[Fri Feb 24 05:14:44 2012] Detection parameters:
  Position = (358.7, 375.9) = 16 12 50.28 -52 24 4.4
  Extent = 0.7" x 0.5", rotation angle = 41 degrees
  Source counts = 34.3 +/- 6.1
  Background counts = 2.7
  Rate = 0.001 +/- 0.0003

[Fri Feb 24 05:14:44 2012] Off-axis axis estimate = 1.95'
[Fri Feb 24 05:15:55 2012] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 05:15:55 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Feb 24 05:15:55 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.806
[Fri Feb 24 05:15:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.43"
[Fri Feb 24 05:18:18 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 24 05:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12470_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 05:18:18 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 24 05:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12470_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 05:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12470_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12470_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 05:18:18 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 05:18:18 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 05:18:18 2012] Fit fullrun_ccd7_acisf12470_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 05:18:20 2012] Spatial fit model total counts = 42.063500, observed total counts = 42.000000
[Fri Feb 24 05:18:20 2012] Offset between fit and detection position for source 1 = 0.292847 pixels
[Fri Feb 24 05:18:20 2012] 41.933300 total counts/ 11.528000 bgd. counts: snr = 8.955139
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.292847 pixels
  Position = (359.0, 376.1) = 16 12 50.29 -52 24 4.5
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 30.4 +/- 6.5
  Background counts = 11.5
  Rate = 0.001 +/- 0.0003
[Fri Feb 24 05:18:20 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 05:18:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 05:18:20 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 05:18:20 2012] Source does appear to be extended
[Fri Feb 24 05:18:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 05:18:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 05:18:28 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Feb 24 05:18:28 2012] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.519
[Fri Feb 24 05:18:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.44"
[Fri Feb 24 05:20:50 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 24 05:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12470_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 05:20:50 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 24 05:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12470_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 05:20:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12470_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12470_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 05:20:50 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 05:20:50 2012] fullrun_ccd7_acisf12470_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 05:20:50 2012] Fit fullrun_ccd7_acisf12470_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 05:20:52 2012] Spatial fit model total counts = 41.999700, observed total counts = 42.000000
[Fri Feb 24 05:20:52 2012] Offset between fit and detection position for source 1 = 0.002710 pixels
[Fri Feb 24 05:20:52 2012] 41.872400 total counts/ 11.580300 bgd. counts: snr = 8.901629
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002710 pixels
  Position = (359.0, 376.1) = 16 12 50.29 -52 24 4.5
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 30.3 +/- 6.5
  Background counts = 11.6
  Rate = 0.001 +/- 0.0003
[Fri Feb 24 05:20:52 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 05:20:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 05:20:52 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 05:20:52 2012] Source does appear to be extended
[Fri Feb 24 05:20:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 05:21:00 2012] Writing source region out to fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1_src.reg
[Fri Feb 24 05:21:00 2012] Extracting stamp from image fullrun_ccd7_acisf12470_pi14-548_cl_sm2.00.img.gz, (339, 356) - (379, 396)
[Fri Feb 24 05:21:00 2012] Writing fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1.gif
[Fri Feb 24 05:21:01 2012] Size of ../../acisf12470/products/events/fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1_src.evt.gz[events] = 34 counts
[Fri Feb 24 05:21:01 2012] Mean chipx,y = (423.21, 482.62)
[Fri Feb 24 05:21:01 2012] Mean tdetx,y = (4340.21, 2184.62)
[Fri Feb 24 05:21:01 2012] chipx,y range = (405.00-441.00, 465.00-500.00)
[Fri Feb 24 05:21:01 2012] Size of ../../acisf12470/products/events/fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 16 counts
[Fri Feb 24 05:21:02 2012] Not generating rmf since there are only 30 counts
[Fri Feb 24 05:21:02 2012] arf not found, will run specextract
[Fri Feb 24 05:21:10 2012] ../../acisf12470/products/spectra/fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1.warf not found
[Fri Feb 24 05:21:10 2012] ../../acisf12470/products/spectra/fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1.wrmf not found
[Fri Feb 24 05:21:10 2012] Removal of ../../acisf12470/products/spectra/fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1.soff failed
[Fri Feb 24 05:21:51 2012] Spectrum 1 has only 30 counts, deleting rmf
[Fri Feb 24 05:21:51 2012] 232.396
[Fri Feb 24 05:21:52 2012] Updating aperture counts using extracted products
[Fri Feb 24 05:21:52 2012] Error reading totcts from fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Feb 24 05:21:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 05:21:52 2012] Using photon index=1.80, rate=0.00128, arf fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1.arf
[Fri Feb 24 05:21:52 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 05:21:53 2012] Updating source flux to 1.9e-14
[Fri Feb 24 05:21:57 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 24 05:22:00 2012] acisf12470/analysis//spectral/fullrun_ccd7_acisf12470_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete