[Wed May 15 12:15:52 2013] Detection parameters:
  Position = (691.0, 353.0) = 4 27 15.64 -59 49 41.3
  Extent = 0.5" x 0.5", rotation angle = 131 degrees
  Source counts = 10.9 +/- 3.3
  Background counts = 0.1
  Rate = 0.003 +/- 0.001

[Wed May 15 12:15:52 2013] Off-axis axis estimate = 4.34'
[Wed May 15 12:16:39 2013] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Wed May 15 12:16:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 12:16:39 2013] Initial guess for spatial extent in simple fitting = 0.94"
[Wed May 15 12:16:39 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.692
[Wed May 15 12:16:39 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.94"
[Wed May 15 12:19:54 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass0_src2.ximg exists
[Wed May 15 12:19:54 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass0_src2_1.ximg exists
[Wed May 15 12:19:54 2013] Fit fullrun_ccd7_acisf12495_pi14-548_cl_pass0_src2 appears to have run properly
[Wed May 15 12:19:54 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed May 15 12:19:54 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 15 12:19:54 2013] Fit fullrun_ccd7_acisf12495_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May 15 12:19:56 2013] Spatial fit model total counts = 12.925700, observed total counts = 13.000000
[Wed May 15 12:19:56 2013] Offset between fit and detection position for source 7 = 0.796080 pixels
[Wed May 15 12:19:56 2013] 12.557030 total counts/ 2.080630 bgd. counts: snr = 7.262977
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.796080 pixels
  Position = (691.8, 353.2) = 4 27 15.62 -59 49 41.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.5 +/- 3.5
  Background counts = 2.1
  Rate = 0.003 +/- 0.001
[Wed May 15 12:19:56 2013] Vigneting correction estimate = 1.000000
[Wed May 15 12:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 12:19:56 2013] Assessing source extent using major axis lower bound
[Wed May 15 12:19:56 2013] Source does appear to be extended
[Wed May 15 12:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 12:20:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 12:20:03 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed May 15 12:20:03 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Wed May 15 12:20:03 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.38"
[Wed May 15 12:21:57 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass1_src2.ximg exists
[Wed May 15 12:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12495_pi14-548_cl_pass1_src2.csv
[Wed May 15 12:21:57 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass1_src2_1.ximg exists
[Wed May 15 12:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12495_pi14-548_cl_pass1_src2.csv
[Wed May 15 12:21:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12495_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12495_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 12:21:57 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed May 15 12:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12495_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed May 15 12:21:57 2013] fullrun_ccd7_acisf12495_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 15 12:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12495_pi14-548_cl_pass1_tfrozen_src2.csv
[Wed May 15 12:21:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12495_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12495_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 12:21:59 2013] Spatial fit model total counts = 11.304000, observed total counts = 13.000000
[Wed May 15 12:21:59 2013] Offset between fit and detection position for source 7 = 0.014692 pixels
[Wed May 15 12:21:59 2013] 10.769069 total counts/ 0.847229 bgd. counts: snr = 10.779331
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.014692 pixels
  Position = (691.8, 353.2) = 4 27 15.62 -59 49 41.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 9.9 +/- 3.3
  Background counts = 0.8
  Rate = 0.003 +/- 0.001
[Wed May 15 12:21:59 2013] Vigneting correction estimate = 1.000000
[Wed May 15 12:21:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 12:21:59 2013] Assessing source extent using major axis lower bound
[Wed May 15 12:21:59 2013] Source does appear to be extended
[Wed May 15 12:21:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 12:23:30 2013] Writing source region out to fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7_src.reg
[Wed May 15 12:23:30 2013] Extracting stamp from image fullrun_ccd7_acisf12495_pi14-548_cl_sm2.00.img.gz, (674, 335) - (710, 371)
[Wed May 15 12:23:30 2013] Writing fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7.gif
[Wed May 15 12:23:47 2013] Size of ../../acisf12495/products/events/fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7_src.evt.gz[events] = 10 counts
[Wed May 15 12:23:47 2013] Mean chipx,y = (695.70, 354.10)
[Wed May 15 12:23:47 2013] Mean tdetx,y = (4612.70, 2056.10)
[Wed May 15 12:23:47 2013] chipx,y range = (681.00-712.00, 338.00-370.00)
[Wed May 15 12:23:47 2013] Size of ../../acisf12495/products/events/fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 3 counts
[Wed May 15 12:23:48 2013] Not generating rmf since there are only 9 counts
[Wed May 15 12:23:48 2013] arf not found, will run specextract
[Wed May 15 12:23:56 2013] ../../acisf12495/products/spectra/fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7.warf not found
[Wed May 15 12:23:56 2013] ../../acisf12495/products/spectra/fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7.wrmf not found
[Wed May 15 12:23:56 2013] Removal of ../../acisf12495/products/spectra/fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7.soff failed
[Wed May 15 12:24:36 2013] Spectrum 7 has only 10 counts, deleting rmf
[Wed May 15 12:24:36 2013] 222.741
[Wed May 15 12:24:37 2013] Updating aperture counts using extracted products
[Wed May 15 12:24:37 2013] Total counts from fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7_src.pi.gz = 10.00
[Wed May 15 12:24:37 2013] Total counts from fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7_bgd.pi.gz = 3.00
[Wed May 15 12:24:37 2013] Got source and background scale factors 0.000000, 0.000006
[Wed May 15 12:24:37 2013] User source parameters:
  Position = (691.8, 353.2) = 4 27 15.62 -59 49 41.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 9.7 +/- 4.3
  Background aperture counts = 0.3
  Rate = 0.003 +/- 0.001

[Wed May 15 12:24:37 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 12:24:37 2013] Using photon index=1.80, rate=0.0031, arf fullrun_ccd7_acisf12495_pi14-548_pass1_cl_src7.arf
[Wed May 15 12:24:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 15 12:24:37 2013] Updating source flux to 2.4e-14
[Wed May 15 12:24:41 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting