[Wed Jun 20 18:18:59 2012] Detection parameters:
  Position = (591.9, 1075.4) = 16 41 14.91 -46 31 33.6
  Extent = 2.4" x 2.3", rotation angle = 164 degrees
  Source counts = 34.1 +/- 6.6
  Background counts = 9.9
  Rate = 0.002 +/- 0.0004

[Wed Jun 20 18:18:59 2012] Off-axis axis estimate = 8.59'
[Wed Jun 20 18:40:23 2012] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 18:40:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 18:40:23 2012] Initial guess for spatial extent in simple fitting = 3.26"
[Wed Jun 20 18:40:23 2012] source mask rpix=6.6, npix_max = 203, mask sum = 196, frac = 0.965
[Wed Jun 20 18:40:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.26"
[Wed Jun 20 18:46:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass0_src1.ximg exists
[Wed Jun 20 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12507_pi14-548_cl_pass0_src1.csv
[Wed Jun 20 18:46:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Jun 20 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12507_pi14-548_cl_pass0_src1.csv
[Wed Jun 20 18:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12507_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12507_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 18:46:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 20 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12507_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed Jun 20 18:46:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 20 18:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12507_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed Jun 20 18:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12507_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12507_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 18:56:15 2012] Spatial fit model total counts = 44.784500, observed total counts = 61.000000
[Wed Jun 20 18:56:15 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 18:56:15 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 18:56:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 18:56:15 2012] Assessing source extent using major
[Wed Jun 20 18:56:15 2012] Source does appear to be extended
[Wed Jun 20 18:56:15 2012] Computing asymmetry using major and minor axis, asym = 1.05
[Wed Jun 20 19:14:37 2012] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 19:14:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 19:14:37 2012] Initial guess for spatial extent in simple fitting = 3.26"
[Wed Jun 20 19:14:37 2012] source mask rpix=6.6, npix_max = 203, mask sum = 196, frac = 0.965
[Wed Jun 20 19:14:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.26"
[Wed Jun 20 19:20:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass1_src1.ximg exists
[Wed Jun 20 19:20:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Jun 20 19:20:35 2012] Fit fullrun_ccd3_acisf12507_pi14-548_cl_pass1_src1 appears to have run properly
[Wed Jun 20 19:20:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 20 19:20:35 2012] fullrun_ccd3_acisf12507_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 20 19:20:35 2012] Fit fullrun_ccd3_acisf12507_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 19:28:11 2012] Spatial fit model total counts = 56.869700, observed total counts = 61.000000
[Wed Jun 20 19:28:11 2012] Offset between fit and detection position for source 1 = 1.398971 pixels
[Wed Jun 20 19:28:11 2012] 56.740700 total counts/ 25.358100 bgd. counts: snr = 6.232045
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.398971 pixels
  Position = (592.0, 1076.8) = 16 41 14.93 -46 31 33.2
  Extent = 2.8" x 2.0", rotation angle = 15
  Source counts = 31.4 +/- 7.5
  Background counts = 25.4
  Rate = 0.002 +/- 0.0004
[Wed Jun 20 19:28:11 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 19:28:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 19:28:11 2012] Assessing source extent using major
[Wed Jun 20 19:28:11 2012] Source does appear to be extended
[Wed Jun 20 19:28:11 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Wed Jun 20 19:39:33 2012] Writing source region out to fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1_src.reg
[Wed Jun 20 19:39:33 2012] Extracting stamp from image fullrun_ccd3_acisf12507_pi14-548_cl_sm2.00.img.gz, (462, 947) - (722, 1206)
[Wed Jun 20 19:39:33 2012] Writing fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1.gif
[Wed Jun 20 19:39:35 2012] Size of ../../acisf12507/products/events/fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1_src.evt.gz[events] = 44 counts
[Wed Jun 20 19:39:35 2012] Mean chipx,y = (91.57, 423.43)
[Wed Jun 20 19:39:35 2012] Mean tdetx,y = (4708.57, 3152.57)
[Wed Jun 20 19:39:35 2012] chipx,y range = (65.00-116.00, 392.00-447.00)
[Wed Jun 20 19:39:35 2012] Size of ../../acisf12507/products/events/fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 112 counts
[Wed Jun 20 19:39:36 2012] Not generating rmf since there are only 31 counts
[Wed Jun 20 19:39:36 2012] arf not found, will run specextract
[Wed Jun 20 19:39:59 2012] ../../acisf12507/products/spectra/fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1.warf not found
[Wed Jun 20 19:39:59 2012] ../../acisf12507/products/spectra/fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1.wrmf not found
[Wed Jun 20 19:39:59 2012] Removal of ../../acisf12507/products/spectra/fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1.soff failed
[Wed Jun 20 19:44:18 2012] Spectrum 1 has only 31 counts, deleting rmf
[Wed Jun 20 19:44:18 2012] 162.544
[Wed Jun 20 19:45:17 2012] Updating aperture counts using extracted products
[Wed Jun 20 19:45:17 2012] Error reading totcts from fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Jun 20 19:45:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 19:45:17 2012] Using photon index=1.80, rate=0.00167, arf fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1.arf
[Wed Jun 20 19:45:17 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jun 20 19:45:17 2012] Updating source flux to 3.5e-14
[Wed Jun 20 19:45:22 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jun 20 19:45:22 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 20 19:45:23 2012] acisf12507/analysis//spectral/fullrun_ccd3_acisf12507_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete