[Mon Apr 30 03:12:00 2012] Detection parameters:
  Position = (336.3, 398.7) = 20 32 9.31 40 19 12.4
  Extent = 0.5" x 0.5", rotation angle = 12 degrees
  Source counts = 20.3 +/- 4.6
  Background counts = 0.7
  Rate = 0.0005 +/- 0.0001

[Mon Apr 30 03:12:02 2012] Off-axis axis estimate = 3.58'
[Mon Apr 30 04:50:39 2012] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 04:50:39 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Apr 30 04:50:39 2012] source mask rpix=1.4, npix_max = 15, mask sum = 8, frac = 0.527
[Mon Apr 30 04:50:39 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 0.71"
[Mon Apr 30 06:03:42 2012] fullrun_ccd3_acisf12390_pi14-548_cl_pass0_src35.ximg exists
[Mon Apr 30 06:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12390_pi14-548_cl_pass0_src35.csv
[Mon Apr 30 06:03:42 2012] fullrun_ccd3_acisf12390_pi14-548_cl_pass0_src35_1.ximg exists
[Mon Apr 30 06:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12390_pi14-548_cl_pass0_src35.csv
[Mon Apr 30 06:03:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12390_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12390_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 06:03:42 2012] fullrun_ccd3_acisf12390_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Mon Apr 30 06:03:42 2012] fullrun_ccd3_acisf12390_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Apr 30 06:03:42 2012] Fit fullrun_ccd3_acisf12390_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Mon Apr 30 06:04:09 2012] Spatial fit model total counts = 46.681200, observed total counts = 49.000000
[Mon Apr 30 06:04:09 2012] Offset between fit and detection position for source 49 = 0.875465 pixels
[Mon Apr 30 06:04:09 2012] 48.058630 total counts/ 4.644530 bgd. counts: snr = 20.144659
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.875465 pixels
  Position = (337.0, 398.3) = 20 32 9.30 40 19 12.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 43.4 +/- 6.9
  Background counts = 4.6
  Rate = 0.001 +/- 0.0002
[Mon Apr 30 06:04:09 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 06:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 06:04:09 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 06:04:09 2012] Source does appear to be extended
[Mon Apr 30 06:04:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 07:30:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Apr 30 07:30:52 2012] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Apr 30 07:30:52 2012] source mask rpix=1.0, npix_max = 9, mask sum = 4, frac = 0.419
[Mon Apr 30 07:30:52 2012] Skipping simple spatial due to low active detector fraction
[Mon Apr 30 08:35:29 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 08:35:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 08:35:29 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 08:35:29 2012] Source does appear to be extended
[Mon Apr 30 08:35:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 09:50:57 2012] Writing source region out to fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49_src.reg
[Mon Apr 30 09:50:57 2012] Extracting stamp from image fullrun_ccd3_acisf12390_pi14-548_cl_sm2.00.img.gz, (313, 375) - (361, 422)
[Mon Apr 30 09:50:57 2012] Writing fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49.gif
[Mon Apr 30 10:09:27 2012] Size of ../../acisf12390/products/events/fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49_src.evt.gz[events] = 44 counts
[Mon Apr 30 10:09:27 2012] Mean chipx,y = (646.11, 711.77)
[Mon Apr 30 10:09:27 2012] Mean tdetx,y = (4420.23, 3707.11)
[Mon Apr 30 10:09:27 2012] chipx,y range = (626.00-662.00, 692.00-727.00)
[Mon Apr 30 10:09:27 2012] Size of ../../acisf12390/products/events/fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 15 counts
[Mon Apr 30 10:09:28 2012] Not generating rmf since there are only 43 counts
[Mon Apr 30 10:09:28 2012] arf not found, will run specextract
[Mon Apr 30 10:09:54 2012] ../../acisf12390/products/spectra/fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49.warf not found
[Mon Apr 30 10:09:54 2012] ../../acisf12390/products/spectra/fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49.wrmf not found
[Mon Apr 30 10:09:54 2012] Removal of ../../acisf12390/products/spectra/fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49.soff failed
[Mon Apr 30 10:40:16 2012] Spectrum 49 has only 43 counts, deleting rmf
[Mon Apr 30 10:40:16 2012] 179.683
[Mon Apr 30 10:40:57 2012] Updating aperture counts using extracted products
[Mon Apr 30 10:40:57 2012] Error reading totcts from fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49_src.pi.gz
[Mon Apr 30 10:40:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 10:40:58 2012] Using photon index=1.80, rate=0.00109, arf fullrun_ccd3_acisf12390_pi14-548_pass1_cl_src49.arf
[Mon Apr 30 10:40:58 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Apr 30 10:40:58 2012] Updating source flux to 1.8e-14
[Mon Apr 30 10:41:26 2012] Source 49 has fewer than 100.000000 counts, skipping spectral fitting