[Sun Jan 13 18:17:57 2013] Detection parameters:
  Position = (256.2, 764.4) = 16 39 6.05 -46 44 3.7
  Extent = 0.9" x 0.6", rotation angle = 170 degrees
  Source counts = 20.9 +/- 4.7
  Background counts = 1.1
  Rate = 0.001 +/- 0.0002

[Sun Jan 13 18:17:57 2013] Off-axis axis estimate = 5.71'
[Sun Jan 13 18:57:16 2013] Using EEF radius (= 1.49 ")to estimate initial spatial extent for simple fitting
[Sun Jan 13 18:57:16 2013] Initial guess for spatial extent in simple fitting = 1.49"
[Sun Jan 13 18:57:16 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Sun Jan 13 18:57:16 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 1.49"
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src3.ximg exists
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Jan 13 19:17:06 2013] Fit fullrun_ccd3_acisf12514_pi14-548_cl_pass0_src3 appears to have run properly
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Jan 13 19:17:06 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jan 13 19:17:06 2013] Fit fullrun_ccd3_acisf12514_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jan 13 19:17:13 2013] Spatial fit model total counts = 36.895200, observed total counts = 40.000000
[Sun Jan 13 19:17:13 2013] Offset between fit and detection position for source 2 = 1.289449 pixels
[Sun Jan 13 19:17:13 2013] 35.050474 total counts/ 0.149374 bgd. counts: snr = 90.302882
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.289449 pixels
  Position = (255.8, 765.6) = 16 39 6.09 -46 44 3.4
  Extent = 1.5 (1.2-1.7)", rotation angle = 0
  Source counts = 34.9 +/- 5.9
  Background counts = 0.1
  Rate = 0.002 +/- 0.0003
[Sun Jan 13 19:17:13 2013] Vigneting correction estimate = 1.000000
[Sun Jan 13 19:17:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 13 19:17:13 2013] Assessing source extent using major axis lower bound
[Sun Jan 13 19:17:13 2013] Source does appear to be extended
[Sun Jan 13 19:17:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 13 19:45:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan 13 19:45:53 2013] Initial guess for spatial extent in simple fitting = 1.46"
[Sun Jan 13 19:45:53 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.021
[Sun Jan 13 19:45:53 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 1.46"
[Sun Jan 13 20:00:22 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass1_src3.ximg exists
[Sun Jan 13 20:00:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass1_src3.csv
[Sun Jan 13 20:00:22 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Jan 13 20:00:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass1_src3.csv
[Sun Jan 13 20:00:22 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12514_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12514_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 20:00:22 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Jan 13 20:00:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Jan 13 20:00:22 2013] fullrun_ccd3_acisf12514_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jan 13 20:00:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12514_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Jan 13 20:00:22 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12514_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12514_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 13 20:00:27 2013] Spatial fit model total counts = 35.539600, observed total counts = 39.000000
[Sun Jan 13 20:00:27 2013] Offset between fit and detection position for source 2 = 0.496764 pixels
[Sun Jan 13 20:00:27 2013] 35.562720 total counts/ 7.995620 bgd. counts: snr = 9.749111
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.496764 pixels
  Position = (255.4, 765.4) = 16 39 6.12 -46 44 3.5
  Extent = 1.4 (0.9-2.0)", rotation angle = 0
  Source counts = 27.6 +/- 6.0
  Background counts = 8.0
  Rate = 0.001 +/- 0.0003
[Sun Jan 13 20:00:27 2013] Vigneting correction estimate = 1.000000
[Sun Jan 13 20:00:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 13 20:00:27 2013] Assessing source extent using major axis lower bound
[Sun Jan 13 20:00:27 2013] Source does appear to be extended
[Sun Jan 13 20:00:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 13 20:12:28 2013] Writing source region out to fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2_src.reg
[Sun Jan 13 20:12:28 2013] Extracting stamp from image fullrun_ccd3_acisf12514_pi14-548_cl_sm2.00.img.gz, (193, 703) - (318, 828)
[Sun Jan 13 20:12:28 2013] Writing fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2.gif
[Sun Jan 13 20:13:38 2013] Size of ../../acisf12514/products/events/fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2_src.evt.gz[events] = 41 counts
[Sun Jan 13 20:13:38 2013] Mean chipx,y = (278.17, 850.83)
[Sun Jan 13 20:13:38 2013] Mean tdetx,y = (4281.17, 3339.17)
[Sun Jan 13 20:13:38 2013] chipx,y range = (259.00-300.00, 825.00-870.00)
[Sun Jan 13 20:13:38 2013] Size of ../../acisf12514/products/events/fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 40 counts
[Sun Jan 13 20:13:39 2013] Not generating rmf since there are only 27 counts
[Sun Jan 13 20:13:39 2013] arf not found, will run specextract
[Sun Jan 13 20:14:07 2013] ../../acisf12514/products/spectra/fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2.warf not found
[Sun Jan 13 20:14:07 2013] ../../acisf12514/products/spectra/fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2.wrmf not found
[Sun Jan 13 20:14:07 2013] Removal of ../../acisf12514/products/spectra/fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2.soff failed
[Sun Jan 13 20:14:14 2013] Spectrum 2 has only 28 counts, deleting rmf
[Sun Jan 13 20:14:14 2013] 175.841
[Sun Jan 13 20:14:17 2013] Updating aperture counts using extracted products
[Sun Jan 13 20:14:17 2013] Error reading totcts from fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Jan 13 20:14:17 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jan 13 20:14:17 2013] Using photon index=1.80, rate=0.00139, arf fullrun_ccd3_acisf12514_pi14-548_pass1_cl_src2.arf
[Sun Jan 13 20:14:17 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jan 13 20:14:17 2013] Updating source flux to 2.8e-14
[Sun Jan 13 20:14:25 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting