[Sat Feb 11 04:46:21 2012] Detection parameters:
  Position = (443.8, 506.7) = 6 10 37.66 -6 10 46.9
  Extent = 0.5" x 0.5", rotation angle = 98 degrees
  Source counts = 35.6 +/- 6.1
  Background counts = 1.4
  Rate = 0.0005 +/- 9e-05

[Sat Feb 11 04:46:23 2012] Off-axis axis estimate = 3.58'
[Sat Feb 11 06:48:53 2012] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 06:48:53 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Feb 11 06:48:53 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.052
[Sat Feb 11 06:48:53 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 0.71"
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_src28.ximg exists
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_src28_1.ximg exists
[Sat Feb 11 08:05:04 2012] Fit fullrun_ccd3_acisf12392_pi14-548_cl_pass0_src28 appears to have run properly
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Sat Feb 11 08:05:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src28.csv
[Sat Feb 11 08:05:04 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Feb 11 08:05:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src28.csv
[Sat Feb 11 08:05:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12392_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 08:30:04 2012] Spatial fit model total counts = 38.200300, observed total counts = 44.000000
[Sat Feb 11 08:30:04 2012] Offset between fit and detection position for source 35 = 0.626706 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.626706 pixels
  Position = (444.1, 507.2) = 6 10 37.66 -6 10 46.9
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 38.4 +/- 6.2
  Background counts = 0.0
  Rate = 0.0006 +/- 9e-05
[Sat Feb 11 08:30:04 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 08:30:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 08:30:04 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 08:30:04 2012] Source does appear to be extended
[Sat Feb 11 08:30:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 10:20:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 10:20:12 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Feb 11 10:20:12 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.196
[Sat Feb 11 10:20:12 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 0.65"
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src28.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src28.csv
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src28_1.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src28.csv
[Sat Feb 11 11:42:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12392_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src28.csv
[Sat Feb 11 11:42:24 2012] fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Feb 11 11:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src28.csv
[Sat Feb 11 11:42:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12392_pi14-548_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 12:00:46 2012] Spatial fit model total counts = 39.691300, observed total counts = 44.000000
[Sat Feb 11 12:00:46 2012] Offset between fit and detection position for source 35 = 0.081567 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.081567 pixels
  Position = (444.2, 507.3) = 6 10 37.66 -6 10 46.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 39.9 +/- 6.3
  Background counts = 0.0
  Rate = 0.0006 +/- 9e-05
[Sat Feb 11 12:00:46 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 12:00:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 12:00:46 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 12:00:46 2012] Source does appear to be extended
[Sat Feb 11 12:00:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:57:47 2012] Writing source region out to fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35_src.reg
[Sat Feb 11 12:57:47 2012] Extracting stamp from image fullrun_ccd3_acisf12392_pi14-548_cl_sm2.00.img.gz, (414, 477) - (474, 537)
[Sat Feb 11 12:57:47 2012] Writing fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35.gif
[Sat Feb 11 13:14:48 2012] Size of ../../acisf12392/products/events/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35_src.evt.gz[events] = 40 counts
[Sat Feb 11 13:14:48 2012] Mean chipx,y = (709.27, 666.75)
[Sat Feb 11 13:14:48 2012] Mean tdetx,y = (4465.25, 3770.28)
[Sat Feb 11 13:14:48 2012] chipx,y range = (693.00-728.00, 646.00-680.00)
[Sat Feb 11 13:14:48 2012] Size of ../../acisf12392/products/events/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 14 counts
[Sat Feb 11 13:14:49 2012] Not generating rmf since there are only 39 counts
[Sat Feb 11 13:14:49 2012] arf not found, will run specextract
[Sat Feb 11 13:15:21 2012] ../../acisf12392/products/spectra/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35.warf not found
[Sat Feb 11 13:15:21 2012] ../../acisf12392/products/spectra/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35.wrmf not found
[Sat Feb 11 13:15:21 2012] Removal of ../../acisf12392/products/spectra/fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35.soff failed
[Sat Feb 11 13:35:27 2012] Spectrum 35 has only 40 counts, deleting rmf
[Sat Feb 11 13:35:27 2012] 192.786
[Sat Feb 11 13:36:27 2012] Updating aperture counts using extracted products
[Sat Feb 11 13:36:27 2012] Error reading totcts from fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35_src.pi.gz
[Sat Feb 11 13:36:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 13:36:27 2012] Using photon index=1.80, rate=0.000592, arf fullrun_ccd3_acisf12392_pi14-548_pass1_cl_src35.arf
[Sat Feb 11 13:36:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 13:36:27 2012] Updating source flux to 7e-15
[Sat Feb 11 13:36:53 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting