[Tue Jun 19 17:26:40 2012] Detection parameters:
  Position = (802.4, 964.9) = 16 40 44.89 -46 35 9.2
  Extent = 0.5" x 0.5", rotation angle = 120 degrees
  Source counts = 14.6 +/- 3.9
  Background counts = 0.4
  Rate = 0.0008 +/- 0.0002

[Tue Jun 19 17:26:40 2012] Off-axis axis estimate = 3.58'
[Tue Jun 19 17:31:16 2012] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:31:16 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Jun 19 17:31:16 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.055
[Tue Jun 19 17:31:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.71"
[Tue Jun 19 17:38:59 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass0_src4.ximg exists
[Tue Jun 19 17:38:59 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass0_src4_1.ximg exists
[Tue Jun 19 17:38:59 2012] Fit fullrun_ccd0_acisf12508_pi14-548_cl_pass0_src4 appears to have run properly
[Tue Jun 19 17:38:59 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun 19 17:38:59 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun 19 17:38:59 2012] Fit fullrun_ccd0_acisf12508_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jun 19 18:11:02 2012] Spatial fit model total counts = 15.044500, observed total counts = 16.000000
[Tue Jun 19 18:11:02 2012] Offset between fit and detection position for source 4 = 0.923884 pixels
[Tue Jun 19 18:11:02 2012] 14.617480 total counts/ 1.726280 bgd. counts: snr = 9.811552
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.923884 pixels
  Position = (802.7, 965.8) = 16 40 44.90 -46 35 9.0
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 12.9 +/- 3.8
  Background counts = 1.7
  Rate = 0.0007 +/- 0.0002
[Tue Jun 19 18:11:02 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:11:02 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:11:02 2012] Source does appear to be extended
[Tue Jun 19 18:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:11:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 18:11:19 2012] Initial guess for spatial extent in simple fitting = 0.31"
[Tue Jun 19 18:11:19 2012] source mask rpix=0.6, npix_max = 5, mask sum = 4, frac = 0.789
[Tue Jun 19 18:11:19 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.31"
[Tue Jun 19 18:20:32 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass1_src4.ximg exists
[Tue Jun 19 18:20:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12508_pi14-548_cl_pass1_src4.csv
[Tue Jun 19 18:20:32 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass1_src4_1.ximg exists
[Tue Jun 19 18:20:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12508_pi14-548_cl_pass1_src4.csv
[Tue Jun 19 18:20:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12508_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12508_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:20:32 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Tue Jun 19 18:20:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12508_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Jun 19 18:20:32 2012] fullrun_ccd0_acisf12508_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jun 19 18:20:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12508_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Jun 19 18:20:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12508_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12508_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:52:43 2012] Spatial fit model total counts = 14.275400, observed total counts = 16.000000
[Tue Jun 19 18:52:43 2012] Offset between fit and detection position for source 4 = 0.039036 pixels
[Tue Jun 19 18:52:43 2012] 13.598246 total counts/ 0.237346 bgd. counts: snr = 27.424881
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.039036 pixels
  Position = (802.7, 965.7) = 16 40 44.90 -46 35 9.1
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 13.4 +/- 3.7
  Background counts = 0.2
  Rate = 0.0007 +/- 0.0002
[Tue Jun 19 18:52:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:52:43 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:52:43 2012] Source does appear to be extended
[Tue Jun 19 18:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:53:01 2012] Writing source region out to fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4_src.reg
[Tue Jun 19 18:53:01 2012] Extracting stamp from image fullrun_ccd0_acisf12508_pi14-548_cl_sm2.00.img.gz, (789, 952) - (816, 979)
[Tue Jun 19 18:53:01 2012] Writing fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4.gif
[Tue Jun 19 18:54:35 2012] Size of ../../acisf12508/products/events/fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4_src.evt.gz[events] = 13 counts
[Tue Jun 19 18:54:35 2012] Mean chipx,y = (779.08, 767.31)
[Tue Jun 19 18:54:35 2012] Mean tdetx,y = (3828.31, 4352.92)
[Tue Jun 19 18:54:35 2012] chipx,y range = (765.00-799.00, 754.00-787.00)
[Tue Jun 19 18:54:35 2012] Size of ../../acisf12508/products/events/fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 2 counts
[Tue Jun 19 18:54:36 2012] Not generating rmf since there are only 13 counts
[Tue Jun 19 18:54:36 2012] arf not found, will run specextract
[Tue Jun 19 18:55:01 2012] ../../acisf12508/products/spectra/fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4.warf not found
[Tue Jun 19 18:55:01 2012] ../../acisf12508/products/spectra/fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4.wrmf not found
[Tue Jun 19 18:55:01 2012] Removal of ../../acisf12508/products/spectra/fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4.soff failed
[Tue Jun 19 18:57:57 2012] Spectrum 4 has only 13 counts, deleting rmf
[Tue Jun 19 18:57:57 2012] 179.989
[Tue Jun 19 19:13:15 2012] Updating aperture counts using extracted products
[Tue Jun 19 19:13:15 2012] Error reading totcts from fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Jun 19 19:13:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 19:13:15 2012] Using photon index=1.80, rate=0.000722, arf fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4.arf
[Tue Jun 19 19:13:15 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 19 19:13:15 2012] Updating source flux to 1.4e-14
[Tue Jun 19 19:13:18 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 19 19:13:19 2012] acisf12508/analysis//spectral/fullrun_ccd0_acisf12508_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete