[Sat Feb 11 04:46:13 2012] Detection parameters:
  Position = (189.5, 803.4) = 6 10 56.67 -6 16 27.6
  Extent = 0.7" x 0.5", rotation angle = 71 degrees
  Source counts = 33.0 +/- 5.9
  Background counts = 2.0
  Rate = 0.0005 +/- 9e-05

[Sat Feb 11 04:46:15 2012] Off-axis axis estimate = 4.91'
[Sat Feb 11 05:19:04 2012] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 05:19:04 2012] Initial guess for spatial extent in simple fitting = 1.14"
[Sat Feb 11 05:19:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.782
[Sat Feb 11 05:19:04 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 1.14"
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src10.ximg exists
[Sat Feb 11 05:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src10.csv
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Feb 11 05:56:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src10.csv
[Sat Feb 11 05:56:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12392_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Feb 11 05:56:28 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Feb 11 05:56:28 2012] Fit fullrun_ccd1_acisf12392_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Feb 11 08:29:53 2012] Spatial fit model total counts = 38.049900, observed total counts = 40.000000
[Sat Feb 11 08:29:53 2012] Offset between fit and detection position for source 7 = 0.689644 pixels
[Sat Feb 11 08:29:53 2012] 36.381500 total counts/ 2.016600 bgd. counts: snr = 24.199434
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.689644 pixels
  Position = (189.9, 803.9) = 6 10 56.68 -6 16 27.6
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 34.4 +/- 6.0
  Background counts = 2.0
  Rate = 0.0005 +/- 9e-05
[Sat Feb 11 08:29:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 08:29:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 08:29:53 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 08:29:53 2012] Source does appear to be extended
[Sat Feb 11 08:29:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 08:54:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 08:54:45 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Sat Feb 11 08:54:45 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.787
[Sat Feb 11 08:54:45 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.86"
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src10.ximg exists
[Sat Feb 11 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src10.csv
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Feb 11 09:30:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src10.csv
[Sat Feb 11 09:30:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12392_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Feb 11 09:30:05 2012] fullrun_ccd1_acisf12392_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Feb 11 09:30:05 2012] Fit fullrun_ccd1_acisf12392_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Feb 11 12:00:35 2012] Spatial fit model total counts = 39.380300, observed total counts = 40.000000
[Sat Feb 11 12:00:35 2012] Offset between fit and detection position for source 7 = 0.148915 pixels
[Sat Feb 11 12:00:35 2012] 38.251850 total counts/ 7.835350 bgd. counts: snr = 10.866259
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.148915 pixels
  Position = (190.0, 803.9) = 6 10 56.67 -6 16 27.6
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 30.4 +/- 6.2
  Background counts = 7.8
  Rate = 0.0005 +/- 9e-05
[Sat Feb 11 12:00:35 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 12:00:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 12:00:35 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 12:00:35 2012] Source does appear to be extended
[Sat Feb 11 12:00:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 12:14:18 2012] Writing source region out to fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7_src.reg
[Sat Feb 11 12:14:18 2012] Extracting stamp from image fullrun_ccd1_acisf12392_pi14-548_cl_sm2.00.img.gz, (156, 770) - (224, 838)
[Sat Feb 11 12:14:18 2012] Writing fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7.gif
[Sat Feb 11 12:18:39 2012] Size of ../../acisf12392/products/events/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7_src.evt.gz[events] = 36 counts
[Sat Feb 11 12:18:39 2012] Mean chipx,y = (503.14, 993.03)
[Sat Feb 11 12:18:39 2012] Mean tdetx,y = (4138.97, 4610.14)
[Sat Feb 11 12:18:39 2012] chipx,y range = (485.00-524.00, 977.00-1013.00)
[Sat Feb 11 12:18:39 2012] Size of ../../acisf12392/products/events/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 35 counts
[Sat Feb 11 12:18:40 2012] Not generating rmf since there are only 30 counts
[Sat Feb 11 12:18:40 2012] arf not found, will run specextract
[Sat Feb 11 12:19:08 2012] ../../acisf12392/products/spectra/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7.warf not found
[Sat Feb 11 12:19:08 2012] ../../acisf12392/products/spectra/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7.wrmf not found
[Sat Feb 11 12:19:08 2012] Removal of ../../acisf12392/products/spectra/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7.soff failed
[Sat Feb 11 12:30:58 2012] Spectrum 7 has only 30 counts, deleting rmf
[Sat Feb 11 12:30:58 2012] 177.505
[Sat Feb 11 13:36:25 2012] Updating aperture counts using extracted products
[Sat Feb 11 13:36:25 2012] Error reading totcts from fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Feb 11 13:36:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 13:36:25 2012] Using photon index=1.80, rate=0.000452, arf fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7.arf
[Sat Feb 11 13:36:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 13:36:25 2012] Updating source flux to 5.8e-15
[Sat Feb 11 13:36:39 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 11 13:36:40 2012] acisf12392/analysis//spectral/fullrun_ccd1_acisf12392_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete