[Mon Apr 30 03:11:52 2012] Detection parameters:
  Position = (754.4, 316.8) = 20 31 50.75 40 9 57.3
  Extent = 1.0" x 0.8", rotation angle = 104 degrees
  Source counts = 1036.1 +/- 33.2
  Background counts = 65.9
  Rate = 0.03 +/- 0.0008

[Mon Apr 30 03:11:52 2012] Off-axis axis estimate = 9.08'
[Mon Apr 30 03:39:17 2012] Using EEF radius (= 3.65 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 03:39:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Apr 30 03:39:17 2012] Initial guess for spatial extent in simple fitting = 3.65"
[Mon Apr 30 03:39:17 2012] source mask rpix=7.4, npix_max = 250, mask sum = 225, frac = 0.898
[Mon Apr 30 03:39:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.65"
[Mon Apr 30 04:02:36 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass0_src1.ximg exists
[Mon Apr 30 04:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12390_pi14-548_cl_pass0_src1.csv
[Mon Apr 30 04:02:36 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Apr 30 04:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12390_pi14-548_cl_pass0_src1.csv
[Mon Apr 30 04:02:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12390_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12390_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 04:02:36 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Apr 30 04:02:36 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Apr 30 04:02:36 2012] Fit fullrun_ccd1_acisf12390_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Apr 30 06:03:55 2012] Spatial fit model total counts = 1450.820000, observed total counts = 1451.000000
[Mon Apr 30 06:03:55 2012] Offset between fit and detection position for source 23 = 2.478136 pixels
[Mon Apr 30 06:03:55 2012] 1006.039700 total counts/ 66.713700 bgd. counts: snr = 115.002910
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.478136 pixels
  Position = (755.0, 319.2) = 20 31 50.75 40 9 58.2
  Extent = 2.5 (2.3-2.7)", rotation angle = 0
  Source counts = 939.3 +/- 31.7
  Background counts = 66.7
  Rate = 0.02 +/- 0.0008
[Mon Apr 30 06:03:55 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 06:03:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 06:03:55 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 06:03:55 2012] Source does appear to be extended
[Mon Apr 30 06:03:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 06:03:55 2012] Source is confused with source 1
[Mon Apr 30 06:28:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Apr 30 06:28:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Apr 30 06:28:17 2012] Initial guess for spatial extent in simple fitting = 2.50"
[Mon Apr 30 06:28:17 2012] source mask rpix=5.1, npix_max = 124, mask sum = 120, frac = 0.966
[Mon Apr 30 06:28:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.50"
[Mon Apr 30 06:47:51 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass1_src1.ximg exists
[Mon Apr 30 06:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12390_pi14-548_cl_pass1_src1.csv
[Mon Apr 30 06:47:51 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Apr 30 06:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12390_pi14-548_cl_pass1_src1.csv
[Mon Apr 30 06:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12390_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12390_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 06:47:51 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Apr 30 06:47:51 2012] fullrun_ccd1_acisf12390_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Apr 30 06:47:51 2012] Fit fullrun_ccd1_acisf12390_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Apr 30 08:35:16 2012] Spatial fit model total counts = 1408.910000, observed total counts = 1411.000000
[Mon Apr 30 08:35:16 2012] Offset between fit and detection position for source 23 = 0.657694 pixels
[Mon Apr 30 08:35:16 2012] 601.835000 total counts/ 106.435000 bgd. counts: snr = 48.019073
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.657694 pixels
  Position = (754.8, 318.6) = 20 31 50.76 40 9 57.9
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 495.4 +/- 24.5
  Background counts = 106.4
  Rate = 0.01 +/- 0.0006
[Mon Apr 30 08:35:16 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 08:35:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 08:35:16 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 08:35:16 2012] Source does appear to be extended
[Mon Apr 30 08:35:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 08:53:08 2012] Writing source region out to fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23_src.reg
[Mon Apr 30 08:53:08 2012] Extracting stamp from image fullrun_ccd1_acisf12390_pi14-548_cl_sm2.00.img.gz, (692, 255) - (818, 382)
[Mon Apr 30 08:53:08 2012] Writing fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23.gif
[Mon Apr 30 08:53:10 2012] Size of ../../acisf12390/products/events/fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23_src.evt.gz[events] = 1049 counts
[Mon Apr 30 08:53:10 2012] Mean chipx,y = (731.38, 285.93)
[Mon Apr 30 08:53:10 2012] Mean tdetx,y = (4846.07, 4838.38)
[Mon Apr 30 08:53:10 2012] chipx,y range = (706.00-758.00, 260.00-312.00)
[Mon Apr 30 08:53:10 2012] Size of ../../acisf12390/products/events/fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 154 counts
[Mon Apr 30 08:53:12 2012] rmf not found, will run specextract
[Mon Apr 30 08:53:12 2012] arf not found, will run specextract
[Mon Apr 30 08:53:36 2012] ../../acisf12390/products/spectra/fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23.warf not found
[Mon Apr 30 08:53:36 2012] ../../acisf12390/products/spectra/fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23.wrmf not found
[Mon Apr 30 08:53:36 2012] Removal of ../../acisf12390/products/spectra/fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23.soff failed
[Mon Apr 30 09:03:17 2012] Keeping rmf generated by specextract
[Mon Apr 30 09:03:17 2012] 165.628
[Mon Apr 30 10:40:55 2012] Updating aperture counts using extracted products
[Mon Apr 30 10:40:55 2012] Error reading totcts from fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23_src.pi.gz
[Mon Apr 30 10:40:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 10:40:55 2012] Using photon index=1.80, rate=0.0124, arf fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23.arf
[Mon Apr 30 10:40:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Apr 30 10:40:55 2012] Updating source flux to 2.2e-13
[Mon Apr 30 10:41:09 2012] Flag c found in src. 23 procflags, skipping spectral fitting
[Mon Apr 30 10:41:13 2012] Reading fit data from acisf12390/analysis//spectral/fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23_pl.csv
[Mon Apr 30 10:41:13 2012] Spectral fit parameter nH value = 4.88826e+21
[Mon Apr 30 10:41:13 2012] Spectral fit parameter PhoIndex value = 2.41661
[Mon Apr 30 10:41:13 2012] Failed to get F(0.3-8.0) from acisf12390/analysis//spectral/fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23_pl.csv, possibly due to different flux energy range selected
[Mon Apr 30 10:41:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 10:41:13 2012] Using Nh = 4.9e+21, photon index=2.42, rate=0.0124, arf fullrun_ccd1_acisf12390_pi14-548_pass1_cl_src23.arf
[Mon Apr 30 10:41:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Apr 30 10:41:13 2012] Updating source flux to 1.4e-13