[Mon Jul  9 23:54:02 2012] Detection parameters:
  Position = (869.4, 325.1) = 16 39 29.73 -46 38 39.0
  Extent = 0.6" x 0.5", rotation angle = 141 degrees
  Source counts = 30.2 +/- 5.6
  Background counts = 0.8
  Rate = 0.002 +/- 0.0003

[Mon Jul  9 23:54:03 2012] Off-axis axis estimate = 4.25'
[Tue Jul 10 00:23:50 2012] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 00:23:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 10 00:23:50 2012] Initial guess for spatial extent in simple fitting = 0.91"
[Tue Jul 10 00:23:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Tue Jul 10 00:23:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.91"
[Tue Jul 10 00:31:46 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass0_src1.ximg exists
[Tue Jul 10 00:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12511_pi14-548_cl_pass0_src1.csv
[Tue Jul 10 00:31:46 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jul 10 00:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12511_pi14-548_cl_pass0_src1.csv
[Tue Jul 10 00:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12511_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12511_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 00:31:46 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 10 00:31:46 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 10 00:31:46 2012] Fit fullrun_ccd3_acisf12511_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 10 00:31:52 2012] Spatial fit model total counts = 33.999000, observed total counts = 34.000000
[Tue Jul 10 00:31:52 2012] Offset between fit and detection position for source 2 = 0.825264 pixels
[Tue Jul 10 00:31:52 2012] 33.993960 total counts/ 8.005360 bgd. counts: snr = 9.185281
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.825264 pixels
  Position = (870.2, 325.4) = 16 39 29.72 -46 38 39.1
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 26.0 +/- 5.8
  Background counts = 8.0
  Rate = 0.001 +/- 0.0003
[Tue Jul 10 00:31:52 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 00:31:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 00:31:52 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 00:31:52 2012] Source does appear to be extended
[Tue Jul 10 00:31:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 00:50:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 00:50:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 10 00:50:12 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Tue Jul 10 00:50:12 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.921
[Tue Jul 10 00:50:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.52"
[Tue Jul 10 00:56:43 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass1_src1.ximg exists
[Tue Jul 10 00:56:43 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jul 10 00:56:43 2012] Fit fullrun_ccd3_acisf12511_pi14-548_cl_pass1_src1 appears to have run properly
[Tue Jul 10 00:56:43 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 00:56:43 2012] fullrun_ccd3_acisf12511_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 00:56:43 2012] Fit fullrun_ccd3_acisf12511_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 10 00:56:47 2012] Spatial fit model total counts = 34.421300, observed total counts = 34.000000
[Tue Jul 10 00:56:47 2012] Offset between fit and detection position for source 2 = 0.275773 pixels
[Tue Jul 10 00:56:47 2012] 34.644840 total counts/ 4.468340 bgd. counts: snr = 14.275646
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.275773 pixels
  Position = (869.9, 325.6) = 16 39 29.73 -46 38 39.0
  Extent = 0.7 (0.4-0.8)", rotation angle = 0
  Source counts = 30.2 +/- 5.9
  Background counts = 4.5
  Rate = 0.002 +/- 0.0003
[Tue Jul 10 00:56:47 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 00:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 00:56:47 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 00:56:47 2012] Source does appear to be extended
[Tue Jul 10 00:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 01:05:35 2012] Writing source region out to fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2_src.reg
[Tue Jul 10 01:05:35 2012] Extracting stamp from image fullrun_ccd3_acisf12511_pi14-548_cl_sm2.00.img.gz, (839, 295) - (901, 357)
[Tue Jul 10 01:05:35 2012] Writing fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2.gif
[Tue Jul 10 01:05:36 2012] Size of ../../acisf12511/products/events/fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2_src.evt.gz[events] = 31 counts
[Tue Jul 10 01:05:36 2012] Mean chipx,y = (912.06, 503.00)
[Tue Jul 10 01:05:36 2012] Mean tdetx,y = (4629.00, 3973.06)
[Tue Jul 10 01:05:36 2012] chipx,y range = (896.00-929.00, 483.00-516.00)
[Tue Jul 10 01:05:36 2012] Size of ../../acisf12511/products/events/fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 11 counts
[Tue Jul 10 01:05:38 2012] Not generating rmf since there are only 30 counts
[Tue Jul 10 01:05:38 2012] arf not found, will run specextract
[Tue Jul 10 01:06:01 2012] ../../acisf12511/products/spectra/fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2.warf not found
[Tue Jul 10 01:06:01 2012] ../../acisf12511/products/spectra/fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2.wrmf not found
[Tue Jul 10 01:06:01 2012] Removal of ../../acisf12511/products/spectra/fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2.soff failed
[Tue Jul 10 01:11:21 2012] Spectrum 2 has only 30 counts, deleting rmf
[Tue Jul 10 01:11:21 2012] 192.285
[Tue Jul 10 01:11:24 2012] Updating aperture counts using extracted products
[Tue Jul 10 01:11:24 2012] Error reading totcts from fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Jul 10 01:11:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 01:11:24 2012] Using photon index=1.80, rate=0.00156, arf fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2.arf
[Tue Jul 10 01:11:24 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jul 10 01:11:24 2012] Updating source flux to 2.9e-14
[Tue Jul 10 01:11:37 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jul 10 01:11:38 2012] acisf12511/analysis//spectral/fullrun_ccd3_acisf12511_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete