[Mon Dec 19 18:21:27 2011] Detection parameters:
  Position = (1143.2, 743.4) = 5 36 32.86 -6 44 21.2
  Extent = 0.8" x 0.5", rotation angle = 163 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.0003 +/- 9e-05

[Mon Dec 19 18:21:27 2011] Off-axis axis estimate = 3.12'
[Mon Dec 19 18:31:10 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 18:31:10 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Mon Dec 19 18:31:10 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.752
[Mon Dec 19 18:31:10 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.60"
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src9.ximg exists
[Mon Dec 19 18:45:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src9.csv
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Dec 19 18:45:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src9.csv
[Mon Dec 19 18:45:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Dec 19 18:45:09 2011] Fit fullrun_ccd6_acisf12391_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Dec 19 19:02:51 2011] Spatial fit model total counts = 12.175200, observed total counts = 13.000000
[Mon Dec 19 19:02:51 2011] Offset between fit and detection position for source 2 = 0.712772 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.712772 pixels
  Position = (1143.2, 744.1) = 5 36 32.88 -6 44 21.1
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Mon Dec 19 19:02:51 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 19:02:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 19:02:51 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 19:02:51 2011] Source does appear to be extended
[Mon Dec 19 19:02:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 19:25:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 19:25:07 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Mon Dec 19 19:25:07 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.815
[Mon Dec 19 19:25:07 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.84"
[Mon Dec 19 19:39:23 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src9.ximg exists
[Mon Dec 19 19:39:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src9.csv
[Mon Dec 19 19:39:23 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Dec 19 19:39:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src9.csv
[Mon Dec 19 19:39:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 19:39:24 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Dec 19 19:39:24 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Dec 19 19:39:24 2011] Fit fullrun_ccd6_acisf12391_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Dec 19 19:57:28 2011] Spatial fit model total counts = 11.185800, observed total counts = 12.000000
[Mon Dec 19 19:57:28 2011] Offset between fit and detection position for source 2 = 0.507108 pixels
[Mon Dec 19 19:57:28 2011] 11.210600 total counts/ 0.000000 bgd. counts: snr = 482956270602117.312500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.507108 pixels
  Position = (1143.7, 743.9) = 5 36 32.86 -6 44 21.1
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 11.2 +/- 3.3
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Mon Dec 19 19:57:28 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 19:57:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 19:57:28 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 19:57:28 2011] Source does appear to be extended
[Mon Dec 19 19:57:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 19:58:38 2011] Writing source region out to fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2_src.reg
[Mon Dec 19 19:58:38 2011] Extracting stamp from image fullrun_ccd6_acisf12391_pi14-548_cl_sm2.00.img.gz, (1101, 701) - (1186, 787)
[Mon Dec 19 19:58:38 2011] Writing fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2.gif
[Mon Dec 19 20:03:21 2011] Size of ../../acisf12391/products/events/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2_src.evt.gz[events] = 12 counts
[Mon Dec 19 20:03:21 2011] Mean chipx,y = (925.83, 270.00)
[Mon Dec 19 20:03:21 2011] Mean tdetx,y = (3800.83, 1972.00)
[Mon Dec 19 20:03:21 2011] chipx,y range = (904.00-938.00, 253.00-280.00)
[Mon Dec 19 20:03:21 2011] Size of ../../acisf12391/products/events/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 22 counts
[Mon Dec 19 20:03:22 2011] Not generating rmf since there are only 11 counts
[Mon Dec 19 20:03:22 2011] arf not found, will run specextract
[Mon Dec 19 20:03:44 2011] ../../acisf12391/products/spectra/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2.warf not found
[Mon Dec 19 20:03:44 2011] ../../acisf12391/products/spectra/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2.wrmf not found
[Mon Dec 19 20:03:44 2011] Removal of ../../acisf12391/products/spectra/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2.soff failed
[Mon Dec 19 20:06:17 2011] Spectrum 2 has only 11 counts, deleting rmf
[Mon Dec 19 20:06:17 2011] 202.794
[Mon Dec 19 20:12:11 2011] Updating aperture counts using extracted products
[Mon Dec 19 20:12:11 2011] Error reading totcts from fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Dec 19 20:12:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 20:12:11 2011] Using photon index=1.80, rate=0.000279, arf fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src2.arf
[Mon Dec 19 20:12:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Dec 19 20:12:11 2011] Updating source flux to 3e-15
[Mon Dec 19 20:12:19 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting