun 18 19:11:06 2012] Not generating rmf since there are only 14 counts
[Mon Jun 18 19:11:06 2012] arf not found, will run specextract
[Mon Jun 18 19:11:32 2012] ../../acisf12518/products/spectra/fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3.warf not found
[Mon Jun 18 19:11:32 2012] ../../acisf12518/products/spectra/fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3.wrmf not found
[Mon Jun 18 19:11:32 2012] Removal of ../../acisf12518/products/spectra/fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3.soff failed
[Mon Jun 18 19:16:21 2012] Spectrum 3 has only 15 counts, deleting rmf
[Mon Jun 18 19:16:21 2012] 180.041
[Mon Jun 18 19:17:06 2012] Updating aperture counts using extracted products
[Mon Jun 18 19:17:06 2012] Error reading totcts from fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Jun 18 19:17:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 19:17:06 2012] Using photon index=1.80, rate=0.000765, arf fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3.arf
[Mon Jun 18 19:17:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun 18 19:17:06 2012] Updating source flux to 1.5e-14
[Mon Jun 18 19:17:15 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 18 19:17:16 2012] acisf12518/analysis//spectral/fullrun_ccd3_acisf12518_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete