[Tue Oct  4 22:36:31 2011] Detection parameters:
  Position = (466.1, 942.8) = 5 8 57.15 -68 40 40.3
  Extent = 0.5" x 0.5", rotation angle = 5 degrees
  Source counts = 30.7 +/- 7.1
  Background counts = 19.3
  Rate = 0.0008 +/- 0.0002

[Tue Oct  4 22:36:34 2011] Off-axis axis estimate = 3.15'
[Tue Oct  4 22:37:57 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 22:37:57 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Tue Oct  4 22:37:57 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.321
[Tue Oct  4 22:37:57 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.61"
[Tue Oct  4 22:37:58 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src27.ximg exists
[Tue Oct  4 22:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src27.csv
[Tue Oct  4 22:37:58 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src27_1.ximg exists
[Tue Oct  4 22:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src27.csv
[Tue Oct  4 22:37:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00125_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:38:00 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Tue Oct  4 22:38:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src27.csv
[Tue Oct  4 22:38:00 2011] fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Oct  4 22:38:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src27.csv
[Tue Oct  4 22:38:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00125_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:38:14 2011] Spatial fit model total counts = 19.363500, observed total counts = 22.000000
[Tue Oct  4 22:38:14 2011] Offset between fit and detection position for source 28 = 1.507321 pixels
[Tue Oct  4 22:38:14 2011] 20.185260 total counts/ 0.311660 bgd. counts: snr = 35.598854
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.507321 pixels
  Position = (464.6, 942.8) = 5 8 57.33 -68 40 40.6
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 19.9 +/- 4.5
  Background counts = 0.3
  Rate = 0.0008 +/- 0.0002
[Tue Oct  4 22:38:14 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 22:38:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 22:38:14 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 22:38:14 2011] Source does appear to be extended
[Tue Oct  4 22:38:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 22:38:14 2011] Deleting source due to low Poisson probability 0.6