[Sat Jun  1 16:51:45 2013] Detection parameters:
  Position = (326.9, 687.8) = 12 58 49.96 34 52 31.8
  Extent = 0.5" x 0.5", rotation angle = 100 degrees
  Source counts = 23.8 +/- 4.9
  Background counts = 0.2
  Rate = 0.001 +/- 0.0002

[Sat Jun  1 16:51:45 2013] Off-axis axis estimate = 3.12'
[Sat Jun  1 17:34:46 2013] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:34:46 2013] Initial guess for spatial extent in simple fitting = 0.60"
[Sat Jun  1 17:34:46 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.005
[Sat Jun  1 17:34:46 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.60"
[Sat Jun  1 17:53:04 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass0_src2.ximg exists
[Sat Jun  1 17:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12473_pi14-548_cl_pass0_src2.csv
[Sat Jun  1 17:53:04 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Jun  1 17:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12473_pi14-548_cl_pass0_src2.csv
[Sat Jun  1 17:53:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12473_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12473_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:04 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun  1 17:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12473_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Jun  1 17:53:04 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun  1 17:53:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12473_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Jun  1 17:53:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12473_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12473_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 18:15:34 2013] Spatial fit model total counts = 23.910500, observed total counts = 26.000000
[Sat Jun  1 18:15:34 2013] Offset between fit and detection position for source 10 = 0.728566 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.728566 pixels
  Position = (327.4, 688.3) = 12 58 49.96 34 52 31.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 23.2 +/- 4.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Jun  1 18:15:34 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 18:15:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 18:15:34 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 18:15:34 2013] Source does appear to be extended
[Sat Jun  1 18:15:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 18:44:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  1 18:44:56 2013] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Jun  1 18:44:56 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.320
[Sat Jun  1 18:44:56 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.40"
[Sat Jun  1 19:08:09 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass1_src2.ximg exists
[Sat Jun  1 19:08:09 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Jun  1 19:08:09 2013] Fit fullrun_ccd3_acisf12473_pi14-548_cl_pass1_src2 appears to have run properly
[Sat Jun  1 19:08:09 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  1 19:08:09 2013] fullrun_ccd3_acisf12473_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  1 19:08:09 2013] Fit fullrun_ccd3_acisf12473_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun  1 19:25:06 2013] Spatial fit model total counts = 24.307300, observed total counts = 26.000000
[Sat Jun  1 19:25:06 2013] Offset between fit and detection position for source 10 = 0.019116 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.019116 pixels
  Position = (327.4, 688.2) = 12 58 49.96 34 52 31.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 23.7 +/- 4.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Jun  1 19:25:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 19:25:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 19:25:06 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 19:25:06 2013] Source does appear to be extended
[Sat Jun  1 19:25:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 19:44:57 2013] Writing source region out to fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10_src.reg
[Sat Jun  1 19:44:57 2013] Extracting stamp from image fullrun_ccd3_acisf12473_pi14-548_cl_sm2.00.img.gz, (310, 671) - (345, 706)
[Sat Jun  1 19:44:57 2013] Writing fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10.gif
[Sat Jun  1 19:45:41 2013] Size of ../../acisf12473/products/events/fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10_src.evt.gz[events] = 24 counts
[Sat Jun  1 19:45:41 2013] Mean chipx,y = (822.96, 660.62)
[Sat Jun  1 19:45:41 2013] Mean tdetx,y = (4471.38, 3883.96)
[Sat Jun  1 19:45:41 2013] chipx,y range = (803.00-837.00, 645.00-679.00)
[Sat Jun  1 19:45:41 2013] Size of ../../acisf12473/products/events/fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 3 counts
[Sat Jun  1 19:45:43 2013] Not generating rmf since there are only 23 counts
[Sat Jun  1 19:45:43 2013] arf not found, will run specextract
[Sat Jun  1 19:46:09 2013] ../../acisf12473/products/spectra/fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10.warf not found
[Sat Jun  1 19:46:09 2013] ../../acisf12473/products/spectra/fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10.wrmf not found
[Sat Jun  1 19:46:09 2013] Removal of ../../acisf12473/products/spectra/fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10.soff failed
[Sat Jun  1 19:49:34 2013] Spectrum 10 has only 24 counts, deleting rmf
[Sat Jun  1 19:49:34 2013] 196.176
[Sat Jun  1 19:50:37 2013] Updating aperture counts using extracted products
[Sat Jun  1 19:50:37 2013] Total counts from fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10_src.pi.gz = 24.00
[Sat Jun  1 19:50:37 2013] Total counts from fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10_bgd.pi.gz = 3.00
[Sat Jun  1 19:50:37 2013] Got source and background scale factors 0.000000, 0.000005
[Sat Jun  1 19:50:37 2013] User source parameters:
  Position = (327.4, 688.2) = 12 58 49.96 34 52 31.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 23.7 +/- 6.0
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0003

[Sat Jun  1 19:50:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 19:50:38 2013] Using photon index=1.80, rate=0.0012, arf fullrun_ccd3_acisf12473_pi14-548_pass1_cl_src10.arf
[Sat Jun  1 19:50:38 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun  1 19:50:38 2013] Updating source flux to 1.5e-14
[Sat Jun  1 19:50:45 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting