[Mon Dec 19 18:21:27 2011] Detection parameters:
  Position = (621.9, 1092.4) = 5 36 50.08 -6 41 29.4
  Extent = 3.0" x 2.1", rotation angle = 10 degrees
  Source counts = 406.5 +/- 21.2
  Background counts = 44.5
  Rate = 0.01 +/- 0.0005

[Mon Dec 19 18:21:27 2011] Off-axis axis estimate = 8.08'
[Mon Dec 19 18:31:10 2011] Using EEF radius (= 2.89 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 18:31:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 18:31:10 2011] Initial guess for spatial extent in simple fitting = 2.89"
[Mon Dec 19 18:31:10 2011] source mask rpix=5.9, npix_max = 161, mask sum = 156, frac = 0.963
[Mon Dec 19 18:31:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.89"
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src1.ximg exists
[Mon Dec 19 18:45:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src1.csv
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Dec 19 18:45:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src1.csv
[Mon Dec 19 18:45:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12391_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 18:45:09 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 18:45:09 2011] Fit fullrun_ccd6_acisf12391_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 19:02:51 2011] Spatial fit model total counts = 452.906000, observed total counts = 450.000000
[Mon Dec 19 19:02:51 2011] Offset between fit and detection position for source 13 = 0.718529 pixels
[Mon Dec 19 19:02:51 2011] 452.699900 total counts/ 29.723900 bgd. counts: snr = 77.582332
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.718529 pixels
  Position = (622.5, 1092.8) = 5 36 50.07 -6 41 29.5
  Extent = 3.7 (3.4-4.0)", rotation angle = 0
  Source counts = 423.0 +/- 21.3
  Background counts = 29.7
  Rate = 0.01 +/- 0.0005
[Mon Dec 19 19:02:51 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 19:02:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 19:02:51 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 19:02:51 2011] Source does appear to be extended
[Mon Dec 19 19:02:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 19:25:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 19:25:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 19:25:07 2011] Initial guess for spatial extent in simple fitting = 3.73"
[Mon Dec 19 19:25:07 2011] source mask rpix=7.6, npix_max = 261, mask sum = 272, frac = 1.042
[Mon Dec 19 19:25:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.73"
[Mon Dec 19 19:39:23 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src1.ximg exists
[Mon Dec 19 19:39:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src1.csv
[Mon Dec 19 19:39:23 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Dec 19 19:39:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src1.csv
[Mon Dec 19 19:39:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12391_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 19:39:23 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 19:39:23 2011] fullrun_ccd6_acisf12391_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 19:39:23 2011] Fit fullrun_ccd6_acisf12391_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 19:57:28 2011] Spatial fit model total counts = 464.001000, observed total counts = 464.000000
[Mon Dec 19 19:57:28 2011] Offset between fit and detection position for source 13 = 0.281479 pixels
[Mon Dec 19 19:57:28 2011] 463.788900 total counts/ 32.929900 bgd. counts: snr = 75.082714
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.281479 pixels
  Position = (622.2, 1092.8) = 5 36 50.08 -6 41 29.5
  Extent = 3.8 (3.5-4.1)", rotation angle = 0
  Source counts = 430.9 +/- 21.5
  Background counts = 32.9
  Rate = 0.01 +/- 0.0005
[Mon Dec 19 19:57:28 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 19:57:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 19:57:28 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 19:57:28 2011] Source does appear to be extended
[Mon Dec 19 19:57:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 19:58:37 2011] Writing source region out to fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13_src.reg
[Mon Dec 19 19:58:37 2011] Extracting stamp from image fullrun_ccd6_acisf12391_pi14-548_cl_sm2.00.img.gz, (448, 918) - (797, 1267)
[Mon Dec 19 19:58:37 2011] Writing fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13.gif
[Mon Dec 19 19:58:39 2011] Size of ../../acisf12391/products/events/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13_src.evt.gz[events] = 458 counts
[Mon Dec 19 19:58:39 2011] Mean chipx,y = (307.04, 125.89)
[Mon Dec 19 19:58:39 2011] Mean tdetx,y = (3182.04, 1827.89)
[Mon Dec 19 19:58:39 2011] chipx,y range = (272.00-345.00, 86.00-163.00)
[Mon Dec 19 19:58:39 2011] Size of ../../acisf12391/products/events/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 321 counts
[Mon Dec 19 19:58:40 2011] rmf not found, will run specextract
[Mon Dec 19 19:58:40 2011] arf not found, will run specextract
[Mon Dec 19 19:58:57 2011] ../../acisf12391/products/spectra/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13.warf not found
[Mon Dec 19 19:58:57 2011] ../../acisf12391/products/spectra/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13.wrmf not found
[Mon Dec 19 19:58:57 2011] Removal of ../../acisf12391/products/spectra/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13.soff failed
[Mon Dec 19 20:06:17 2011] Keeping rmf generated by specextract
[Mon Dec 19 20:06:17 2011] 173.364
[Mon Dec 19 20:12:11 2011] Updating aperture counts using extracted products
[Mon Dec 19 20:12:11 2011] Error reading totcts from fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13_src.pi.gz
[Mon Dec 19 20:12:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 20:12:11 2011] Using photon index=1.80, rate=0.0107, arf fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13.arf
[Mon Dec 19 20:12:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Dec 19 20:12:11 2011] Updating source flux to 1.3e-13
[Mon Dec 19 20:12:23 2011] Reading fit data from acisf12391/analysis//spectral/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13_pl.csv
[Mon Dec 19 20:12:23 2011] Spectral fit parameter nH value = 4.90677e+21
[Mon Dec 19 20:12:23 2011] Spectral fit parameter PhoIndex value = 2.66485
[Mon Dec 19 20:12:23 2011] Failed to get F(0.3-8.0) from acisf12391/analysis//spectral/fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 20:12:23 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 20:12:23 2011] Using Nh = 4.9e+21, photon index=2.66, rate=0.0107, arf fullrun_ccd6_acisf12391_pi14-548_pass1_cl_src13.arf
[Mon Dec 19 20:12:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Dec 19 20:12:23 2011] Updating source flux to 1e-13