[Sat Jun 16 10:09:28 2012] Detection parameters:
  Position = (798.0, 1021.7) = 16 38 25.20 -47 1 34.8
  Extent = 0.7" x 0.5", rotation angle = 58 degrees
  Source counts = 12.4 +/- 3.6
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0002

[Sat Jun 16 10:09:28 2012] Off-axis axis estimate = 3.18'
[Sat Jun 16 10:13:47 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 10:13:47 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Jun 16 10:13:47 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.974
[Sat Jun 16 10:13:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.62"
[Sat Jun 16 10:20:28 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass0_src3.ximg exists
[Sat Jun 16 10:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12517_pi14-548_cl_pass0_src3.csv
[Sat Jun 16 10:20:28 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Jun 16 10:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12517_pi14-548_cl_pass0_src3.csv
[Sat Jun 16 10:20:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12517_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12517_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 10:20:28 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 16 10:20:28 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 16 10:20:28 2012] Fit fullrun_ccd0_acisf12517_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 16 10:43:33 2012] Spatial fit model total counts = 15.573100, observed total counts = 16.000000
[Sat Jun 16 10:43:33 2012] Offset between fit and detection position for source 4 = 0.665495 pixels
[Sat Jun 16 10:43:33 2012] 15.672680 total counts/ 3.599380 bgd. counts: snr = 6.363736
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.665495 pixels
  Position = (798.4, 1022.3) = 16 38 25.20 -47 1 34.8
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 12.1 +/- 4.0
  Background counts = 3.6
  Rate = 0.0006 +/- 0.0002
[Sat Jun 16 10:43:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 10:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 10:43:33 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 10:43:33 2012] Source does appear to be extended
[Sat Jun 16 10:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 10:43:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 10:43:50 2012] Initial guess for spatial extent in simple fitting = 0.90"
[Sat Jun 16 10:43:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.157
[Sat Jun 16 10:43:50 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.90"
[Sat Jun 16 10:48:31 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass1_src3.ximg exists
[Sat Jun 16 10:48:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12517_pi14-548_cl_pass1_src3.csv
[Sat Jun 16 10:48:31 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Jun 16 10:48:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12517_pi14-548_cl_pass1_src3.csv
[Sat Jun 16 10:48:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12517_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12517_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 10:48:31 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 16 10:48:31 2012] fullrun_ccd0_acisf12517_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 16 10:48:31 2012] Fit fullrun_ccd0_acisf12517_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 16 11:04:37 2012] Spatial fit model total counts = 17.904900, observed total counts = 18.000000
[Sat Jun 16 11:04:37 2012] Offset between fit and detection position for source 4 = 0.112066 pixels
[Sat Jun 16 11:04:37 2012] 18.410210 total counts/ 7.659910 bgd. counts: snr = 3.884264
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.112066 pixels
  Position = (798.3, 1022.2) = 16 38 25.21 -47 1 34.9
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 10.8 +/- 4.3
  Background counts = 7.7
  Rate = 0.0006 +/- 0.0002
[Sat Jun 16 11:04:37 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 11:04:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 11:04:37 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 11:04:37 2012] Source does appear to be extended
[Sat Jun 16 11:04:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 11:04:54 2012] Writing source region out to fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4_src.reg
[Sat Jun 16 11:04:54 2012] Extracting stamp from image fullrun_ccd0_acisf12517_pi14-548_cl_sm2.00.img.gz, (762, 986) - (835, 1059)
[Sat Jun 16 11:04:54 2012] Writing fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4.gif
[Sat Jun 16 11:06:39 2012] Size of ../../acisf12517/products/events/fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4_src.evt.gz[events] = 13 counts
[Sat Jun 16 11:06:39 2012] Mean chipx,y = (830.08, 789.31)
[Sat Jun 16 11:06:39 2012] Mean tdetx,y = (3850.31, 4301.92)
[Sat Jun 16 11:06:39 2012] chipx,y range = (816.00-846.00, 773.00-803.00)
[Sat Jun 16 11:06:39 2012] Size of ../../acisf12517/products/events/fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 10 counts
[Sat Jun 16 11:06:40 2012] Not generating rmf since there are only 10 counts
[Sat Jun 16 11:06:40 2012] arf not found, will run specextract
[Sat Jun 16 11:07:10 2012] ../../acisf12517/products/spectra/fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4.warf not found
[Sat Jun 16 11:07:10 2012] ../../acisf12517/products/spectra/fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4.wrmf not found
[Sat Jun 16 11:07:10 2012] Removal of ../../acisf12517/products/spectra/fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4.soff failed
[Sat Jun 16 11:08:40 2012] Spectrum 4 has only 11 counts, deleting rmf
[Sat Jun 16 11:08:40 2012] 195.568
[Sat Jun 16 11:27:00 2012] Updating aperture counts using extracted products
[Sat Jun 16 11:27:00 2012] Error reading totcts from fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Jun 16 11:27:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 11:27:00 2012] Using photon index=1.80, rate=0.000551, arf fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4.arf
[Sat Jun 16 11:27:00 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 16 11:27:00 2012] Updating source flux to 1e-14
[Sat Jun 16 11:27:03 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 16 11:27:09 2012] acisf12517/analysis//spectral/fullrun_ccd0_acisf12517_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete