[Sat Feb 11 04:46:20 2012] Detection parameters:
  Position = (45.5, 399.9) = 6 10 50.80 -6 11 39.5
  Extent = 0.5" x 0.5", rotation angle = 148 degrees
  Source counts = 130.9 +/- 11.7
  Background counts = 6.1
  Rate = 0.002 +/- 0.0002

[Sat Feb 11 04:46:23 2012] Off-axis axis estimate = 0.20'
[Sat Feb 11 06:48:53 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 06:48:53 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Feb 11 06:48:53 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.839
[Sat Feb 11 06:48:53 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.41"
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_src9.ximg exists
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_src9_1.ximg exists
[Sat Feb 11 08:05:04 2012] Fit fullrun_ccd3_acisf12392_pi14-548_cl_pass0_src9 appears to have run properly
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Feb 11 08:05:04 2012] Fit fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Feb 11 08:30:04 2012] Spatial fit model total counts = 184.327000, observed total counts = 186.000000
[Sat Feb 11 08:30:04 2012] Offset between fit and detection position for source 6 = 0.724100 pixels
[Sat Feb 11 08:30:04 2012] 181.625900 total counts/ 58.701900 bgd. counts: snr = 16.043924
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.724100 pixels
  Position = (46.0, 400.4) = 6 10 50.80 -6 11 39.5
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 122.9 +/- 13.5
  Background counts = 58.7
  Rate = 0.002 +/- 0.0002
[Sat Feb 11 08:30:04 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 08:30:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 08:30:04 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 08:30:04 2012] Source does appear to be extended
[Sat Feb 11 08:30:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 10:20:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 10:20:12 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Feb 11 10:20:12 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.904
[Sat Feb 11 10:20:12 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.39"
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src9.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src9.csv
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src9_1.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src9.csv
[Sat Feb 11 11:42:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src9.csv
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src9.csv
[Sat Feb 11 11:42:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 12:00:46 2012] Spatial fit model total counts = 140.168000, observed total counts = 186.000000
[Sat Feb 11 12:00:46 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Feb 11 12:00:46 2012] Spatial fit model total counts = 210.825000, observed total counts = 211.000000
[Sat Feb 11 12:00:46 2012] Offset between fit and detection position for source 6 = 1.081969 pixels
[Sat Feb 11 12:00:46 2012] Warning, changing simple spatial fit ID from 9 to 30
[Sat Feb 11 12:00:46 2012] 205.851800 total counts/ 74.126800 bgd. counts: snr = 15.299618
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.081969 pixels
  Position = (46.1, 399.3) = 6 10 50.80 -6 11 40.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 131.7 +/- 14.3
  Background counts = 74.1
  Rate = 0.002 +/- 0.0002
[Sat Feb 11 12:00:46 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 12:00:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 12:00:46 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 12:00:46 2012] Source does appear to be extended
[Sat Feb 11 12:00:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:57:47 2012] Writing source region out to fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6_src.reg
[Sat Feb 11 12:57:47 2012] Extracting stamp from image fullrun_ccd3_acisf12392_pi14-548_cl_sm2.00.img.gz, (20, 373) - (72, 425)
[Sat Feb 11 12:57:47 2012] Writing fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6.gif
[Sat Feb 11 13:02:54 2012] Size of ../../acisf12392/products/events/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6_src.evt.gz[events] = 153 counts
[Sat Feb 11 13:02:54 2012] Mean chipx,y = (938.71, 1005.13)
[Sat Feb 11 13:02:54 2012] Mean tdetx,y = (4126.87, 3999.71)
[Sat Feb 11 13:02:54 2012] chipx,y range = (920.00-958.00, 987.00-1022.00)
[Sat Feb 11 13:02:54 2012] Size of ../../acisf12392/products/events/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 18 counts
[Sat Feb 11 13:02:55 2012] rmf not found, will run specextract
[Sat Feb 11 13:02:55 2012] arf not found, will run specextract
[Sat Feb 11 13:03:32 2012] ../../acisf12392/products/spectra/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6.warf not found
[Sat Feb 11 13:03:32 2012] ../../acisf12392/products/spectra/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6.wrmf not found
[Sat Feb 11 13:03:32 2012] Removal of ../../acisf12392/products/spectra/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6.soff failed
[Sat Feb 11 13:35:27 2012] Keeping rmf generated by specextract
[Sat Feb 11 13:35:27 2012] 172.174
[Sat Feb 11 13:36:26 2012] Updating aperture counts using extracted products
[Sat Feb 11 13:36:26 2012] Error reading totcts from fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Feb 11 13:36:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 13:36:27 2012] Using photon index=1.80, rate=0.00196, arf fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src6.arf
[Sat Feb 11 13:36:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 13:36:27 2012] Updating source flux to 2.6e-14
[Sat Feb 11 13:36:53 2012] Flag p found in src. 6 procflags, skipping spectral fitting