[Sat Feb 11 04:46:13 2012] Detection parameters:
  Position = (533.0, 927.6) = 6 10 45.34 -6 15 26.5
  Extent = 0.8" x 0.5", rotation angle = 105 degrees
  Source counts = 31.4 +/- 5.7
  Background counts = 1.6
  Rate = 0.0005 +/- 9e-05

[Sat Feb 11 04:46:15 2012] Off-axis axis estimate = 4.04'
[Sat Feb 11 05:19:04 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 05:19:04 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Sat Feb 11 05:19:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.025
[Sat Feb 11 05:19:04 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.84"
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src12.ximg exists
[Sat Feb 11 05:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src12.csv
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Feb 11 05:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src12.csv
[Sat Feb 11 05:56:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Feb 11 05:56:28 2012] Fit fullrun_ccd1_acisf12392_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Feb 11 08:29:53 2012] Spatial fit model total counts = 39.949600, observed total counts = 38.000000
[Sat Feb 11 08:29:53 2012] Offset between fit and detection position for source 9 = 0.761275 pixels
[Sat Feb 11 08:29:53 2012] 40.448400 total counts/ 10.954000 bgd. counts: snr = 8.911549
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.761275 pixels
  Position = (533.4, 928.2) = 6 10 45.34 -6 15 26.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 29.5 +/- 6.4
  Background counts = 11.0
  Rate = 0.0004 +/- 9e-05
[Sat Feb 11 08:29:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 08:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 08:29:53 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 08:29:53 2012] Source does appear to be extended
[Sat Feb 11 08:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 08:54:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 08:54:45 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Feb 11 08:54:45 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.902
[Sat Feb 11 08:54:45 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.65"
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src12.ximg exists
[Sat Feb 11 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src12.csv
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Feb 11 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src12.csv
[Sat Feb 11 09:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 11 09:30:05 2012] Fit fullrun_ccd1_acisf12392_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Feb 11 12:00:35 2012] Spatial fit model total counts = 37.605900, observed total counts = 36.000000
[Sat Feb 11 12:00:35 2012] Offset between fit and detection position for source 9 = 0.048578 pixels
[Sat Feb 11 12:00:35 2012] 37.490360 total counts/ 6.762660 bgd. counts: snr = 11.816022
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.048578 pixels
  Position = (533.4, 928.3) = 6 10 45.34 -6 15 26.4
  Extent = 0.6 (0.6-0.8)", rotation angle = 0
  Source counts = 30.7 +/- 6.1
  Background counts = 6.8
  Rate = 0.0005 +/- 9e-05
[Sat Feb 11 12:00:35 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 12:00:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 12:00:35 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 12:00:35 2012] Source does appear to be extended
[Sat Feb 11 12:00:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:14:18 2012] Writing source region out to fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9_src.reg
[Sat Feb 11 12:14:18 2012] Extracting stamp from image fullrun_ccd1_acisf12392_pi14-548_cl_sm2.00.img.gz, (504, 899) - (563, 958)
[Sat Feb 11 12:14:18 2012] Writing fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9.gif
[Sat Feb 11 12:19:51 2012] Size of ../../acisf12392/products/events/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9_src.evt.gz[events] = 32 counts
[Sat Feb 11 12:19:51 2012] Mean chipx,y = (275.75, 706.78)
[Sat Feb 11 12:19:51 2012] Mean tdetx,y = (4425.22, 4382.75)
[Sat Feb 11 12:19:51 2012] chipx,y range = (260.00-296.00, 689.00-724.00)
[Sat Feb 11 12:19:51 2012] Size of ../../acisf12392/products/events/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 14 counts
[Sat Feb 11 12:19:52 2012] Not generating rmf since there are only 30 counts
[Sat Feb 11 12:19:52 2012] arf not found, will run specextract
[Sat Feb 11 12:20:21 2012] ../../acisf12392/products/spectra/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9.warf not found
[Sat Feb 11 12:20:21 2012] ../../acisf12392/products/spectra/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9.wrmf not found
[Sat Feb 11 12:20:21 2012] Removal of ../../acisf12392/products/spectra/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9.soff failed
[Sat Feb 11 12:30:58 2012] Spectrum 9 has only 31 counts, deleting rmf
[Sat Feb 11 12:30:58 2012] 196.294
[Sat Feb 11 13:36:25 2012] Updating aperture counts using extracted products
[Sat Feb 11 13:36:25 2012] Error reading totcts from fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9_src.pi.gz
[Sat Feb 11 13:36:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 13:36:25 2012] Using photon index=1.80, rate=0.000456, arf fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9.arf
[Sat Feb 11 13:36:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 13:36:25 2012] Updating source flux to 5.3e-15
[Sat Feb 11 13:36:39 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 11 13:36:40 2012] acisf12392/analysis//spectral/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete