[Tue Jun 19 17:27:43 2012] Detection parameters:
  Position = (160.6, 502.0) = 16 41 30.72 -46 30 47.6
  Extent = 3.1" x 2.3", rotation angle = 56 degrees
  Source counts = 184.6 +/- 14.6
  Background counts = 29.4
  Rate = 0.01 +/- 0.0008

[Tue Jun 19 17:27:43 2012] Off-axis axis estimate = 9.27'
[Tue Jun 19 17:46:11 2012] Using EEF radius (= 3.80 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:46:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 17:46:11 2012] Initial guess for spatial extent in simple fitting = 3.80"
[Tue Jun 19 17:46:11 2012] source mask rpix=7.7, npix_max = 270, mask sum = 272, frac = 1.006
[Tue Jun 19 17:46:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.80"
[Tue Jun 19 17:56:42 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass0_src1.ximg exists
[Tue Jun 19 17:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12508_pi14-548_cl_pass0_src1.csv
[Tue Jun 19 17:56:43 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jun 19 17:56:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12508_pi14-548_cl_pass0_src1.csv
[Tue Jun 19 17:56:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12508_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12508_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 17:56:43 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 17:56:43 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 17:56:43 2012] Fit fullrun_ccd2_acisf12508_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 18:11:03 2012] Spatial fit model total counts = 244.153000, observed total counts = 250.000000
[Tue Jun 19 18:11:03 2012] Offset between fit and detection position for source 1 = 1.901855 pixels
[Tue Jun 19 18:11:03 2012] 244.895700 total counts/ 28.117700 bgd. counts: snr = 40.881358
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.901855 pixels
  Position = (158.8, 501.3) = 16 41 30.83 -46 30 48.2
  Extent = 3.4 (2.9-4.1)", rotation angle = 0
  Source counts = 216.8 +/- 15.6
  Background counts = 28.1
  Rate = 0.01 +/- 0.0008
[Tue Jun 19 18:11:03 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:11:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:11:03 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:11:03 2012] Source does appear to be extended
[Tue Jun 19 18:11:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:29:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 18:29:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 18:29:29 2012] Initial guess for spatial extent in simple fitting = 3.44"
[Tue Jun 19 18:29:29 2012] source mask rpix=7.0, npix_max = 224, mask sum = 223, frac = 0.994
[Tue Jun 19 18:29:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.44"
[Tue Jun 19 18:37:44 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass1_src1.ximg exists
[Tue Jun 19 18:37:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12508_pi14-548_cl_pass1_src1.csv
[Tue Jun 19 18:37:44 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jun 19 18:37:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12508_pi14-548_cl_pass1_src1.csv
[Tue Jun 19 18:37:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12508_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12508_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:37:44 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 18:37:44 2012] fullrun_ccd2_acisf12508_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 18:37:44 2012] Fit fullrun_ccd2_acisf12508_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 18:52:45 2012] Spatial fit model total counts = 237.454000, observed total counts = 248.000000
[Tue Jun 19 18:52:45 2012] Offset between fit and detection position for source 1 = 0.332848 pixels
[Tue Jun 19 18:52:45 2012] 238.791700 total counts/ 41.506700 bgd. counts: snr = 30.622099
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.332848 pixels
  Position = (158.5, 501.2) = 16 41 30.84 -46 30 48.3
  Extent = 3.1 (2.6-3.8)", rotation angle = 0
  Source counts = 197.3 +/- 15.5
  Background counts = 41.5
  Rate = 0.01 +/- 0.0008
[Tue Jun 19 18:52:45 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:52:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:52:45 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:52:45 2012] Source does appear to be extended
[Tue Jun 19 18:52:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:01:21 2012] Writing source region out to fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1_src.reg
[Tue Jun 19 19:01:21 2012] Extracting stamp from image fullrun_ccd2_acisf12508_pi14-548_cl_sm2.00.img.gz, (17, 360) - (300, 643)
[Tue Jun 19 19:01:21 2012] Writing fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1.gif
[Tue Jun 19 19:01:22 2012] Size of ../../acisf12508/products/events/fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1_src.evt.gz[events] = 240 counts
[Tue Jun 19 19:01:22 2012] Mean chipx,y = (532.54, 21.27)
[Tue Jun 19 19:01:22 2012] Mean tdetx,y = (3082.28, 3553.46)
[Tue Jun 19 19:01:22 2012] chipx,y range = (506.00-563.00, 5.00-50.00)
[Tue Jun 19 19:01:22 2012] Size of ../../acisf12508/products/events/fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 44 counts
[Tue Jun 19 19:01:23 2012] rmf not found, will run specextract
[Tue Jun 19 19:01:23 2012] arf not found, will run specextract
[Tue Jun 19 19:01:31 2012] ../../acisf12508/products/spectra/fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1.warf not found
[Tue Jun 19 19:01:31 2012] ../../acisf12508/products/spectra/fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1.wrmf not found
[Tue Jun 19 19:01:31 2012] Removal of ../../acisf12508/products/spectra/fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1.soff failed
[Tue Jun 19 19:04:39 2012] Keeping rmf generated by specextract
[Tue Jun 19 19:04:39 2012] 87.4582
[Tue Jun 19 19:13:16 2012] Updating aperture counts using extracted products
[Tue Jun 19 19:13:16 2012] Error reading totcts from fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Jun 19 19:13:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 19:13:16 2012] Using photon index=1.80, rate=0.0107, arf fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1.arf
[Tue Jun 19 19:13:16 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 19 19:13:16 2012] Updating source flux to 4.2e-13
[Tue Jun 19 19:13:28 2012] Reading fit data from acisf12508/analysis//spectral/fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1_pl.csv
[Tue Jun 19 19:13:28 2012] Spectral fit parameter nH value = 1.56537e+21
[Tue Jun 19 19:13:28 2012] Spectral fit parameter PhoIndex value = 2.22153
[Tue Jun 19 19:13:28 2012] Failed to get F(0.3-8.0) from acisf12508/analysis//spectral/fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 19:13:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 19:13:28 2012] Using Nh = 1.6e+21, photon index=2.22, rate=0.0107, arf fullrun_ccd2_acisf12508_pi14-548_pass1_cl_src1.arf
[Tue Jun 19 19:13:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 19 19:13:28 2012] Updating source flux to 2.4e-13