[Tue Oct  4 22:36:31 2011] Detection parameters:
  Position = (117.4, 685.2) = 5 9 28.62 -68 42 47.0
  Extent = 0.7" x 0.5", rotation angle = 168 degrees
  Source counts = 16.6 +/- 5.2
  Background counts = 10.4
  Rate = 0.0005 +/- 0.0001

[Tue Oct  4 22:36:34 2011] Off-axis axis estimate = 1.57'
[Tue Oct  4 22:37:57 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 22:37:57 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Oct  4 22:37:57 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.320
[Tue Oct  4 22:37:57 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.40"
[Tue Oct  4 22:37:59 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src33.ximg exists
[Tue Oct  4 22:37:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src33.csv
[Tue Oct  4 22:37:59 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src33_1.ximg exists
[Tue Oct  4 22:37:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src33.csv
[Tue Oct  4 22:37:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:38:00 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Tue Oct  4 22:38:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src33.csv
[Tue Oct  4 22:38:00 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Oct  4 22:38:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src33.csv
[Tue Oct  4 22:38:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:38:14 2011] Spatial fit model total counts = 14.521400, observed total counts = 19.000000
[Tue Oct  4 22:38:14 2011] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Oct  4 22:38:14 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 22:38:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 22:38:14 2011] Assessing source extent using major
[Tue Oct  4 22:38:14 2011] Source does appear to be extended
[Tue Oct  4 22:38:14 2011] Computing asymmetry using major and minor axis, asym = 1.45
[Tue Oct  4 22:38:14 2011] Deleting source due to low Poisson probability 0.6