[Sun Jan 13 18:17:57 2013] Detection parameters:
  Position = (686.6, 333.1) = 16 38 45.44 -46 47 35.8
  Extent = 0.6" x 0.5", rotation angle = 163 degrees
  Source counts = 18.5 +/- 4.4
  Background counts = 0.5
  Rate = 0.0009 +/- 0.0002

[Sun Jan 13 18:17:57 2013] Off-axis axis estimate = 3.87'
[Sun Jan 13 18:57:16 2013] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Sun Jan 13 18:57:16 2013] Initial guess for spatial extent in simple fitting = 0.79"
[Sun Jan 13 18:57:16 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.122
[Sun Jan 13 18:57:16 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.79"
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src4.ximg exists
[Sun Jan 13 19:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src4.csv
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src4_1.ximg exists
[Sun Jan 13 19:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src4.csv
[Sun Jan 13 19:17:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun Jan 13 19:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src4.csv
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jan 13 19:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src4.csv
[Sun Jan 13 19:17:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 19:17:13 2013] Spatial fit model total counts = 17.394500, observed total counts = 20.000000
[Sun Jan 13 19:17:13 2013] Offset between fit and detection position for source 9 = 0.712713 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.712713 pixels
  Position = (687.1, 333.6) = 16 38 45.44 -46 47 35.8
  Extent = 0.8 (0.6-1.2)" x 0.5 (0.3-0.6)", rotation angle = 15 (350-42) degrees
  Source counts = 17.8 +/- 4.2
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sun Jan 13 19:17:13 2013] Vigneting correction estimate = 1.000000
[Sun Jan 13 19:17:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 13 19:17:13 2013] Assessing source extent using major axis lower bound
[Sun Jan 13 19:17:13 2013] Source does appear to be extended
[Sun Jan 13 19:17:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Sun Jan 13 19:17:13 2013] Deleting source due to low Poisson probability 0.9