[Tue Jun 19 17:27:11 2012] Detection parameters:
  Position = (854.3, 1074.4) = 16 39 55.26 -46 31 45.3
  Extent = 1.9" x 1.3", rotation angle = 132 degrees
  Source counts = 160.2 +/- 13.0
  Background counts = 7.8
  Rate = 0.009 +/- 0.0007

[Tue Jun 19 17:27:11 2012] Off-axis axis estimate = 7.21'
[Tue Jun 19 17:38:59 2012] Using EEF radius (= 2.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:38:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 17:38:59 2012] Initial guess for spatial extent in simple fitting = 2.31"
[Tue Jun 19 17:38:59 2012] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.020
[Tue Jun 19 17:38:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.31"
[Tue Jun 19 17:46:11 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass0_src1.ximg exists
[Tue Jun 19 17:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12508_pi14-548_cl_pass0_src1.csv
[Tue Jun 19 17:46:11 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jun 19 17:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12508_pi14-548_cl_pass0_src1.csv
[Tue Jun 19 17:46:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12508_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12508_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 17:46:11 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 17:46:11 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 17:46:11 2012] Fit fullrun_ccd1_acisf12508_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 18:11:02 2012] Spatial fit model total counts = 171.144000, observed total counts = 172.000000
[Tue Jun 19 18:11:02 2012] Offset between fit and detection position for source 1 = 0.720638 pixels
[Tue Jun 19 18:11:02 2012] 171.515900 total counts/ 11.710900 bgd. counts: snr = 46.697672
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.720638 pixels
  Position = (854.8, 1074.9) = 16 39 55.26 -46 31 45.3
  Extent = 2.0 (1.9-2.3)", rotation angle = 0
  Source counts = 159.8 +/- 13.1
  Background counts = 11.7
  Rate = 0.009 +/- 0.0007
[Tue Jun 19 18:11:02 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:11:02 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:11:02 2012] Source does appear to be extended
[Tue Jun 19 18:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:20:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 18:20:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 18:20:32 2012] Initial guess for spatial extent in simple fitting = 2.05"
[Tue Jun 19 18:20:32 2012] source mask rpix=4.2, npix_max = 86, mask sum = 90, frac = 1.035
[Tue Jun 19 18:20:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.05"
[Tue Jun 19 18:29:29 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass1_src1.ximg exists
[Tue Jun 19 18:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12508_pi14-548_cl_pass1_src1.csv
[Tue Jun 19 18:29:29 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jun 19 18:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12508_pi14-548_cl_pass1_src1.csv
[Tue Jun 19 18:29:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12508_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12508_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:29:29 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 18:29:29 2012] fullrun_ccd1_acisf12508_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 18:29:29 2012] Fit fullrun_ccd1_acisf12508_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 18:52:44 2012] Spatial fit model total counts = 170.008000, observed total counts = 170.000000
[Tue Jun 19 18:52:44 2012] Offset between fit and detection position for source 1 = 0.150303 pixels
[Tue Jun 19 18:52:44 2012] 169.593800 total counts/ 11.383800 bgd. counts: snr = 46.891087
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.150303 pixels
  Position = (854.9, 1075.0) = 16 39 55.25 -46 31 45.3
  Extent = 2.0 (1.8-2.3)", rotation angle = 0
  Source counts = 158.2 +/- 13.0
  Background counts = 11.4
  Rate = 0.009 +/- 0.0007
[Tue Jun 19 18:52:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:52:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:52:44 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:52:44 2012] Source does appear to be extended
[Tue Jun 19 18:52:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:57:57 2012] Writing source region out to fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1_src.reg
[Tue Jun 19 18:57:57 2012] Extracting stamp from image fullrun_ccd1_acisf12508_pi14-548_cl_sm2.00.img.gz, (763, 983) - (947, 1167)
[Tue Jun 19 18:57:57 2012] Writing fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1.gif
[Tue Jun 19 18:57:58 2012] Size of ../../acisf12508/products/events/fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1_src.evt.gz[events] = 167 counts
[Tue Jun 19 18:57:58 2012] Mean chipx,y = (167.63, 180.74)
[Tue Jun 19 18:57:58 2012] Mean tdetx,y = (4951.26, 4274.63)
[Tue Jun 19 18:57:58 2012] chipx,y range = (142.00-189.00, 155.00-204.00)
[Tue Jun 19 18:57:58 2012] Size of ../../acisf12508/products/events/fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 54 counts
[Tue Jun 19 18:57:59 2012] rmf not found, will run specextract
[Tue Jun 19 18:57:59 2012] arf not found, will run specextract
[Tue Jun 19 18:58:15 2012] ../../acisf12508/products/spectra/fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1.warf not found
[Tue Jun 19 18:58:15 2012] ../../acisf12508/products/spectra/fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1.wrmf not found
[Tue Jun 19 18:58:15 2012] Removal of ../../acisf12508/products/spectra/fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1.soff failed
[Tue Jun 19 19:01:20 2012] Keeping rmf generated by specextract
[Tue Jun 19 19:01:20 2012] 178.995
[Tue Jun 19 19:13:16 2012] Updating aperture counts using extracted products
[Tue Jun 19 19:13:16 2012] Error reading totcts from fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Jun 19 19:13:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 19:13:16 2012] Using photon index=1.80, rate=0.00854, arf fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1.arf
[Tue Jun 19 19:13:16 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 19 19:13:16 2012] Updating source flux to 1.6e-13
[Tue Jun 19 19:13:25 2012] Reading fit data from acisf12508/analysis//spectral/fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1_pl.csv
[Tue Jun 19 19:13:25 2012] Spectral fit parameter nH value = 9.35784e+20
[Tue Jun 19 19:13:25 2012] Spectral fit parameter PhoIndex value = 1.80129
[Tue Jun 19 19:13:25 2012] Failed to get F(0.3-8.0) from acisf12508/analysis//spectral/fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 19:13:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 19:13:25 2012] Using Nh = 9.4e+20, photon index=1.80, rate=0.00854, arf fullrun_ccd1_acisf12508_pi14-548_pass1_cl_src1.arf
[Tue Jun 19 19:13:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 19 19:13:25 2012] Updating source flux to 1.1e-13