[Wed May 1 06:07:31 2013] Detection parameters: Position = (95.8, 840.6) = 19 12 26.95 49 50 34.3 Extent = 0.6" x 0.5", rotation angle = 36 degrees Source counts = 18.7 +/- 4.5 Background counts = 1.3 Rate = 0.0009 +/- 0.0002 [Wed May 1 06:07:31 2013] Off-axis axis estimate = 3.66' [Wed May 1 06:46:58 2013] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:46:58 2013] Initial guess for spatial extent in simple fitting = 0.73" [Wed May 1 06:46:58 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.008 [Wed May 1 06:46:58 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.73" [Wed May 1 07:00:21 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass0_src8.ximg exists [Wed May 1 07:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass0_src8.csv [Wed May 1 07:00:21 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass0_src8_1.ximg exists [Wed May 1 07:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass0_src8.csv [Wed May 1 07:00:21 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf12398_pi14-548_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf12398_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 07:00:21 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass0_tfrozen_src8.ximg exists [Wed May 1 07:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass0_tfrozen_src8.csv [Wed May 1 07:00:21 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists [Wed May 1 07:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass0_tfrozen_src8.csv [Wed May 1 07:00:21 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf12398_pi14-548_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf12398_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 07:00:27 2013] Source 6 is offset by -1.529300 and -1.045808 pixels which is larger than 2 X fitted extent = 1.452499 x 1.452499, not incorporating fit results [Wed May 1 07:00:27 2013] Vigneting correction estimate = 1.000000 [Wed May 1 07:00:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 07:00:27 2013] Assessing source extent using major [Wed May 1 07:00:27 2013] Source does appear to be extended [Wed May 1 07:00:27 2013] Computing asymmetry using major and minor axis, asym = 1.30 [Wed May 1 07:36:49 2013] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting [Wed May 1 07:36:49 2013] Initial guess for spatial extent in simple fitting = 0.73" [Wed May 1 07:36:49 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.008 [Wed May 1 07:36:49 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.73" [Wed May 1 07:50:23 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass1_src8.ximg exists [Wed May 1 07:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass1_src8.csv [Wed May 1 07:50:23 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass1_src8_1.ximg exists [Wed May 1 07:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass1_src8.csv [Wed May 1 07:50:23 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf12398_pi14-548_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf12398_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 07:50:23 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass1_tfrozen_src8.ximg exists [Wed May 1 07:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass1_tfrozen_src8.csv [Wed May 1 07:50:23 2013] fullrun_ccd7_acisf12398_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists [Wed May 1 07:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12398_pi14-548_cl_pass1_tfrozen_src8.csv [Wed May 1 07:50:23 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf12398_pi14-548_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf12398_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 07:50:29 2013] Source 6 is offset by -1.529300 and -1.045808 pixels which is larger than 2 X fitted extent = 1.452499 x 1.452499, not incorporating fit results [Wed May 1 07:50:29 2013] Vigneting correction estimate = 1.000000 [Wed May 1 07:50:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 07:50:29 2013] Assessing source extent using major [Wed May 1 07:50:29 2013] Source does appear to be extended [Wed May 1 07:50:29 2013] Computing asymmetry using major and minor axis, asym = 1.30 [Wed May 1 08:00:20 2013] Writing source region out to fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6_src.reg [Wed May 1 08:00:20 2013] Extracting stamp from image fullrun_ccd7_acisf12398_pi14-548_cl_sm2.00.img.gz, (67, 811) - (125, 870) [Wed May 1 08:00:20 2013] Writing fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6.gif [Wed May 1 08:02:22 2013] Size of ../../acisf12398/products/events/fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6_src.evt.gz[events] = 19 counts [Wed May 1 08:02:22 2013] Mean chipx,y = (23.63, 912.00) [Wed May 1 08:02:22 2013] Mean tdetx,y = (3940.63, 2614.00) [Wed May 1 08:02:22 2013] chipx,y range = (6.00-40.00, 893.00-932.00) [Wed May 1 08:02:22 2013] Size of ../../acisf12398/products/events/fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 16 counts [Wed May 1 08:02:23 2013] Not generating rmf since there are only 18 counts [Wed May 1 08:02:23 2013] arf not found, will run specextract [Wed May 1 08:02:31 2013] ../../acisf12398/products/spectra/fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6.warf not found [Wed May 1 08:02:31 2013] ../../acisf12398/products/spectra/fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6.wrmf not found [Wed May 1 08:02:31 2013] Removal of ../../acisf12398/products/spectra/fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6.soff failed [Wed May 1 08:05:56 2013] Spectrum 6 has only 19 counts, deleting rmf [Wed May 1 08:05:56 2013] 212.184 [Wed May 1 08:06:01 2013] Updating aperture counts using extracted products [Wed May 1 08:06:01 2013] Total counts from fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6_src.pi.gz = 19.00 [Wed May 1 08:06:01 2013] Total counts from fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6_bgd.pi.gz = 16.00 [Wed May 1 08:06:01 2013] Got source and background scale factors 0.000001, 0.000015 [Wed May 1 08:06:01 2013] User source parameters: Position = (95.8, 840.6) = 19 12 26.95 49 50 34.3 Extent = 0.6" x 0.5", rotation angle = 36 Source aperture counts = 18.0 +/- 5.4 Background aperture counts = 1.0 Rate = 0.0009 +/- 0.0003 [Wed May 1 08:06:01 2013] Updating counts from extracted products [Wed May 1 08:06:01 2013] Set source signif. to 17.96/1.02 = 17.59 [Wed May 1 08:06:03 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 08:06:03 2013] Using photon index=1.80, rate=0.000907, arf fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6.arf [Wed May 1 08:06:03 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 1 08:06:03 2013] Updating source flux to 7.7e-15 [Wed May 1 08:06:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 08:06:12 2013] acisf12398/analysis//spectral/fullrun_ccd7_acisf12398_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete