[Thu May  2 17:00:40 2013] Detection parameters:
  Position = (1119.0, 996.7) = 18 5 21.78 -30 1 33.3
  Extent = 0.8" x 0.5", rotation angle = 55 degrees
  Source counts = 13.0 +/- 4.1
  Background counts = 4.0
  Rate = 0.0002 +/- 8e-05

[Thu May  2 17:00:40 2013] Off-axis axis estimate = 7.27'
[Thu May  2 17:04:25 2013] Using EEF radius (= 2.35 ")to estimate initial spatial extent for simple fitting
[Thu May  2 17:04:25 2013] Initial guess for spatial extent in simple fitting = 2.35"
[Thu May  2 17:04:25 2013] source mask rpix=4.8, npix_max = 111, mask sum = 77, frac = 0.693
[Thu May  2 17:04:25 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 2.35"
[Thu May  2 18:14:40 2013] fullrun_ccd3_acisf12400_pi14-548_cl_pass0_src2.ximg exists
[Thu May  2 18:14:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12400_pi14-548_cl_pass0_src2.csv
[Thu May  2 18:14:40 2013] fullrun_ccd3_acisf12400_pi14-548_cl_pass0_src2_1.ximg exists
[Thu May  2 18:14:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12400_pi14-548_cl_pass0_src2.csv
[Thu May  2 18:14:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12400_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12400_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 18:14:40 2013] fullrun_ccd3_acisf12400_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu May  2 18:14:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12400_pi14-548_cl_pass0_tfrozen_src2.csv
[Thu May  2 18:14:40 2013] fullrun_ccd3_acisf12400_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May  2 18:14:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12400_pi14-548_cl_pass0_tfrozen_src2.csv
[Thu May  2 18:14:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12400_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12400_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 19:35:36 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 27.956872 pixels away
[Thu May  2 19:35:36 2013] Vigneting correction estimate = 1.000000
[Thu May  2 19:35:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 19:35:36 2013] Assessing source extent using major
[Thu May  2 19:35:36 2013] Source does appear to be extended
[Thu May  2 19:35:36 2013] Computing asymmetry using major and minor axis, asym = 1.67
[Thu May  2 19:35:36 2013] Source is asymmetric
[Thu May  2 19:35:36 2013] Deleting source due to low Poisson probability 0.9