[Mon Apr 30 03:11:54 2012] Detection parameters:
  Position = (969.1, 181.4) = 20 32 26.66 40 17 19.7
  Extent = 0.5" x 0.5", rotation angle = 137 degrees
  Source counts = 26.9 +/- 5.3
  Background counts = 1.1
  Rate = 0.0007 +/- 0.0001

[Mon Apr 30 03:11:57 2012] Off-axis axis estimate = 0.99'
[Mon Apr 30 04:02:37 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 04:02:37 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Apr 30 04:02:37 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.927
[Mon Apr 30 04:02:37 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 0.38"
[Mon Apr 30 04:50:38 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass0_src18.ximg exists
[Mon Apr 30 04:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12390_pi14-548_cl_pass0_src18.csv
[Mon Apr 30 04:50:38 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass0_src18_1.ximg exists
[Mon Apr 30 04:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12390_pi14-548_cl_pass0_src18.csv
[Mon Apr 30 04:50:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12390_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12390_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 04:50:39 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Mon Apr 30 04:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12390_pi14-548_cl_pass0_tfrozen_src18.csv
[Mon Apr 30 04:50:39 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Apr 30 04:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12390_pi14-548_cl_pass0_tfrozen_src18.csv
[Mon Apr 30 04:50:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12390_pi14-548_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12390_pi14-548_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 06:04:00 2012] Spatial fit model total counts = 32.595200, observed total counts = 60.000000
[Mon Apr 30 06:04:00 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 06:04:00 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 06:04:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 06:04:00 2012] Assessing source extent using major
[Mon Apr 30 06:04:00 2012] Source does appear to be extended
[Mon Apr 30 06:04:00 2012] Computing asymmetry using major and minor axis, asym = 1.05
[Mon Apr 30 06:47:51 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 06:47:51 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Apr 30 06:47:51 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.927
[Mon Apr 30 06:47:51 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.38"
[Mon Apr 30 07:30:51 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass1_src18.ximg exists
[Mon Apr 30 07:30:51 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Apr 30 07:30:51 2012] Fit fullrun_ccd2_acisf12390_pi14-548_cl_pass1_src18 appears to have run properly
[Mon Apr 30 07:30:52 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Apr 30 07:30:52 2012] fullrun_ccd2_acisf12390_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Apr 30 07:30:52 2012] Fit fullrun_ccd2_acisf12390_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Apr 30 08:35:22 2012] Spatial fit model total counts = 58.110600, observed total counts = 60.000000
[Mon Apr 30 08:35:22 2012] Offset between fit and detection position for source 8 = 0.506979 pixels
[Mon Apr 30 08:35:22 2012] 58.682600 total counts/ 37.456400 bgd. counts: snr = 3.468241
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.506979 pixels
  Position = (969.3, 181.9) = 20 32 26.67 40 17 19.6
  Extent = 0.3 (0.2-0.3)", rotation angle = 0
  Source counts = 21.2 +/- 7.7
  Background counts = 37.5
  Rate = 0.0005 +/- 0.0002
[Mon Apr 30 08:35:22 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 08:35:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 08:35:22 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 08:35:22 2012] Source does appear to be extended
[Mon Apr 30 08:35:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 09:03:18 2012] Writing source region out to fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8_src.reg
[Mon Apr 30 09:03:18 2012] Extracting stamp from image fullrun_ccd2_acisf12390_pi14-548_cl_sm2.00.img.gz, (957, 169) - (982, 195)
[Mon Apr 30 09:03:18 2012] Writing fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8.gif
[Mon Apr 30 09:15:13 2012] Size of ../../acisf12390/products/events/fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8_src.evt.gz[events] = 25 counts
[Mon Apr 30 09:15:13 2012] Mean chipx,y = (159.32, 952.96)
[Mon Apr 30 09:15:13 2012] Mean tdetx,y = (4013.96, 3926.68)
[Mon Apr 30 09:15:13 2012] chipx,y range = (141.00-175.00, 937.00-970.00)
[Mon Apr 30 09:15:13 2012] Size of ../../acisf12390/products/events/fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 4 counts
[Mon Apr 30 09:15:14 2012] Not generating rmf since there are only 21 counts
[Mon Apr 30 09:15:14 2012] arf not found, will run specextract
[Mon Apr 30 09:15:43 2012] ../../acisf12390/products/spectra/fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8.warf not found
[Mon Apr 30 09:15:43 2012] ../../acisf12390/products/spectra/fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8.wrmf not found
[Mon Apr 30 09:15:43 2012] Removal of ../../acisf12390/products/spectra/fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8.soff failed
[Mon Apr 30 09:50:56 2012] Spectrum 8 has only 21 counts, deleting rmf
[Mon Apr 30 09:50:56 2012] 195.77
[Mon Apr 30 10:40:55 2012] Updating aperture counts using extracted products
[Mon Apr 30 10:40:55 2012] Error reading totcts from fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8_src.pi.gz
[Mon Apr 30 10:40:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 10:40:56 2012] Using photon index=1.80, rate=0.000532, arf fullrun_ccd2_acisf12390_pi14-548_pass1_cl_src8.arf
[Mon Apr 30 10:40:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Apr 30 10:40:56 2012] Updating source flux to 8.3e-15
[Mon Apr 30 10:41:13 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Mon Apr 30 10:41:13 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting